System Booster/System Booster.iso/Texteditors/Origami/Sources/doc/manual.MS

Text File | 1996-09-27 | 175.9 KB | 6,151 lines

.\"{{{}}}
.\"{{{  Notes
.\" I wrote this manual using Origami, groff 1.08 and the -ms macros.
.\" It documents *everything* of Origami, so it is worth to have read it
.\" at least once to get an overview about all features.
.\"
.\" Michael Haardt
.\"}}}
.\"{{{  roff definitions
.\" Although I hate macros in documents, there does not seem
.\" to be another way for this manual.  I hope that these macros
.\" will work with every existing roff and -ms package.
.\"
.\"{{{  index
.\"{{{  iX simple index
.de iX
.if \n(tM .tm .iX \\n% \\$1
..
.\"}}}
.\"{{{  eX example index
.de eX
.if \n(tM .tm .eX \\n% \\$1
..
.\"}}}
.\"{{{  dX definition index
.de dX
.if \n(tM .tm .dX \\n% \\$1
..
.\"}}}
.\"}}}
.\"{{{  nH
.ds h1
.de nH
.if \\$1==1 \{\
.ds h1 \\$2
.bp
.\}
.NH \\$1
\\$2
.if \n(tM \{\
.tm .tC \\n% \\$1 \\$2
.iX "\\$2"
.\}
..
.\"}}}
.\"{{{  macros for items (can be nested):  header, indented body
.\"{{{  internal item macros, not used outside these definitions
.\"{{{  set vars to not in item
.nr PD 1v
.nr iT 0
.\"}}}
.\"{{{  .hI: header of item
.de hI
.KS
.LP
..
.\"}}}
.\"{{{  .tI: text for item
.de tI
.ie \\n(iT \{\
.RS .4c
.\}
.el .RS .75c
.nr PD .2v
.LP
.nr PD .3v
.nr iT 1+\\n(iT
..
.\"}}}
.\"{{{  .eI: end item
.de eI
.RE
.KE
.nr iT \\n(iT-1
.if !\\n(iT .nr PD 1v
..
.\"}}}
.\"}}}
.\"{{{  item with header    bI Ib
.de bI
.hI
\\$1
.tI
..
.de Ib
.eI
..
.\"}}}
.\"{{{  item without header nI In
.de nI
.KS
.tI
..
.de In
.eI
..
.\"}}}
.\"{{{  item without body   sI Is
.de sI
.hI
\\$1
.ie \\n(iT .RS .5c
.el .RS .75c
.nr iT 1+\\n(iT
..
.de Is
.eI
..
.\"}}}
.\"}}}
.\"{{{  warning
.de wA
.LP
\fBWarning\fP:
..
.\"}}}
.\"{{{  note beside
.de nB
.LP
\fBN.B.\fP:
..
.\"}}}
.\"{{{  some text-variables
.\"{{{  our official home in netland :)
.ds ac @pool.informatik.rwth-aachen.de
.\"}}}
.\"{{{  TEX
.ds Tx T\v'2p'E\v'-2p'X
.\"}}}
.\"{{{  page footer/header
.ds LH User Guide
.ds CH - % -
.ds RH \\*(h1
.ds LF Origami >>>MAJOR_VERSION<<<.>>>MINOR_VERSION<<<.>>>REVISION<<<
.ds CF - % -
.ds RF October 1993
.\"}}}
.\"}}}
.\"{{{  text-macros, need later, but do not know exactly when, so defined here
.\"{{{  warning, about counting lines
.de lC
.wA
the line count begins at beginning of file.  Versions older than 1.6.17 used
the top of entered fold as the starting point for counting!
..
.\"}}}
.\"{{{  the text for exit-codes and environment variables
.nr sS 0
.de sS
.ie \\n(sS \{\
.LP
.iX >>>ORIFILE<<<
.iX >>>ORILINE<<<
.iX >>>ORIWORD<<<
.iX >>>ORIXPOS<<<
.iX >>>ORIYPOS<<<
.iX >>>ORIPID<<<
\\$1 uses the same environment, shell and exit handling as \\*(eV.
.\}
.el \{\
.ds eV \\$1
.nr sS 1
.LP
.dX >>>ORIFILE<<<
.dX >>>ORILINE<<<
.dX >>>ORIWORD<<<
.dX >>>ORIXPOS<<<
.dX >>>ORIYPOS<<<
.dX >>>ORIPID<<<
.LP
If command line option \fB\-S\fP\fIshell\fP is given, \fIshell\fP is used (the
empty word for \fIshell\fP disables this command).  Otherwise environment
variable \fB>>>SHELL<<<\fP (default for \fB>>>SHELL<<<\fP, if empty or not
defined is \fB>>>BOURNE_SHELL<<<\fP) is used to get the shell name.
.LP
The exit code of the called command is stored in the OCL-variable
\fB>>>OCL_ARG_V<<<\fP (\-1, if no correct value can be given).
Environment variables \fB>>>ORIFILE<<<\fP, \fB>>>ORILINE<<<\fP and
\fB>>>ORIWORD<<<\fP are set to current filename, textline and word.
Word is the sequence of \fBa\fP..\fBzA\fP..\fBZ_\fP, where the cursor
stands on.  Environment variables \fB>>>ORIXPOS<<<\fP and
\fB>>>ORIYPOS<<<\fP are set to x position (characters 1,..) and y
position (line 1,..) in file.  Environment variable \fB>>>ORIPID<<<\fP
is set to Origami's process id.
.lC
.\}
..
.\"}}}
.\"{{{  prompt-commands do not store in define-macro-mode
.de pM
.wA
if \\$1 is called during \fB>>>O_DEF_MACRO<<<\fP is active, the given input
will not be stored in the macro!  This command does not activate the
\fBbegin-\fP / \fB>>>PRO_OUT<<<\fP, because you can do it explicitly
in the OCL-code.
..
.\"}}}
.\"{{{  editor_files
.de eF
.LP
.iX "editor files"
\\$1 adds the file to the list of edited files, if the file is not in
this list.
..
.\"}}}
.\"}}}
.\"}}}
.\"{{{  Title, abstract and tc
.\"{{{  Title
.TL
.LG
Origami
.SM
.br
User Guide
.br
.br
.AU
Michael Haardt
u31b3hs\*(ac
.AI
R\(:utscherstra\(sse 155/1703
52072 Aachen
Germany
.\"}}}
.\"{{{  abstract
.AB
This document describes all the functions of Origami and the syntax and
semantics of its control language OCL.  The first part describing the
Origami commands is intended to be read by new users, who need more than
just a description of bindings as given in the reference cards.  The
second part is intended for OCL programmers.  It is very usefull
if you would like to create or modify bindings.  This document assumes
that you are familiar with the folding concept, as described in the
introduction manual.
.AE
.\"}}}
.\"{{{  table of contents
.so tc.AMS
.\"}}}
.\"}}}
.\"{{{  Using Origami
.nH 1 "Using Origami"
.\"{{{  Getting started
.nH 2 "Getting Started"
.LP
It is assumed that Origami is installed and ready to use on your system.
It is invoked by typing \fBorigami\fP at the system prompt.  Filenames
may be typed after \fBorigami\fP \(em if this is not done a prompt for a
filename will be issued.
.LP
If Origami recognizes filenames, starting with a symbolic home directory
(marked with \fB~\fP[\fIusername\fP]), Origami tries to use the
corresponding path instead.  Therefore the \fBpasswd\fP database is
read, if \fIusername\fP is given or the value of environment variable
\fB>>>HOME<<<\fP is used.
.LP
If you have not installed any resource files yourself, Origami will
startup with default files, installed in your Origami directory.  The
resources files can be changed.  Look in chapter \fBProgramming in
OCL\fP for more details.
.\"{{{  linelength
.LP
.dX linelength
Origami can handle lines up to >>>LINELEN<<< characters.  Reading file with
longer lines will break these lines.  In this case, a warning appears at
the bottom of the screen.
.\"}}}
.\"{{{  ctrl-char
.LP
.iX ctrl-char
.iX "null character"
.iX display
Control characters will be displayed as \fB>>>CTRL_MARK<<<\fP followed
by the ASCII coding of the character (\fB>>>CTRL_CHARS<<<\fP for 0..31).
The null character cannot be handled properly for internal reasons (C
strings!).  Everything following the null character will be ignored.
newline will cause a line break.  It cannot be used as input.  Use
>>>O_RETURN<<< instead.  The delete character 127 will be displayed
\fB>>>CTRL_MARK<<<?\fP.
.\"}}}
.\"{{{  highbit-chars
.LP
.iX high-bit
.iX hex
.iX octal
.iX ctrl-char
.iX display
Characters with set highbit can be displayed octal or hex, using command
line option \fB\-d\fP\fImode\fP.  ctrl-chars can be displayed in the
same way.
.\"}}}
.\"{{{  tabs + spaces
.iX tab
.iX space
.iX display
The tab character can be displayed in different ways (default is
\fB\-t8\fP), depending on the chosen command line option:
.bI "\fB\-t 0\fP:"
Handle as normal control character.
.Ib
.bI "\fB\-t\fP \fIn\fP, \fIn\fP>0:"
Display tab as whitespace.
.Ib
.LP
Tabs are not allowed in front of fold lines or before indentation level of the
current fold.
.LP
Spaces and tabs at end of line will be deleted when editing a line!
Trailing spaces and tabs will only remain in the text, if the concerning
lines are not changed and the lines are not inside indented folds.
otherwise Origami strips all these characters on writing the file.
.\"}}}
.\"{{{  permission and viewmode
.LP
.iX view-mode
If you do not have write permission for the specified file, Origami will
enter view only mode.  Look at the manual page for advanced command
line options.
.\"}}}
.\"{{{  directories
.LP
.iX directory
.iX >>>MATCH_HIST<<<
.iX >>>NO_MATCH_HIST<<<
If the current file is a directory, Origami will use a list of filed
folds for each directory entry as text.  Command line options \fB\-f\fP
and \fB\-F\fP can be used, to control, which files will be shown.  The
corresponding regular expressions can be changed, by changing the
values in histories \fB>>>MATCH_HIST<<<\fP and \fB>>>NO_MATCH_HIST<<<\fP.
The OCL variable \fB>>>DIRED_VAR<<<\fP can be set to non-zero, to
get directory displays in long format.
.\"}}}
.\"}}}
.\"{{{  The screen format
.nH 2 "The Screen Format"
.LP
.iX screen
.\"{{{  statusline
.dX "status line"
.iX language
.iX modes
On starting an Origami session, a status line appears near the bottom of
the screen.  This line will probably remain throughout your edit session
and any prompts or warnings issued by the editor will appear below this
line. If you use multiple buffers you will see several other status lines,
one for each open buffer. These status lines tell you which buffer is active
(selected) and divide the windows into the buffers from each other.
.\"{{{  modes in statusline
.LP
.iX >>>O_A_ECHO<<<
If you started typing a key sequence bound to a command, this sequence
will be displayed under the status line, as well.   If the second
character of the line is a star, your file contains unsaved changes.
The current language and the active modes are indicated in parentheses:
.\"{{{  table of modes
.dX >>>FOLD_TAG<<<
.dX >>>sFOLD_TAG<<<
.dX >>>DM_TAG<<<
.dX >>>sDM_TAG<<<
.dX >>>VIEW_TAG<<<
.dX >>>sVIEW_TAG<<<
.dX >>>OVER_TAG<<<
.dX >>>sOVER_TAG<<<
.dX >>>AUTO_TAG<<<
.dX >>>sAUTO_TAG<<<
.dX >>>NOPAR_TAG<<<
.dX >>>sNOPAR_TAG<<<
.dX >>>DV_TAG<<<
.dX >>>sDV_TAG<<<
.dX >>>BREGEXP_TAG<<<
.dX >>>sBREGEXP_TAG<<<
.dX >>>XREGEXP_TAG<<<
.dX >>>sXREGEXP_TAG<<<
.dX >>>H_SHIFT_TAG<<<
.iX no-parse-mode
.iX >>>O_CREATE_FOLD<<<
.iX hash-shift-mode
.iX view-mode
.iX overwrite-mode
.iX autosave-mode
.iX no-parse-mode
.iX directory
.iX regular expression
.nI
.TS
tab(|);
l l l.
long|short|meaning
\fB>>>BREGEXP_TAG<<<\fP|\fB>>>sBREGEXP_TAG<<<\fP|basic regular expressions active
\fB>>>XREGEXP_TAG<<<\fP|\fB>>>sXREGEXP_TAG<<<\fP|extended regular expressions active
\fB>>>FOLD_TAG<<<\fP|\fB>>>sFOLD_TAG<<<\fP|creating a fold
\fB>>>DM_TAG<<<\fP|\fB>>>sDM_TAG<<<\fP|defining a keyboard macro
\fB>>>VIEW_TAG<<<\fP|\fB>>>sVIEW_TAG<<<\fP|Origami is in view only mode.
\fB>>>OVER_TAG<<<\fP|\fB>>>sOVER_TAG<<<\fP|Origami is in overwrite mode.
\fB>>>AUTO_TAG<<<\fP|\fB>>>sAUTO_TAG<<<\fP|Origami is in auto save mode.
\fB>>>H_SHIFT_TAG<<<\fP|\fB>>>H_SHIFT_TAG<<<\fP|Origami is in hash shift mode
\fB>>>NOPAR_TAG<<<\fP|\fB>>>sNOPAR_TAG<<<\fP|Origami is in no-parse mode.
\fB>>>DV_TAG<<<\fP|\fB>>>sDV_TAG<<<\fP|Current file is a directory.
.TE
.In
.\"}}}
.LP
.iX >>>O_A_POSI<<<
.iX linelength
If the position display mode is active (\fB>>>O_A_POSI<<<\fP), the
current line and column is displayed in front of the filename.   The
column is the screen coordinate, not the text coordinate.   Values
greater than the linelength (>>>LINELEN<<<) are possible, if the current
line contains characters, which are displayed with more than one
character (tabs or control characters).
.\"}}}
.\"{{{  long status line
.LP
.iX "long status line"
If the statusline is too long, the short forms are used and in language
\fBUser\fP, only the first >>>SHORT_F_C_LENGTH<<< characters are shown
(a cut string will be marked with a trailing \fB$\fP).   If required,
Origami tries to cut the path and displays `\fB>>>CUT_PATH<<<\fP'
instead of the omitted part of the path.
.\"}}}
.\"{{{  name
.LP
If there is a name defined in your keybinding file, it is displayed to the
left of the version number
(>>>MAJOR_VERSION<<<.>>>MINOR_VERSION<<<.>>>REVISION<<<) instead of
`\fBOrigami\fP'.
.\"}}}
.\"{{{  -W
.LP
If Origami was started with command line option '\fB\-W\fP
\fIstring\fP', \fIstring\fP will be displayed in front of the filename.
.\"}}}
.\"}}}
.\"{{{  buffers
.LP
.dX buffer
.dX "status line"
.iX prompt
Origami can edit more than one file at a time.  For this, the screen is
split into windows.  Each of these windows displays one of the files
being edited.  Each of the windows has a status line.  The active
buffer has a normal statusline.  The other buffer show only filename and
file-change-status.  If more than one buffer is used, each statusline
starts with the number of the buffer.  Prompts and warnings still
appear at the bottom of the screen.
.\"}}}
.\"{{{  prompts
.LP
.iX history
.iX prompt
.iX >>>FILE_HIST<<<
.iX >>>SHELL_HIST<<<
.iX >>>SEARCH_HIST<<<
.iX >>>REPL_HIST<<<
.iX >>>MISC_HIST<<<
Various prompts have a history implemented, which can be used with the
\fB>>>O_UP<<<\fP and \fB>>>O_DOWN<<<\fP commands.  These histories can
take up to >>>HISTORY_MAX<<< lines, but Origami can reduce the size of
this histories to >>>HISTORY_SIZE<<<, if the memory is needed.  There
are different histories for commands concerning: shell, search,
replace, files and miscellanous things.
.\"{{{  allowed commands in prompts
Inside prompts only a subset of Origami edit functions is allowed:
.iX >>>O_LEFT<<<
.iX >>>O_START_OF_LINE<<<
.iX >>>O_RIGHT<<<
.iX >>>O_END_OF_LINE<<<
.iX >>>O_DELETE<<<
.iX >>>O_RETURN<<<
.iX >>>O_DOWN<<<
.iX >>>O_UP<<<
.iX >>>O_FILE_C<<<
.iX >>>TEST_END_LINE<<<
.iX >>>TEST_BEGIN_LINE<<<
.iX >>>TEST_CHAR_SET<<<
.iX >>>TEST_CHAR_LOW_C<<<
.iX >>>TEST_CHAR_HIGH_C<<<
.iX >>>TEST_CHAR_C<<<
.iX >>>TEST_STR<<<
.iX >>>STORE_CHAR<<<
.iX >>>O_UNDEL_CHAR<<<
.iX >>>O_TOGGLE_CASE<<<
.TS
l l.
\fB>>>O_LEFT<<<\fP
\fB>>>O_START_OF_LINE<<<\fP
\fB>>>O_RIGHT<<<\fP
\fB>>>O_END_OF_LINE<<<\fP
\fB>>>O_DELETE<<<\fP
\fB>>>O_UNDEL_CHAR<<<\fP
\fB>>>O_FILE_C<<<\fP
\fB>>>O_RETURN<<<\fP|end the input, current text is used
any text characters
\fB>>>O_UP<<<\fP
\fB>>>O_DOWN<<<\fP

\fB>>>TEST_BEGIN_LINE<<<\fP
\fB>>>TEST_END_LINE<<<\fP
\fB>>>TEST_CHAR_SET<<<\fP
\fB>>>TEST_CHAR_LOW_C<<<\fP
\fB>>>TEST_CHAR_HIGH_C<<<\fP
\fB>>>TEST_CHAR_C<<<\fP
\fB>>>TEST_STR<<<\fP
\fB>>>STORE_CHAR<<<\fP
\fB>>>O_TOGGLE_CASE<<<\fP
.TE
.\"}}}
.\"}}}
.\"}}}
.\"{{{  The special editor buffers
.nH 2 "The Special Editor Buffers"
.LP
.dX "move buffer"
.dX "kill buffer"
.dX "pick buffer"
.dX "delete buffer"
.iX TDS
There are three special buffers in Origami.  The `move buffer' contains
one text line, the `kill buffer' in which several lines can be collected
before inserting them back into the file, and the `delete buffer', which
holds the last >>>UNDEL_LINES<<< deleted lines (in each case a line can be a closed
fold, with all its contents).  The behaviour of these buffers in Origami
is slightly different from TDS (INMOS Transputer Development System)
\(em move, delete and kill buffers are lost on exit from Origami.  These
buffers are neither displayed, nor do they have status lines.
.nB
the \fBkill-buffer\fP was named \fBpick-buffer\fP in TDS/Multitool and
old versions of Origami.
.\"}}}
.\"{{{  Processing Origami files
.nH 2 "Processing Origami Files"
.LP
.iX mark
.iX comment
.iX folding
If a saved file is to pass through a particular compiler, the fold
structure must be hidden from the compiler by writing it as comments.
Origami hides the fold-markers by adding up to >>>FOLD_COMMENT_LENGTH<<<
characters to the start and end of the fold-marker.  As comments differ
from one language to another, it is necessary to choose the language
before saving a new file for the first time.  When reading a file back
into Origami the language type is retained.  As a consequence you should
take care not to include compiler comments within the fold header, as this
will lead to nested comments which are not allowed in some languages.
.LP
The general technique for hiding a fold is:
.\"{{{  example
.eX folding
.eX comment
.eX C
.DS
\&{\&{\&{  this is a fold
\&.\&.\&.F  this is a filed fold for file xyz.a
\&}\&}\&}
.DE
appears as
.DS
/*\&{\&{\&{  this is a fold*/
  /*\&{\&{\&{F this is a filed fold for file xyz.a*/
  /*\&:\&:\&:F xyz.a*/
  /*\&}\&}\&}  */
/*\&}\&}\&}  */
.DE
in the text file (language >>>LANG_C<<<).
.LP
Origami marks the used comment language with a special line.  This line
will appear in front of the first fold or at end of file (unless
language >>>LANG_None<<< is active):
.DS
/*\&{\&{\&{\&}\&}\&}*/
.DE
if language >>>LANG_C<<< is active.
.\"}}}
.LP
Origami knows the following languages, to hide fold-markers:
.\"{{{  table of values for comments
.nI
>>>LANG_LIST<<<
.In
.\"}}}
.\"}}}
.\"{{{  Inmos files
.nH 2 ">>>LANG_Inmos<<< Files"
.iX >>>LANG_Inmos<<<
.iX transputer
.iX TDS
.LP
The binary >>>LANG_Inmos<<< files can be edited without losing information.
There are some restrictions on editing >>>LANG_Inmos<<< files:
.sI "Lines are limited in length to >>>TDS_LEN<<<."
.Is
.bI "Filed folds:"
Origami cannot open filed folds, only entering is possible.
.LP
Origami does not automatically remove files belonging to deleted filed
folds and does not generate unique filenames on filing folds.
.Ib
.bI "\fBEXE\fP, \fBLIB\fP, .. :"
Origami is not able to create special fold-types automatically, but can
handle existing ones properly.  You can use a OCL-command to set
fold-type and fold-contents within a function or macro to integer
values.
.Ib
.bI ">>>LANG_Inmos<<< and ASCII-files:"
Since version 1.6.31, the ASCII-format (using fold-languages \fBNONE\fP,
\fBC\fP, .. ) for >>>LANG_Inmos<<< files has changed.  The differences concern only
the additional fold attributes (like \fBEXE\fP, \fBSC\fP, .. ).  The new
format should be able to save >>>LANG_Inmos<<< files with another language without
loss of information, but we cannot guarantee this feature!  Check this
in your environment, before using it widely.
.LP
Changing the language from >>>LANG_Inmos<<< to another one and writing the file
only changes the current file.  Included filed-folds will not be
changed by this!
.Ib
.bI ">>>LANG_Inmos<<< and trailing spaces or tabs"
.iX space
If language >>>LANG_Inmos<<< is used, all trailing spaces or tabs are removed while
reading/writing files.
.Ib
.\"}}}
.\"}}}
.\"{{{  All Origami functions
.nH 1 "All Origami functions"
.LP
.dX "origami functions"
This chapter lists all Origami functions with their keybind names.  If
you want to create a new keybinding, examine the files \fB???.keys\fP in
the \fBbindings\fP directory of your Origami distribution.
.\"{{{  moving around
.nH 2 "Moving around"
.\"{{{  >>>O_LEFT<<<
.sI \fB>>>O_LEFT<<<\fP
.Is
.dX >>>O_LEFT<<<
.\"}}}
.\"{{{  >>>O_RIGHT<<<
.sI \fB>>>O_RIGHT<<<\fP
.Is
.dX >>>O_RIGHT<<<
.\"}}}
.\"{{{  >>>O_UP<<<
.sI \fB>>>O_UP<<<\fP
.Is
.dX >>>O_UP<<<
.\"}}}
.\"{{{  >>>O_DOWN<<<
.sI \fB>>>O_DOWN<<<\fP
.Is
.dX >>>O_DOWN<<<
.\"}}}
.\"{{{  >>>O_START_OF_LINE<<<
.sI \fB>>>O_START_OF_LINE<<<\fP
.Is
.dX >>>O_START_OF_LINE<<<
.\"}}}
.\"{{{  >>>O_END_OF_LINE<<<
.sI \fB>>>O_END_OF_LINE<<<\fP
.Is
.dX >>>O_END_OF_LINE<<<
.\"}}}
.\"{{{  >>>O_PAGE_UP<<<
.sI \fB>>>O_PAGE_UP<<<\fP
.Is
.dX >>>O_PAGE_UP<<<
.\"}}}
.\"{{{  >>>O_PAGE_DOWN<<<
.sI \fB>>>O_PAGE_DOWN<<<\fP
.Is
.dX >>>O_PAGE_DOWN<<<
.\"}}}
.\"{{{  >>>O_TOP_OF_FOLD<<<
.bI "\fB>>>O_TOP_OF_FOLD<<<\fP"
.dX >>>O_TOP_OF_FOLD<<<
Moves to the beginning of the entered fold.
.Ib
.\"}}}
.\"{{{  >>>O_BOT_OF_FOLD<<<
.bI "\fB>>>O_BOT_OF_FOLD<<<\fP"
.dX >>>O_BOT_OF_FOLD<<<
Moves to the end of the entered fold.
.Ib
.\"}}}
.\"{{{  >>>O_GOTO_LINE<<<
.bI "\fB>>>O_GOTO_LINE<<<\fP"
.dX >>>O_GOTO_LINE<<<
Prompts for a line number and moves the cursor to this line.  If needed,
Origami opens closed folds to reach this line.
.lC
.Ib
.\"}}}
.\"}}}
.\"{{{  folding
.nH 2 "Folding"
.iX folding
.\"{{{  >>>O_OPEN_FOLD<<<
.bI "\fB>>>O_OPEN_FOLD<<<\fP"
.dX >>>O_OPEN_FOLD<<<
Open fold and show the contents in the context of the current level.
.wA
.iX TDS
unlike TDS, you can not open file folds, only entering them is allowed.
.Ib
.\"}}}
.\"{{{  >>>O_CLOSE_FOLD<<<
.bI "\fB>>>O_CLOSE_FOLD<<<\fP"
.dX >>>O_CLOSE_FOLD<<<
If the cursor is located within an opened fold, close this fold.
.Ib
.\"}}}
.\"{{{  >>>O_ENTER_FOLD<<<
.bI "\fB>>>O_ENTER_FOLD<<<\fP"
.dX >>>O_ENTER_FOLD<<<
Enter the fold at the current line.  That means, show only the contents
of this fold such that this fold starts at indentation 0 - the First
characters on each line are left at the extreme left of the logical
window.    If the line is a normal fold the x position of the cursor is
preserved.  This may mean that a long line upon which the cursor has been
placed is scrolled out to the left.
.LP
Entering a filed fold saves the current file and switches to the new
one.  The cursor is moved to the top left hand corner of
the Logical window.  The old file and the line are stored internally.
.eF "\fB>>>O_ENTER_FOLD<<<\fP"
.LP
.iX TDS
Unlike TDS, using this function on normal text lines is allowed.
Origami uses the string between the cursor position and the next single
quote, double quote, whitespace or tab as filename.  If Origami cannot
open the file, it will prompt for a filename (empty filename uses
current file!).  The file will be entered as if there was a filed fold
for it.
.wA
since version \fB1.6.85\fP, Origami tries to open
\&'\fIdirname(current-file)/filename\fP', if the given filed-fold file
cannot be found using the current working directory.
.Ib
.\"}}}
.\"{{{  >>>O_EXIT_FOLD<<<
.bI "\fB>>>O_EXIT_FOLD<<<\fP"
.dX >>>O_EXIT_FOLD<<<
Exit fold. Show the entered fold as closed fold and the surrounding text
again.
.LP
Exiting a filed fold saves the file, if required.
.LP
.iX "editor files"
Using this function, without having entered a fold, will edit a list of
all command line files and edited files shown as folds.  The cursor is
moved to the line, containing the entry for the current file.
.Ib
.\"}}}
.\"{{{  >>>O_REMOVE_FOLD<<<
.bI "\fB>>>O_REMOVE_FOLD<<<\fP"
.dX >>>O_REMOVE_FOLD<<<
Remove fold at the current line \(em deletes the fold structure and
inserts the contents of the fold instead.
.Ib
.\"}}}
.\"{{{  >>>O_CREATE_FOLD<<<
.bI "\fB>>>O_CREATE_FOLD<<<\fP"
.dX >>>O_CREATE_FOLD<<<
.iX >>>M_O_VAR<<<
Create fold.  Use twice \(em first to indicate the top of a new fold,
then to indicate its bottom.  Lines to be included within the fold must
not be indented less than the fold itself.  Tabs are not allowed at the
beginning of the folded lines if they appear before the intended
indentation of the fold.  Several other keys are disabled while
>>>O_CREATE_FOLD<<< is active.  The part of the text, which would be
highlighted, is displayed inverse.
.LP
The OCL variable \fB>>>M_O_VAR<<<\fP can be used to modify the semantics of
\fB>>>O_CREATE_FOLD<<<\fP:
.bI "\fB>>>M_O_VAR<<<\fP=\fB0\fP"
Normal folding, as described above.
.Ib
.bI "\fB>>>M_O_VAR<<<\fP=\fB1\fP"
Do not fold, but highlight the text, as if folding. Keys, not allowed
during folding, are also disabled here.
.Ib
.bI "\fB>>>M_O_VAR<<<\fP=\fB2\fP"
Do not fold, but highlight all text between calling position for
\fB>>>O_CREATE_FOLD<<<\fP and cursor position.  Keys, not allowed during
folding, are also disabled here.
.Ib
.bI "\fB>>>M_O_VAR<<<\fP=\fB3\fP"
Do not fold, but highlight a rectangle text block between calling
position for \fB>>>O_CREATE_FOLD<<<\fP and cursor position.  Keys, not allowed
during folding, are also disabled here.
.Ib
.bI "\fB>>>M_O_VAR<<<\fP=\fB4\fP"
Do not fold, set highlighting mode but do not highlight anything.  Keys,
not allowed during folding, are also disabled here.
.Ib
.bI "\fB>>>M_O_VAR<<<\fP=\fB5\fP"
Like default \fB>>>O_CREATE_FOLD<<<\fP (\fB>>>M_O_VAR<<<\fP=\fB0\fP),
but do not highlight anything.
.Ib
.bI "\fB>>>M_O_VAR<<<\fP=\fB\-\fP\fIx\fP, \fB1\fP<=\fIx\fP<=\fB4\fP"
Like \fB>>>M_O_VAR<<<\fP=\fIx\fP, but the command restrictions are weaker.  The
additional allowed commands are slowed down by the screen handling
routines.
.Ib
.bI "other values"
The behaviour is undefined.
.Ib
.nB
the value of \fB>>>M_O_VAR<<<\fP for the second \fB>>>O_CREATE_FOLD<<<\fP call is
ignored!
.Ib
.\"}}}
.\"{{{  >>>O_FIRST_LINE_TO_FOLD_H<<<
.bI "\fB>>>O_FIRST_LINE_TO_FOLD_H<<<\fP"
.dX >>>O_FIRST_LINE_TO_FOLD_H<<<
When the cursor is on a opened/closed fold this key will copy the first
line enclosed by that fold to the fold line.
.Ib
.\"}}}
.\"{{{  >>>O_FILE_FOLD<<<
.bI "\fB>>>O_FILE_FOLD<<<\fP"
.dX >>>O_FILE_FOLD<<<
File (create a new file) or unfile a fold.  Creating a file writes the
contents of the fold into a new file named by the fold comment (up to
the first whitespace or tab).  Unlike TDS, Origami does not create a new
filename if the chosen one is already used.  It does not matter if you
change the fold comment after filing a fold, because the filename is
stored internally.  Unfiling a filed fold replaces the file link with
the contents of the file itself.
.LP
.iX TDS
Unlike TDS Origami does not remove the original file included this way.
.Ib
.\"}}}
.\"{{{  >>>O_ATTACH_FILE<<<
.bI "\fB>>>O_ATTACH_FILE<<<\fP"
.dX >>>O_ATTACH_FILE<<<
Attach a file to a fold.  This function links an existing file rather
than creating a new one (and thus differs from toggle-create-file-fold).
The filename is taken from the comment of the empty fold the cursor is
placed on.  The filename starts behind the foldmark and ends at the
first whitespace or tab.  The rest of the line is ignored.  After
attaching files you can change the fold header because the file
information is stored internally.
.LP
If the cursor is on a filed fold line, the file will be detached from
the fold.
.wA
detaching a file may loose the information about the filename.  Fold
comment and filename may differ!  Type and contents of the fold will be
reset to the default values!
.wA
since version \fB1.6.85\fP, Origami tries to attach
\&'\fIdirname(current-file)/filename\fP', if the given file cannot be
found using the current working directory.  In this case, the filename
will also be changed in the fold comment!
.Ib
.\"}}}
.\"}}}
.\"{{{  editing
.nH 2 "Editing"
.\"{{{  >>>O_DEL_LINE<<<
.bI "\fB>>>O_DEL_LINE<<<\fP"
.dX >>>O_DEL_LINE<<<
Deletes the current line, pushing it onto the delete buffer.
The delete buffer is a stack with depth >>>UNDEL_LINES<<< lines.
.Ib
.\"}}}
.\"{{{  >>>O_UNDEL_LINE<<<
.bI "\fB>>>O_UNDEL_LINE<<<\fP"
.dX >>>O_UNDEL_LINE<<<
Pop a line from the delete buffer and paste it into the current file
above the current line.  The delete buffer is a stack with depth
>>>UNDEL_LINES<<< lines.
.Ib
.\"}}}
.\"{{{  >>>O_DELETE<<<
.bI "\fB>>>O_DELETE<<<\fP"
.dX >>>O_DELETE<<<
Deletes the character to the left of the cursor.  If the cursor was at
the left margin, this line will be appended to the previous line.
.Ib
.\"}}}
.\"{{{  >>>O_UNDEL_CHAR<<<
.bI "\fB>>>O_UNDEL_CHAR<<<\fP"
.dX >>>O_UNDEL_CHAR<<<
Undeletes the last deleted character.  This stored character is only
changed by the \fB>>>O_DELETE<<<\fP command.
.Ib
.\"}}}
.\"{{{  >>>O_TOGGLE_CASE<<<
.bI "\fB>>>O_TOGGLE_CASE<<<\fP"
.dX >>>O_TOGGLE_CASE<<<
Changes the case of the character under the cursor.
.Ib
.\"}}}
.\"{{{  >>>O_RETURN<<<
.bI "\fB>>>O_RETURN<<<\fP"
.dX >>>O_RETURN<<<
Opens the line at cursor position and indents the right part like the
left part.
.Ib
.\"}}}
.\"{{{  >>>O_PICK<<<
.bI "\fB>>>O_PICK<<<\fP"
.dX >>>O_PICK<<<
.iX TDS
Removes a line from the file and adds it to the end of the kill buffer.
Note that the `kill buffer' is lost when exiting Origami, unlike TDS.
.Ib
.\"}}}
.\"{{{  >>>O_COPY_PICK<<<
.bI "\fB>>>O_COPY_PICK<<<\fP"
.dX >>>O_COPY_PICK<<<
.iX TDS
Copies a line to the end of the kill buffer without deleting it from the
file.  Note that the kill buffer is lost when exiting Origami, unlike
TDS.  Lines containing filed folds cannot be copied to the kill buffer,
while language \fB>>>LANG_Inmos<<<\fP is active.
.Ib
.\"}}}
.\"{{{  >>>O_PUT_PICK<<<
.bI "\fB>>>O_PUT_PICK<<<\fP"
.dX >>>O_PUT_PICK<<<
Places the kill buffer before the current line as a fold with no
comment.
.Ib
.\"}}}
.\"{{{  >>>O_MOVE<<<
.bI "\fB>>>O_MOVE<<<\fP"
.dX >>>O_MOVE<<<
If the move buffer is empty, the current line is moved to the move
buffer.  Otherwise the move buffer is inserted before the current line.
Note that the move buffer is lost when exiting Origami, unlike TDS.
.Ib
.\"}}}
.\"{{{  >>>O_COPY<<<
.bI "\fB>>>O_COPY<<<\fP"
.dX >>>O_COPY<<<
Duplicates the current line in the file.  Lines containing filed folds
cannot be duplicated, while language \fB>>>LANG_Inmos<<<\fP is active.
.Ib
.\"}}}
.\"{{{  >>>O_FILTER_LINE<<<
.bI "\fB>>>O_FILTER_LINE<<<\fP"
.dX >>>O_FILTER_LINE<<<
Pipes the current line through a filter.  If the current line is a
closed fold, the contents of this fold is filtered.  If the current line
is a normal text line, this text will be filtered.  This command has no
effect on any other sort of line, other than to report its failure with
a message.  The standard output of the filter will be inserted at the
position of the line.  The line itself will be deleted.  The text read
from the filter will be parsed for folds as expected.
.sS \fB>>>O_FILTER_LINE<<<\fP
.Ib
.\"}}}
.\"}}}
.\"{{{  search & replace
.nH 2 "Search and replace"
.\"{{{  >>>O_FIND<<<
.bI "\fB>>>O_FIND<<<\fP"
.dX >>>O_FIND<<<
Prompts for a search string and moves the cursor to the next occurance.  The
pattern is searched in the currently entered fold.
.Ib
.\"}}}
.\"{{{  >>>O_FIND_REVERSE<<<
.bI "\fB>>>O_FIND_REVERSE<<<\fP"
.dX >>>O_FIND_REVERSE<<<
Same as \fB>>>O_FIND<<<\fP, but searches backward.
.Ib
.\"}}}
.\"{{{  >>>O_REPLACE<<<
.bI "\fB>>>O_REPLACE<<<\fP"
.dX >>>O_REPLACE<<<
Asks for a search and a replace string and replaces all occurances of the search string
with the replace string.  The replace will be done in the currently entered fold.
.Ib
.\"}}}
.\"{{{  >>>O_QUERY_REPLACE<<<
.bI "\fB>>>O_QUERY_REPLACE<<<\fP"
.dX >>>O_QUERY_REPLACE<<<
Same as \fB>>>O_REPLACE<<<\fP, but asks before replacing.
.Ib
.\"}}}
.\"{{{  >>>O_ITS_SEARCH<<<
.bI "\fB>>>O_ITS_SEARCH<<<\fP"
.dX >>>O_ITS_SEARCH<<<
.iX >>>O_RETURN<<<
.iX >>>O_UP<<<
.iX >>>O_LEFT<<<
.iX >>>O_ITS_REVERSE<<<
.iX >>>O_FIND_REVERSE<<<
.iX >>>O_DOWN<<<
.iX >>>O_DELETE<<<
.iX >>>O_RIGHT<<<
.iX incremental-search
.iX >>>O_FIND<<<
Searches the text for a string.  String can be entered incrementally.
\fB>>>O_DELETE<<<\fP jumps to the position where the character was added
to the search string.  Adding a character tries to find the new string.
Aborting this command jumps to the calling position.  \fB>>>O_RETURN<<<\fP
ends the search.  \fB>>>O_LEFT<<<\fP, \fB>>>O_ITS_REVERSE<<<\fP and
\fB>>>O_FIND_REVERSE<<<\fP switch the search direction to backwards and
search the string.  \fB>>>O_RIGHT<<<\fP, \fB>>>O_ITS_SEARCH<<<\fP and
\fB>>>O_FIND<<<\fP switch the search direction to forward and search the
string.  \fB>>>O_UP<<<\fP and \fB>>>O_DOWN<<<\fP walk through the search
history to get other patterns.  The pattern is searched in the currently
entered fold.
.LP
Using \fB>>>O_LEFT<<<\fP, \fB>>>O_ITS_REVERSE<<<\fP, \fB>>>O_FIND_REVERSE<<<\fP,
\fB>>>O_DOWN<<<\fP, \fB>>>O_RIGHT<<<\fP, \fB>>>O_ITS_SEARCH<<<\fP,
\fB>>>O_FIND<<<\fP or \fB>>>O_DELETE<<<\fP as first input inside the
incremental search initializes the search pattern with the last used
pattern.  \fB>>>O_ITS_SEARCH<<<\fP uses \fB>>>O_GOTO_LINE<<<\fP to reach the
search position if it is not already on the screen.
.nB
.iX regular expression
while basic or extended regular expression search is active and the
given string is not a valid expression, the cursor will not moved, until
the string is a valid regular expression! Origami uses the same position
stack mechanism as without regular expression search.
.Ib
.\"}}}
.\"{{{  >>>O_ITS_REVERSE<<<
.bI "\fB>>>O_ITS_REVERSE<<<\fP"
.dX >>>O_ITS_REVERSE<<<
Same as \fB>>>O_ITS_SEARCH<<<\fP, but starts with search direction
backwards.
.Ib
.\"}}}
.wA
Searching reverse is slower then searching forward!  Multiple calls of the
pattern matching algorithm are neccessary, to find a match in front of
the cursor position!
.\"}}}
.\"{{{  files
.nH 2 "Files"
.\"{{{  >>>O_OPEN_NEW_FILE<<<
.bI "\fB>>>O_OPEN_NEW_FILE<<<\fP"
.dX >>>O_OPEN_NEW_FILE<<<
Reads another file for editing, saving the current one if required.  If
no filename is given, the current file is reread.
.eF "\fB>>>O_OPEN_NEW_FILE<<<\fP"
.Ib
.\"}}}
.\"{{{  >>>O_OPEN_BUFFER<<<
.bI "\fB>>>O_OPEN_BUFFER<<<\fP"
.dX >>>O_OPEN_BUFFER<<<
.iX buffer
Split the current window and prompt for the file, to be edited in the new
buffer. The new buffer will be opened below the old buffer.
.LP
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is not 0, the new buffer will be
opened:
.\"{{{  1=above
.bI "\fB>>>M_O_VAR<<<\fP=\fB1\fP"
open above the current buffer
.Ib
.\"}}}
.\"{{{  -1=above and devnull
.bI "\fB>>>M_O_VAR<<<\fP=\fB\-1\fP"
open above the current buffer
.br
do not ask for a file but open \fB/dev/null\fP
.Ib
.\"}}}
.\"{{{  -2=devnull
.bI "\fB>>>M_O_VAR<<<\fP=\fB\-2\fP"
do not ask for a file but open \fB/dev/null\fP
.Ib
.\"}}}
.eF "\fB>>>O_OPEN_BUFFER<<<\fP"
.Ib
.\"}}}
.\"{{{  >>>O_OPEN_W_BUFFER<<<
.bI "\fB>>>O_OPEN_W_BUFFER<<<\fP"
.dX >>>O_OPEN_W_BUFFER<<<
.iX buffer
Split the current window into two adjacent windows and prompt for the
file, to be edited in the new buffer.  The new buffer will be opened to
the right of the old buffer.
.LP
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is not 0, the new buffer will be opened to the
left of the old buffer.
.eF "\fB>>>O_OPEN_W_BUFFER<<<\fP"
.Ib
.\"}}}
.\"{{{  >>>O_OPEN_LIST_FILE<<<
.bI "\fB>>>O_OPEN_LIST_FILE<<<\fP"
.dX >>>O_OPEN_LIST_FILE<<<
Reads another file from list of edited files for editing, saving the
current one if required. If the given number to low (high),
\fB>>>O_OPEN_LIST_FILE<<<\fP uses the last (first) file in the list.
\fB>>>O_OPEN_LIST_FILE<<<\fP tries to reach the same line, you were the
last time, you edited this file.
.LP
.iX >>>M_B_VAR<<<
If OCL variable \fB>>>M_B_VAR<<<\fP is set to not null,
\fB>>>O_OPEN_LIST_FILE<<<\fP will not ask for the number and use the
value \fB\-( >>>M_B_VAR<<< 1)\fP.
.Ib
.\"}}}
.\"{{{  >>>O_OPEN_LIST_BUFFER<<<
.bI "\fB>>>O_OPEN_LIST_BUFFER<<<\fP"
.dX >>>O_OPEN_LIST_BUFFER<<<
.iX buffer
Split the current window and prompt for the file number to be edited in the
new buffer, which will be opened below the current buffer.
.LP
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is not 0, the new buffer will be opened above the old
buffer.
.Ib
.\"}}}
.\"{{{  >>>O_OPEN_LIST_W_BUFFER<<<
.bI "\fB>>>O_OPEN_LIST_W_BUFFER<<<\fP"
.dX >>>O_OPEN_LIST_W_BUFFER<<<
.iX buffer
Split the current window into two adjacent windows  and prompt for the
file number to be edited in the new buffer.
.LP
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is not 0, the new buffer will be opened to the
left of the old buffer.
.Ib
.\"}}}
.\"{{{  >>>O_ENTER_NO_FILE<<<
.bI "\fB>>>O_ENTER_NO_FILE<<<\fP"
.dX >>>O_ENTER_NO_FILE<<<
Like \fB>>>O_ENTER_FOLD<<<\fP, but prompts for a number and enters the given
file from list of edited files.
.Ib
.\"}}}
.\"{{{  >>>O_SAVE_FILE<<<
.bI "\fB>>>O_SAVE_FILE<<<\fP"
.dX >>>O_SAVE_FILE<<<
Saves the current file with the current name and language.  This command
will only succeed if you have not entered a fold.
.nB
if Origami is in view mode, the file will not be saved, even if it was
changed.
.Ib
.\"}}}
.\"{{{  >>>O_WRITE_FILE<<<
.bI "\fB>>>O_WRITE_FILE<<<\fP"
.dX >>>O_WRITE_FILE<<<
Prompts for a filename and listing-mode.  If no filename is given, the
current filename will be used.  Origami writes the text to a new file
using the current language.  If listing-mode is set, the generated file
will be modified in the following way:
.iX comment
.iX mark
.DS
no heading \fIcomment\fP \fB{\&{\&{}\&}\&}\fP \fIcomment\fP line
no \fB{\&{\&{\fP in fold headers
no \fIcomment\fP \fB}\&}\&}\fP \fIcomment\fP lines
.DE
If listing-mode is set, the fold structure in the written file is lost.
While using the language \fB>>>LANG_Inmos<<<\fP it is impossible to set
listing-mode, because the the generated files have an incompatible
structure.
.Ib
.\"}}}
.\"{{{  >>>O_RENAME_FILE<<<
.bI "\fB>>>O_RENAME_FILE<<<\fP"
.dX >>>O_RENAME_FILE<<<
Prompts for a new name for the current file.  It will not ask for
permission, if the current file has been changed.  The file-change mode will
not be changed.  The stack of entered file folds is only changed for the
current file.
.Ib
.\"}}}
.\"{{{  >>>O_INSERT_FILE<<<
.bI "\fB>>>O_INSERT_FILE<<<\fP"
.dX >>>O_INSERT_FILE<<<
Insert File.  Prompts for a filename and imports this file into the
edited file at the current position.  If no filename is given, the
current filename is used.
.Ib
.\"}}}
.\"{{{  >>>O_FILTER_BUFFER<<<
.bI "\fB>>>O_FILTER_BUFFER<<<\fP"
.dX >>>O_FILTER_BUFFER<<<
Filters the current text.  Origami prompts for the name of a filter.
Origami tries to move the cursor back to the line on which the cursor
was placed before executing this command.  Entered folds will be left
before filtering!
.sS \fB>>>O_FILTER_BUFFER<<<\fP
.Ib
.\"}}}
.\"{{{  >>>O_PIPE_FROM_COMMAND<<<
.bI "\fB>>>O_PIPE_FROM_COMMAND<<<\fP"
.dX >>>O_PIPE_FROM_COMMAND<<<
Prompts for a command.  The command is executed and its standard output
inserted in the text at current position.
.sS \fB>>>O_PIPE_FROM_COMMAND<<<\fP
.Ib
.\"}}}
.\"{{{  >>>O_PIPE_TO_COMMAND<<<
.bI "\fB>>>O_PIPE_TO_COMMAND<<<\fP"
.dX >>>O_PIPE_TO_COMMAND<<<
Prompts for a command.  The current file will be piped to this command
as standard input.
.sS \fB>>>O_PIPE_TO_COMMAND<<<\fP
.Ib
.\"}}}
.\"}}}
.\"{{{  macros
.nH 2 "Macros"
.\"{{{  >>>O_DEF_MACRO<<<
.bI "\fB>>>O_DEF_MACRO<<<\fP"
.dX >>>O_DEF_MACRO<<<
.iX macro
Records all keys in the keyboard macro buffer until >>>O_DEF_MACRO<<< is
pressed again.  Calling user defined functions is also allowed during
>>>O_DEF_MACRO<<<.  \fB>>>O_DEF_MACRO<<<\fP cannot be executed while Origami prompts
for information for another function (like \fB>>>O_OPEN_NEW_FILE<<<\fP).  Origami
can store up to >>>MAX_MACRO_LENGTH<<< keys.
.Ib
.\"}}}
.\"{{{  >>>O_EXE_MACRO<<<
.bI "\fB>>>O_EXE_MACRO<<<\fP"
.dX >>>O_EXE_MACRO<<<
Call keyboard macro.
.Ib
.\"}}}
.\"{{{  >>>O_DEF_FIX<<<
.bI "\fB>>>O_DEF_FIX<<<\fP"
.dX >>>O_DEF_FIX<<<
Asks for the number of a fix macro buffer.  The contents of the keyboard
macro buffer is copied to this fix macro buffer.  Using \fB(>>>DEFMACRO<<< \&..
)\fP in keybind makes it impossible to overwrite the fix buffer.  Using
\fB\&(>>>DEFMYFIX<<<\fP \fIx\fP\fB)\fP in your OCL source places \fIx\fP
free macro buffers at places 1..\fIx\fP.
.Ib
.\"}}}
.\"{{{  >>>O_CALL_FIX<<< n
.bI "\fB>>>O_CALL_FIX<<<\fP \fIn\fP, (\fIn\fP=1,2,..)"
.dX >>>O_CALL_FIX<<<
Execute fix-macro number \fIn\fP.  This command should be used to call
macros defined by \fB>>>O_DEF_FIX<<<\fP.  All other macro buffers
are used by \fB(>>>DEFMACRO<<<\fP \fIfoo\fP \fB(...) )\fP and \fB(>>>KEYDEF<<<\fP
\fIfoo\fP \fB(...) )\fP in keybind, so that using these operations has
the same effect as calling the function/macro keysequence by their name!
.Ib
.\"}}}
.\"}}}
.\"{{{  shell commands
.nH 2 "Shell commands"
.\"{{{  >>>O_SHELL<<<
.bI "\fB>>>O_SHELL<<<\fP"
.dX >>>O_SHELL<<<
.iX >>>SHELL<<<
Creates a shell according.  Exiting from this shell will return to
Origami.
.sS \fB>>>O_SHELL<<<\fP
.Ib
.\"}}}
.\"{{{  >>>O_SHELL_COMMAND<<<
.bI "\fB>>>O_SHELL_COMMAND<<<\fP"
.dX >>>O_SHELL_COMMAND<<<
Prompts for a command and starts a shell which executes it.
.sS \fB>>>O_SHELL_COMMAND<<<\fP
.Ib
.\"}}}
.\"{{{  >>>O_SUSPEND<<<
.bI "\fB>>>O_SUSPEND<<<\fP"
.dX >>>O_SUSPEND<<<
If your system has job control, Origami will be suspended and the calling
shell is reactivated.
.nB
\fB>>>O_SUSPEND<<<\fP is disabled, if command line option \fB\-Z\fP is
used or the stop signal is disabled by stty.
.Ib
.\"}}}
.\"}}}
.\"{{{  arguments
.nH 2 "Arguments"
.LP
.iX argument
Like in Emacs, you can repeat each command by using an numerical
argument.  The first digit is given by \fBset-argument-\fP\fIdigit\fP.
These functions read more digits of the argument until you type a non
digit.  This non digit may be a key sequence bound to a command or just
a single character.  It will be repeated argument times.  Pressing the
abort key will abort the repeated execution.  \fBset-argument \fP\fIx\fP
stops the definition or execution of a keyboard macro!
.dX set-argument
.sI "\fB>>>O_REP_0<<<\fP ... \fB>>>O_REP_9<<<\fP"
.Is
.LP
If the argument is set to 0, the command will be executed once.
.\"}}}
.\"{{{  special functions
.nH 2 "Special functions"
.\"{{{  >>>O_FILE_C<<<
.bI "\fB>>>O_FILE_C<<<\fP"
.dX >>>O_FILE_C<<<
.iX >>>OCL_ARG_V<<<
If the cursor stands on a whitespace or tab, Origami tries to complete
the word left from the cursor as filename.  If the given word starts
with a \fB~\fP and does not contain any path-separator, Origami tries to
complete the user name.  The OCL variable \fB>>>OCL_ARG_V<<<\fP is set
to the number of added characters.  If the extended filename belongs to
a directory, a \fB/\fP will also be appended.
.Ib
.\"}}}
.\"{{{  >>>K_QUOTE<<<
.bI "\fB>>>K_QUOTE<<<\fP"
.dX >>>K_QUOTE<<<
The next character typed in will be inserted in your text, even if it is
bound to a command.
.Ib
.\"}}}
.\"{{{  >>>O_FLUSH<<<
.bI "\fB>>>O_FLUSH<<<\fP"
.dX >>>O_FLUSH<<<
Refresh the screen (after using \fB>>>SCROFF<<<\fP).
.Ib
.\"}}}
.\"{{{  >>>O_REFRESH<<<
.bI "\fB>>>O_REFRESH<<<\fP"
.dX >>>O_REFRESH<<<
Refresh and center screen.  Like \fB>>>O_FLUSH<<<\fP, but also resets
the window size.  If you are working with a window environment which
does not send a window changed signal, you may use this command after
resizing a window.
.LP
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is set to \fB0\fP, the whole screen will be
drawn (useful if the screen was messed up by messages...), otherwise
only the changes will be written.
.Ib
.\"}}}
.\"{{{  >>>O_GROW_BUFFER<<<
.bI \fB>>>O_GROW_BUFFER<<<\fP
.dX >>>O_GROW_BUFFER<<<
.iX buffer
Increase the height of the current buffer by 1.
.Ib
.\"}}}
.\"{{{  >>>O_SHRINK_BUFFER<<<
.bI \fB>>>O_SHRINK_BUFFER<<<\fP
.dX >>>O_SHRINK_BUFFER<<<
.iX buffer
Decrease the height of the current buffer by 1.  If \fB>>>O_OPEN_BUFFER<<<\fP or
If there are no (visible or invisible) height divisions the height of
the used part of the screen will be reduced.  This is only done, while
the current buffer uses more than >>>TXT_MIN_H<<< lines.
.Ib
.\"}}}
.\"{{{  >>>O_GROW_W_BUFFER<<<
.bI \fB>>>O_GROW_W_BUFFER<<<\fP
.dX >>>O_GROW_W_BUFFER<<<
.iX buffer
Increase the width of the current buffer by 1.
.Ib
.\"}}}
.\"{{{  >>>O_SHRINK_W_BUFFER<<<
.bI \fB>>>O_SHRINK_W_BUFFER<<<\fP
.dX >>>O_SHRINK_W_BUFFER<<<
.iX buffer
if Several buffers are present decrease the width of the buffer by 1.
If there are no (visible or invisible) width divisions, the width of the used
part of the screen is reduced.  This is only done, if the current buffer
uses more than >>>TXT_MIN_W<<< columns.
.Ib
.\"}}}
.\"{{{  >>>O_DESCRIBE_BINDINGS<<<
.bI "\fB>>>O_DESCRIBE_BINDINGS<<<\fP"
.dX >>>O_DESCRIBE_BINDINGS<<<
.iX >>>HOME<<<
.iX ".origami>>>RC_ENDING<<<"
Displays the binding information stored in $>>>HOME<<</.origami>>>RC_ENDING<<<.  All
currently recognized keyboard inputs will be printed.
There are some special keys, which can modify the display of the list:
.\"{{{  space
.bI "` '  (space)"
Move the screen one page up.
.Ib
.\"}}}
.\"{{{  prev-page
.bI "\fBB\fP or \fBb\fP"
Show the page before the current one.
.Ib
.\"}}}
.\"{{{  >>>O_RETURN<<<
.bI "\fB>>>O_RETURN<<<\fP"
.dX >>>O_RETURN<<<
Move the screen one line up.
.Ib
.\"}}}
.\"{{{  filter
.bI "\fBF\fP or \fBf\fP"
prompts for a pattern and starts the list display again.  Only lines
matching the pattern are displayed.  The empty pattern matches all
lines.
.Ib
.\"}}}
.\"{{{  search
.bI "\fBS\fP or \fBs\fP"
Prompts for a pattern and skips forward to the next line matching the
pattern.
.Ib
.\"}}}
.\"{{{  quit
.bI "\fBQ\fP or \fBq\fP"
Stop the help display.
.Ib
.\"}}}
.\"{{{  kill
.bI "\fBK\fP or \fBk\fP"
Like \fBQ\fP, but the current help view is copied to the kill buffer.  If
a pattern for filtering is used, only lines, matching this pattern will
be killed.
.Ib
.\"}}}
.nB
lines match a pattern, if the contain the pattern literaly.
.Ib
.\"}}}
.\"{{{  >>>O_HELP<<<
.bI "\fB>>>O_HELP<<<\fP"
.dX >>>O_HELP<<<
.iX >>>HOME<<<
.iX ".origami>>>HELP_ENDING<<<"
.iX ".origami>>>RC_ENDING<<<"
Displays the helpfile $>>>HOME<<</.origami>>>HELP_ENDING<<<.  Since there is no
default file for this function, you can create your own helpfile.  It
may be useful for new and very complicated functions/macros or other
things you always forget.  If there is no file $>>>HOME<<</.origami>>>HELP_ENDING<<<,
Origami tries to get the referencedata from >>>RC_ENDING<<< file.
.LP
You can use the same control keys as in \fB>>>O_DESCRIBE_BINDINGS<<<\fP.
.LP
.iX @>>>STARTREF_NO<<<
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is not set to  \fB0\fP,  the
corresponding special help entry, generated by \fB@>>>STARTREF_NO<<<\fP
will be shown.  Negative values for \fB>>>M_O_VAR<<<\fP are not allowed
and \fB>>>M_O_VAR<<<\fP will be set to \fB0\fP in these cases!
.Ib
.\"}}}
.\"{{{  >>>O_LANGUAGE<<<
.bI "\fB>>>O_LANGUAGE<<<\fP"
.dX >>>O_LANGUAGE<<<
.iX comment
.iX language
Allows you to select the language for which the code is to be saved \(em
ie the format in which folds are to be saved.  This can be done by
entering the first character of the language or by using
\fB>>>O_RIGHT<<<\fP, \fB>>>O_LEFT<<<\fP to move the menu
cursor, which starts on the currently used language (ie is displayed
inverse.)  If you choose \fBUser\fP, Origami prompts for the begin
comment and end comment strings used for hiding the fold comments.  Each
string can be up to >>>FOLD_COMMENT_LENGTH<<< characters in length.
.nB
if the current language is \fB>>>LANG_Inmos<<<\fP, Origami prompts for permission,
to prevent destruction of internal >>>LANG_Inmos<<< information.
.Ib
.\"}}}
.\"{{{  >>>O_FOLD_INFO<<<
.bI "\fB>>>O_FOLD_INFO<<<\fP"
.dX >>>O_FOLD_INFO<<<
.iX >>>OCL_ARG_V<<<
Displays information on current cursor position in file and the
character under the cursor as character and as octal,decimal and hex
number.  After this, the number of entered folds in current file,
indentation of currently entered fold and perhaps information about the
closed foldline under the cursor is displayed.  The fold information is
a pair of numbers.  The first number describes the fold type and the
second the fold contents (range 0..255).  These codings have specific
meanings in TDS.  The OCL-variable \fB>>>OCL_ARG_V<<<\fP is set to:
.nI
.TS
tab(|);
l l.
256*type+contents|if type<128
-(256*(type mod 128)+contents)|otherwise
.TE
.In
.lC
.Ib
.\"}}}
.\"{{{  modes
.iX modes
.\"{{{  >>>O_UNCHANGE<<<
.bI "\fB>>>O_UNCHANGE<<<\fP"
.dX >>>O_UNCHANGE<<<
Marks the file as unchanged.
.Ib
.\"}}}
.\"{{{  position
.bI "\fB>>>O_A_POSI<<<\fP"
.dX >>>O_A_POSI<<<
Display current position in front of the filename.
.Ib
.bI "\fB>>>O_D_POSI<<<\fP"
.dX >>>O_D_POSI<<<
Switch off the display of the current position.
.Ib
.\"}}}
.\"{{{  full-shift
.bI "\fB>>>O_A_FULLSHIFT<<<\fP"
.dX >>>O_A_FULLSHIFT<<<
.dX full-shift-mode
Activates full-shift mode. Moving over the right border of a buffer
scrolls the whole buffer, not only the current line!
.Ib
.bI "\fB>>>O_D_FULLSHIFT<<<\fP"
.iX >>>OCL_ARG_V<<<
.dX >>>O_D_FULLSHIFT<<<
.iX full-shift-mode
Switches full-shift mode off and set OCL variable \fB>>>OCL_ARG_V<<<\fP
to \fB1\fP, if mode \fBfull-shift\fP was active, otherwise \fB0\fP.
.Ib
.\"}}}
.\"{{{  edit/view
.dX view-mode
.bI "\fB>>>O_A_VIEW<<<\fP"
.dX >>>O_A_VIEW<<<
Sets view only mode.  Changing the file is not possible.
.Ib
.bI "\fB>>>O_D_VIEW<<<\fP"
.dX >>>O_D_VIEW<<<
Sets edit mode.
.Ib
.\"}}}
.\"{{{  insert/overwrite
.bI "\fB>>>O_A_OVER<<<\fP"
.dX >>>O_A_OVER<<<
.dX overwrite-mode
Sets overwrite mode.  Text input will overwrite other text.
.Ib
.bI "\fB>>>O_D_OVER<<<\fP"
.dX >>>O_D_OVER<<<
Sets insert mode.  Text input will be inserted.
.Ib
.\"}}}
.\"{{{  hash-shift
.bI "\fB>>>O_A_HASH<<<\fP"
.dX >>>O_A_HASH<<<
.dX hash-shift-mode
Activates hash-shift-mode (like command line option \fB\-p\fP).
On reading files, leading hashes are moved to fold indentation level and
on writing files, they will be moved to column 1. Useful for editing C
sources.
.nB
this mode is automatically switched on, if the parsed file contains  a
leading \fB#\fP in front of the fold indentation level!
.Ib
.bI "\fB>>>O_D_HASH<<<\fP"
.dX >>>O_D_HASH<<<
.iX hash-shift-mode
Switches hash-shift mode off.
.Ib
.\"}}}
.\"{{{  regular-expression-search
.bI \fB>>>O_A_B_REGEXP<<<\fP
.dX >>>O_A_B_REGEXP<<<
.iX regular expression
The search patterns in \fB>>>O_FIND<<<\fP, \fB>>>O_FIND_REVERSE<<<\fP,
\fB>>>O_ITS_SEARCH<<<\fP, \fB>>>O_ITS_REVERSE<<<\fP,
\fB>>>O_REPLACE<<<\fP and \fB>>>O_QUERY_REPLACE<<<\fP are read as basic
regular expressions (like vi).  OCL variable \fB>>>OCL_ARG_V<<<\fP is
set to \fB1\fP.
.Ib
.bI \fB>>>O_A_X_REGEXP<<<\fP
.dX >>>O_A_X_REGEXP<<<
.iX regular expression
The search patterns in \fB>>>O_FIND<<<\fP, \fB>>>O_FIND_REVERSE<<<\fP,
\fB>>>O_ITS_SEARCH<<<\fP, \fB>>>O_ITS_REVERSE<<<\fP, \fB>>>O_REPLACE<<<\fP
and \fB>>>O_QUERY_REPLACE<<<\fP are read as extended regular expressions
(like egrep).  OCL variable \fB>>>OCL_ARG_V<<<\fP is set to \fB2\fP.
.Ib
.bI \fB>>>O_D_REGEXP<<<\fP
.dX >>>O_D_REGEXP<<<
.iX >>>OCL_ARG_V<<<
.iX regular expression
The search patterns in \fB>>>O_FIND<<<\fP, \fB>>>O_FIND_REVERSE<<<\fP,
\fB>>>O_ITS_SEARCH<<<\fP, \fB>>>O_ITS_REVERSE<<<\fP,
\fB>>>O_REPLACE<<<\fP and \fB>>>O_QUERY_REPLACE<<<\fP are used literaly.
OCL variable \fB>>>OCL_ARG_V<<<\fP is set to:
.TS
tab(|);
c l.
Value|Active regular expressions
0|none
1|basic
2|extended
.TE
.Ib
.\"}}}
.\"{{{  echo on/off
.bI "\fB>>>O_A_ECHO<<<\fP"
.dX >>>O_A_ECHO<<<
Incomplete keysequences are displayed under the status line.
.Ib
.bI "\fB>>>O_D_ECHO<<<\fP"
.dX >>>O_D_ECHO<<<
Do not show unfinished keysequences.
.Ib
.\"}}}
.\"{{{  time on/off
.bI "\fB>>>O_A_TIME<<<\fP"
.dX >>>O_A_TIME<<<
Display the time right from the filename.
.nB
while Origami is waiting for a keyboard input, the display will not be
updated!
.Ib
.bI "\fB>>>O_D_TIME<<<\fP"
.dX >>>O_D_TIME<<<
.iX >>>OCL_ARG_V<<<
Do not display the time right from the filename.  OCL variable
\fB>>>OCL_ARG_V<<<\fP is set to 1(0), if time display was switched
on(off).
.Ib
.\"}}}
.\"{{{  verbose on/off
.bI "\fB>>>O_A_VERBOSE<<<\fP"
.dX >>>O_A_VERBOSE<<<
.iX verbose
Switch verbose-mode on. Some commands print error messages.
.Ib
.bI "\fB>>>O_D_VERBOSE<<<\fP"
.dX >>>O_D_VERBOSE<<<
.iX verbose
Switch verbose-mode on.  Only important messages appear below the status
line. This is the default.
.Ib
.\"}}}
.\"{{{  auto-save on/off
.dX autosave-mode
.bI "\fB>>>O_A_AUTO_SAVE<<<\fP"
.dX >>>O_A_AUTO_SAVE<<<
.iX >>>DEFAUTOSAVE<<<
Prompts for the auto save interval in minutes.  Origami will save your
files periodically in auto save mode, unless \fB>>>DEFAUTOSAVE<<<\fP is
used.  In this case the given macro will be executed instead.  Default
time is >>>NORM_ALARMTIME<<< minutes.  Minimum is >>>MIN_ALARMTIME<<<
minutes and maximum is >>>MAX_ALARMTIME<<< minutes.
.LP
If OCL variable \fB >>>M_O_VAR<<<\fP is set to a value \fIx\fP>0,
\fB>>>O_A_AUTO_SAVE<<<\fP will not prompt for a delay, but use \fIx\fP
seconds.  Very small values for \fIx\fP may be dangerous!
.LP
While Origami is waiting for a keyboard input, the save will be delayed!
.nB
You have checked in the previous version properly into RCS haven't you?
.Ib
.bI "\fB>>>O_D_AUTO_SAVE<<<\fP"
.dX >>>O_D_AUTO_SAVE<<<
.iX >>>OCL_ARG_V<<<
auto save is switched off.  The OCL-variable \fB>>>OCL_ARG_V<<<\fP is
set to the auto save interval in seconds, or 0, if auto save is already
switched off.
.Ib
.\"}}}
.\"{{{  no-parse on/off
.dX no-parse-mode
.bI "\fB>>>O_A_NOPARSE<<<\fP"
.dX >>>O_A_NOPARSE<<<
Origami does not parse for folds, whilst reading files (similar to the command
line option \fB\-n\fP).
.iX >>>OCL_ARG_V<<<
The OCL-variable \fB>>>OCL_ARG_V<<<\fP is set to \fB1\fP, if parsing was
activ, otherwise \fB0\fP.
.Ib
.bI "\fB>>>O_D_NOPARSE<<<\fP"
.dX >>>O_D_NOPARSE<<<
Origami parses folds during every command where a file is read.
.iX >>>OCL_ARG_V<<<
The OCL-variable \fB>>>OCL_ARG_V<<<\fP is set to \fB1\fP, if parsing was
activ, otherwise \fB0\fP.
.Ib
.\"}}}
.\"{{{  status-line
.iX "status line"
.bI "\fB>>>O_TITLE_HIDE<<<\fP"
.dX >>>O_TITLE_HIDE<<<
Displaying the status line is disabled.
.Ib
.bI "\fB>>>O_TITLE_SHOW<<<\fP"
.dX >>>O_TITLE_SHOW<<<
Displaying the status line is enabled.
.Ib
.\"}}}
.\"{{{  display
.iX display
.dX >>>O_DSP<<<
.iX >>>M_O_VAR<<<
.iX >>>OCL_ARG_V<<<
.bI "\fB>>>O_DSP<<<\fP"
Show a menu for selecting the text display mode.  You can choose:
.\"{{{  quit
.bI "\fBQuit\fP
Leave the menu loop.
.Ib
.\"}}}
.\"{{{  octal
.bI "\fBOctal\fP"
Use the octal format (`\fB\e\fP\fIxxx\fP') for characters, displayed as
numbers.
.Ib
.\"}}}
.\"{{{  decimal
.bI "\fBDecimal\fP"
Use the decimal format (`\fB\ed\fP\fIxxx\fP') for characters, displayed as
numbers.
.Ib
.\"}}}
.\"{{{  hex
.bI "\fBHex\fP"
Use the hexadecimal format (`\fB\e\fP\fIxx\fP') for characters, displayed as
numbers.
.Ib
.\"}}}
.\"{{{  mark
.bI "\fBMark\fP"
Display control characters with \fB>>>CTRL_MARK<<<\fP followed by one of
the coding characters \fB>>>CTRL_CHARS<<<\fP.
.Ib
.\"}}}
.\"{{{  invers
.bI "\fBInvers\fP"
Display control characters as invers coding character.
.Ib
.\"}}}
.\"{{{  number
.bI "\fBNumber\fP"
Display control characters as numbers (octal,decimal or hexadecimal).
.Ib
.\"}}}
.\"{{{  tab
.bI "\fBTab(\fP\fIn\fP\fB)\fP"
.iX tab
Prompts for the width of a tab.  \fIn\fP is the active size.  Negative values
and 0 will handle the tab as a normal control character.
.Ib
.\"}}}
.\"{{{  plain
.bI "\fBPlain\fP"
Display normal characters by temselves.
.Ib
.\"}}}
.\"{{{  8-Bit
.bI "\fB8-Bit\fP"
Display characters with set highbit as numbers (octal,decimal or hexadecimal).
.Ib
.\"}}}
.\"{{{  Full
.bI "\fBFull\fP"
Display all characters as numbers (octal,decimal or hexadecimal).

.nB
.iX area
.iX "display area"
the numbered display for normal characters is only used for the text
display window.  The display area and the status line are not concerned!
.Ib
.\"}}}

If OCL variable \fB>>>M_O_VAR<<<\fP is not null, the menu loop will be
ended after the first chosen item.
.LP
\fB>>>OCL_ARG_V<<<\fP is set to a coding of the current display mode:
.sI \fB64*\fP\fItab-width\fP+\fIbit-code\fP
with
.bI \fIbit-code\fP uses the bits for:
.TS
tab(|);
c l.
0 | inverse control characters
1 | marked control characters
2 | numbered 8-bit characters
3 | all characters numbered
4 | octal display
5 | decmal display
.TE
.Ib
.Ib
.\"}}}
.\"}}}
.\"{{{  no-operation
.bI "\fBno-operation\fP"
.dX no-operation
No operation.  This command can be used to explicitly disable keyboard
inputs.
.Ib
.\"}}}
.\"{{{  >>>O_BELL<<<
.bI "\fB>>>O_BELL<<<\fP"
.dX >>>O_BELL<<<
Activates the bell of your terminal.
.Ib
.\"}}}
.\"{{{  >>>O_BELL_VISIBLE<<<
.bI "\fB>>>O_BELL_VISIBLE<<<\fP"
.dX >>>O_BELL_VISIBLE<<<
Activates the `visible bell' of your terminal.
.Ib
.\"}}}
.\"{{{  >>>O_BREAK<<<
.bI "\fB>>>O_BREAK<<<\fP"
.dX >>>O_BREAK<<<
Aborts any operation.  There are several commands which can be aborted
by this key.  This operation can only be bound to a single key.  This
key will even stop a running function/macro, which may be useful to
interrupt an endless loop.  If you are anxious Origami might be doing
something wrong, this key returns you to a safe state.  Writing files
can also be interrupted.  \fB>>>O_BREAK<<<\fP can abort the reading of files for
the following commands:
.\"{{{  table of commands
.nI
.TS
tab(|);
l l.
Command:|condition:
\fB>>>O_ENTER_FOLD<<<\fP|a filed fold
\fB>>>O_EXIT_FOLD<<<\fP|a filed fold
\fBfile-fold\fP|unfiling a filed fold
\fB>>>O_INSERT_FILE<<<\fP
\fB>>>O_FILTER_BUFFER<<<\fP
\fB>>>O_PIPE_FROM_COMMAND<<<\fP
reading startup file|edit-file and stdin-pipe
.TE
.In
.\"}}}
.iX TDS
In this case, Origami simulates \fBeof\fP for ASCII-reading and
>>>O_BOT_OF_FOLD<<< for all open folds for TDS-reading.
.Ib
.\"}}}
.\"{{{  >>>O_CHANGE_MARK<<<
.bI "\fB>>>O_CHANGE_MARK<<<\fP"
.dX >>>O_CHANGE_MARK<<<
.iX mark
Prompts for the fold marks and replaces them by the new one.  Works like
\fB\-M\fP.
.Ib
.\"}}}
.\"}}}
.\"{{{  how to get out
.nH 2 "How to get out"
.\"{{{  >>>O_FINISH<<<
.bI "\fB>>>O_FINISH<<<\fP"
.dX >>>O_FINISH<<<
Exits entered folds as needed.  Saves the file if changed.  If the
buffer was the last buffer this command exits from Origami.
.nB
if Origami is in view mode, the file will not be saved.
.Ib
.\"}}}
.\"{{{  >>>O_QUIT<<<
.bI "\fB>>>O_QUIT<<<\fP"
.dX >>>O_QUIT<<<
If there are unsaved changes to the file in the current buffer, Origami
prompts for permission to close and quit the buffer anyway.
.Ib
.\"}}}
.\"}}}
.\"}}}
.\"{{{  Programming in OCL
.nH 1 "Programming in OCL"
.\"{{{  introduction to this chapter
.LP
.dX OCL
This chapter describes OCL (Origami control language) and gives some
examples to show how powerful it is.  OCL is a programming language
offering capabilities to use conditional statements, subroutines, loops,
variables and recursion.  It looks like LISP, but it is closer to an
assembly language.  The keybind program compiles human readable OCL
source code into a tokenized binary form which will be interpreted by
Origami.  Every binding of functions to keysequences must be done in this
binary file.  The functions described in the chapter explaining
keybindings are very simple OCL statements.
.\"}}}
.\"{{{  resource files
.nH 2 "Resource files"
.LP
.dX ".origami>>>RC_ENDING<<<"
.dX ".origami>>>MSG_ENDING<<<"
.dX ".origami>>>HELP_ENDING<<<"
.dX >>>ORIPATH<<<
.dX >>>ORIPATH_1<<<
.iX path
Origami needs some startup resource files to work.  They are named
\fB\&.origami\fP\fIending\fP.
.LP
Used endings are:
.\"{{{  >>>MSG_ENDING<<<
.bI "\fB>>>MSG_ENDING<<<\fP
This file contains the text strings displayed by Origami during an
editing session.  This file can be changed by editing it.
.wA
The length of the lines must not be changed!
.Ib
.\"}}}
.\"{{{  rc
.bI "\fB>>>RC_ENDING<<<\fP"
This file contains the binding of functions to keys, the functions, the
macros and all other stuff, explained below.  Use \fBkeybind\fP to
create new >>>RC_ENDING<<<-files.
.Ib
.\"}}}
.\"{{{  help
.bI "\fB>>>HELP_ENDING<<<\fP"
This file will be displayed, when calling the function \fB>>>O_HELP<<<\fP.  Any
text file is allowed.
.Ib
.\"}}}
.LP
The part \fBorigami\fP in the filename can be changed by setting the
command line option \fB\-k\fP\fIname\fP or using links to the binary.
The \fB.origami>>>MSG_ENDING<<<\fP-file must not be renamed, because Origami looks
for this file, if it cannot find the \fB>>>MSG_ENDING<<<\fP-file with the new name.
.LP
You can set the environment variable >>>ORIPATH<<< (or >>>ORIPATH_1<<<) to a
\fB:\fP or \fB^A\fP separated list of directories (Default is
\fB>>>ORIGAMI_RC_PATH_STRING<<<\fP).  Uppercase variables with \fB:\fP as delimiter
are usually used in \fBsh\fP and \fBcsh\fP, whereas \fB>>>RC_ENDING<<<\fP is able to
use real lists in variables (usually written in lowercase letters), which are
stored with \fB^A\fP as delimiter.  Origami looks for the resource files
in all these directories.  If commandline option \fB\-k\fP \fIname\fP is
used, and  \fIname\fP is an absolute path, starting from the root
directory, origami ignores the resource path to look for the bindings
file.
.\"}}}
.\"{{{  OCL syntax and semantics
.nH 2 "OCL syntax and semantics"
.\"{{{  general infos
.LP
This section describes all OCL elements.  It is assumed you are
familiar with other programming languages.  You will find OCL examples in a
later section.
.LP
.iX comment
Newlines and comments can be used anywhere in the text between syntactical
structures.  A comment starts with \fB;\fP and ends at end of line.
.LP
.iX variable
.iX integer
Though different machines have different wordlength, we use a 16 bit
coding for internal OCL integers.  Therefore the only machine
dependencies is the character coding (ASCII, ..).
.LP
Internal integers (addresses in macro code and constants in expressions)
are limited to \-32768..32767.
.\"}}}
.\"{{{  filed folds, include and libs
.nH 3 "Filed folds and libraries"
.LP
.iX libraries
.iX "Conditional compilation"
.\"{{{  filed fold or @>>>include_name<<<
.iX "filed fold"
.iX ">>>include_name<<<"
Using language \fBNone\fP, keybind will automatically include the
contents of filed folds when reading the source file.  Entering filed
fold is limited in depth to >>>OCL_FILE_DEPTH<<<.  Normally multiple includes of the
same file will not work, because redefinition of functions/macros is not
allowed.  To build a clean library, you can use the conditional
compilation explained below.
.LP
Files can be included without filed folds using:
.sI "\fB@>>>include_name<<<\fP \fIfilename\fP"
.Is
.dX @>>>include_name<<<
.\"}}}
.\"{{{  @>>>LIB<<<
.LP
Another way to include library files is:
.bI "\fB@>>>LIB<<<\fP \fIfilename\fP"
.iX libraries
.dX @>>>LIB<<<
.dX >>>KBDPATH<<<
.dX >>>KBDPATH_1<<<
.iX path
Keybind looks for the file \fIfilename\fP in several directories, given
in the keybind library path.  This path can be set by environment
variables \fB>>>KBDPATH<<<\fP or \fB>>>KBDPATH_1<<<\fP (Default is
\fB>>>KBD_PATH_STRING<<<\fP).  Like for resource files, this path is
a '\fB:\fP' or '\fB^A\fP' separated list of directories.  The first
directory, containing \fIfilename\fP, is used.  If \fIfilename\fP is
an absolute path, keybind ignores the library path.
.Ib
.\"}}}
.\"}}}
.\"{{{  naming the bindings
.nH 3 "Name and command line options"
.\"{{{  >>>BINDNAME<<<
.bI "\fB(>>>BINDNAME<<<\fP \fIname-of-binding\fP [ \fB(\fP \fIstring string\fP \fB)\fP ... ] \fB)\fP"
.dX >>>BINDNAME<<<
Defines a name for the binding which is displayed in the status line of
Origami.  If none is given, \fBOrigami\fP will be displayed.  Multiple
usage of this command is not allowed.  The name is limited to >>>BIND_NAME_LEN<<<
characters.
.LP
.iX >>>OCL_ARG_V<<<
.iX "Command line options"
The optional list of string pairs can be used to define command line
option aliases.  If '\fI( "alias "value )\fP' is defined,
\&'\fB\-O\fP\fIalias\fP' will be replaced by '\fB\-O\fP\fIvalue\fP' at
startup.  Alias name can use up to >>>BIND_NAME_LEN<<< characters.
The aliased string may not contain other aliases!
\fIname-of-binding\fP and the alias names will appear in the \fB\-h\fP
output for \fB\-O\fP, if the correct >>>RC_ENDING<<< file is read.
.nB
option aliases are stored in a fixed size field.  There is place for
>>>NO_OCL_CMD_OPTS<<<, using a >>>BIND_NAME_LEN<<< character name and a
>>>BIND_NAME_LEN<<< character value.  Shorter or longer values are allowed,
but the total maximum size cannot be changed!
.Ib
.\"}}}
.\"}}}
.\"{{{  bindings
.nH 3 "Binding commands to keys"
.LP
.\"{{{  >>>KEYDEF<<<
.dX >>>KEYDEF<<<
.\"{{{  op
.bI "\fB(>>>KEYDEF<<<\fP \fIoperation\fP \fIkeysequence\fP\fB)\fP"
The Origami operation named \fIoperation\fP is bound to the keyboard
input \fIkeysequence\fP.  The binding help will contain the entry:
.DS
\fBoperation keysequence\fP
.DE
.Ib
.\"}}}
.\"{{{  char
.hI
\fB(>>>KEYDEF<<< "\fP\fIsingle-char\fP \fIkeysequence\fP\fB)\fP
.tI
The normal character \fIsingle-char\fP is bound to the keyboard input
\fIkeysequence\fP.  The binding help will contain the entry:
.DS
\fBsingle-char keysequence\fP.
.DE
For example, this form of keybind can be used to map some keys of a
keypad to normal characters like + or * while using others as cursor
keys.
.eI
.\"}}}
.\"{{{  \-
.bI "\fB(>>>KEYDEF<<< \-\fP \fIkeysequence\fP\fB)\fP"
.iX >>>KNBM<<<
\fIkeysequence\fP triggers the \fBkey-not-bound\fP-handling.  Complain about
the unknown sequence, and if \fB>>>KNBM<<<\fP was used, start the
corresponding action.  This bindings will not be stored in the bindings list.
.Ib
.\"}}}
.\"}}}
.\"{{{  >>>KEYALIAS<<<
.bI "\fB(>>>KEYALIAS<<<\fP \fIname\fP \fIkeysequence\fP\fB)\fP"
.dX >>>KEYALIAS<<<
.dX $
The keyboard input \fIkeysequence\fP can be addressed as
\fB$\fP\fIname\fP in the following definitions.  Using \fB$\fP\fIname\fP
places the symbolic reference name in the binding help rather than the
key sequence itself.
.LP
Multiple \fB>>>KEYALIAS<<<\fP definitions for a single key \fIname\fP are
allowed.  In this case, every use of \fB$\fP\fIname\fP will generate as
many sequences, as \fB>>>KEYALIAS<<<\fP are defined.
.LP
The following >>>KEYALIAS<<< can be used without declaration:
.dX $esc
.DS
\fB$esc\fP = escape key = 27
.DE
.iX autoalias
Use \fBautoalias\fP to create your >>>KEYALIAS<<< declarations.
.Ib
.\"}}}
.\"{{{  description of operands
.\"{{{  name
.bI \fIname\fP
.dX name
\fIname\fP is a normal identifier not beginning with \fB@\fP.  The length
is limited to >>>NAME_LG<<<.
.Ib
.\"}}}
.\"{{{  keysequence
.bI \fIkeysequence\fP
.dX keysequence
\fIkeysequence\fP is a sequence of \fIkey\fP enclosed in parentheses.
\fIkeysequence\fPs are limited in length to >>>ALIAS_LG<<<.  \fIkey\fP specifies
a single key (or two keys, because \fBM\-"a\fP requires two keystrokes).
Valid declarations for \fIkey\fP are:
.\"{{{  single char
.bI \fB"\fP\fIx\fP
the single character \fIx\fP.  ' ' will be named \fBspace\fP in the
bindinglist.
.Ib
.\"}}}
.\"{{{  control
.bI \fBC\-\fP\fIX\fP
.dX C-
codes the non printable characters.  \fB@A\fP..\fBZ[\e]^_\fP codes the
characters 0..31.  \fB?\fP codes 127=delete-key.
.Ib
.\"}}}
.\"{{{  meta
.bI \fBM\-"\fP\fIx\fP
.dX M-
Meta-key (\fBESC\fP) followed by \fIx\fP (case sensitive)
.Ib
.\"}}}
.\"{{{  meta control
.bI \fBM\-C\-\fP\fIX\fP
.dX M-C-
META-control-\fIx\fP, that means Meta-key (\fBESC\fP) followed by
non-printable character \fBcontrol\fP-\fIx\fP.
.Ib
.\"}}}
.\"{{{  >>>KEYALIAS<<<
.bI \fB$\fP\fIname\fP
.iX >>>KEYALIAS<<<
.iX $
the key sequence defined by \fB( >>>KEYALIAS<<<\fP \fIname\fP \&.\&.\&.
\fB)\fP.  The bindinglist contains \fIname\fP.
.Ib
.\"}}}
.\"{{{  number
.bI \fB0x\fP\fIhexdigits\fP
.dX 0x
represents the given number
.Ib
.\"}}}
.\"{{{  *
.bI "\fB*\fP"
.dX *
Matches all characters, not explicitly bound in another statement.
.LP
.iX KNBM
.iX \-
The command `\fBunbind-remaining-keys\fP' has been deleted, but you can use
`\fB*\fP' in the sequence and `\fB\-\fP' as function can be used to replace it:
.\"{{{  example for unbind-remaining-keys
.DS
; old syntax
( unbind-remaining-keys ( mode-name ) )

; new syntax
( mode mode-name ( >>>KEYDEF<<< - ( * ) ) )
.DE
.\"}}}
The wildcards (`\fB*\fP') in the keysequences are evaluated, after all bindings
are done.  The following example shows the evaluation of \fB*\fP:
.\"{{{  complex example and explanation for scopes of *
.DS
\fB( >>>KEYALIAS<<<\fP \fIf1\fP \fB(\fP \fI$esc "[ "2 "4 "0\fP \fB) )\fP
\fB( >>>KEYALIAS<<<\fP \fIf2\fP \fB(\fP \fI$esc "[ "2 "4 "1\fP \fB) )\fP
\fB( >>>KEYALIAS<<<\fP \fIfunction-key-format\fP \fB(\fP \fI$esc "[ *\fP\v'.3m'\h'-.2m'\s-21\s0\h'.2m'\v'-.3m' \fI*\fP\v'.3m'\h'-.2m'\s-22\s0\h'.2m'\v'-.3m' \fI*\fP\v'.3m'\h'-.2m'\s-23\s0\h'.2m'\v'-.3m' \fI"z\fP \fB) )\fP
 ; \fB>>>KEYALIAS<<<\fP does not bind any key, so:
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-21-3\s0\h'.2m'\v'-.3m' are not evaluated, only stored

\fB( >>>KEYDEF<<<\fP \fIfun-1\fP \fB(\fP \fI$f1\fP \fB) )\fP
\fB( >>>KEYDEF<<<\fP \fIfun-2-1\fP \fB(\fP \fI$f2 "1\fP \fB) )\fP
\fB( >>>KEYDEF<<<\fP \fIfun-2-2\fP \fB(\fP \fI$f2 "2\fP \fB) )\fP

\fB( >>>KEYDEF<<<\fP \fI-\fP \fB(\fP \fI*\fP\v'.3m'\h'-.2m'\s-24\s0\h'.2m'\v'-.3m' \fB) )\fP
 ; only sequences starting with \fI$esc\fP are used, so:
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-24\s0\h'.2m'\v'-.3m' matches any character, but the escape character

\fB( >>>KEYDEF<<<\fP \fI-\fP \fB(\fP \fI$function-key-format *\fP\v'.3m'\h'-.2m'\s-25\s0\h'.2m'\v'-.3m' \fB) )\fP
 ; \fI$f1\fP and \fI$f2\fP are used for bindings, so:
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-21\s0\h'.2m'\v'-.3m' matches all but `2' here
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-22\s0\h'.2m'\v'-.3m' matches all but `4' here
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-23\s0\h'.2m'\v'-.3m' matches all but `0' and `1' here
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-25\s0\h'.2m'\v'-.3m' matches all but `1' and `2' here

\fB( >>>KEYDEF<<<\fP \fI-\fP \fB(\fP \fI$esc $function-key-format\fP \fB) )\fP
 ; there are no bindings for \fI$esc $esc\fP, so:
 ;  \fI*\fP\v'.3m'\h'-.2m'\s-21-3\s0\h'.2m'\v'-.3m' match any character here
.DE
.\"}}}
.Ib
.\"}}}
.Ib
.\"}}}
.\"}}}
.\"{{{  >>>OVER_PRE<<<
.bI "\fB(>>>OVER_PRE<<< (\fP \fIprefix\fP ... \fB))\fP"
.dX >>>OVER_PRE<<<
.dX prefix
Binding functions named \fIprefix????\fP to keysequences, uses \fI???\fP as
name instead of \fIprefix???\fP in the binding help.
.Ib
.\"}}}
.\"}}}
.\"{{{  marks
.nH 3 "Other marks for folds"
.iX mark
.\"{{{  >>>DEFMARK<<<
.bI "\fB(>>>DEFMARK<<<\fP \fIname\fP \fB(\fP \fImark1\fP \fImark2\fP \fImark3\fP \fImark4\fP \fB))\fP"
.dX >>>DEFMARK<<<
This option places the definition of alternative fold marks in the
>>>RC_ENDING<<<file, so that Origami can switch to these marks when invoked with
command line option \fB\-m\fP\fIname\fP.  \fIname\fP will be cut, if the
length is \(>= >>>FOLD_PATTERN_LEN<<<.  The format for \fImark?\fP is:
.DS
\fB(\fP \fIsingle-char\fP \fIsingle-char\fP \fIsingle-char\fP \fB)\fP
.DE
where \fIsingle-char\fP is a \fB"\fP\fIx\fP definition like in
\fB(>>>KEYDEF<<<\fP ...  \fB)\fP.  The meanings of \fImark1\fP ...
\fImark4\fP are:
.\"{{{  table of marks
.nI
.ne 7
.TS
tab(|);
l l c.
item:|used for:|default:
\fImark1\fP|begin of fold|\fB{\&{\&{\fP
\fImark2\fP|closed fold|\fB\&.\&.\&.\fP
\fImark3\fP|name of filed fold|\fB:\&:\&:\fP
|attributes of fold
\fImark4\fP|end of fold|\fB}\&}\&}\fP
.TE
.In
.\"}}}
.Ib
.\"}}}
.\"}}}
.\"{{{  Subroutines and macros
.nH 3 "Functions and macros"
.iX macro
.iX function
.\"{{{  >>>DEFOP<<<
.bI "\fB(>>>DEFOP<<<\fP \fIname\fP \fB(\fP\fIstatement\fP ... \fB))\fP"
.dX >>>DEFOP<<<
.dX macro
A macro \fIname\fP will be defined.  Recursive invocations will be
detected and handled inside the macro code.  The macrocall will be
replaced by inline code.  If the OCL-assembler code for this macro has a
length 1, this macro can also be bound to keys.  Longer macros can only
be used inside other macro definitions.
.Ib
.\"}}}
.\"{{{  >>>DEFMACRO<<<
.bI "\fB(>>>DEFMACRO<<<\fP [ \fB(\fP \fIvariable-name\fP ... \fB)\fP ] \fIname\fP \fB(\fP\fIstatement\fP ... \fB))\fP"
.dX >>>DEFMACRO<<<
.dX function
.iX >>>UNDECLARE<<<
.iX variable
The operations in \fB(\fP\fIstatement\fP ...  \fB)\fP are written to the
\&.origami>>>RC_ENDING<<< file so that Origami can initialize a fix-macro-buffer with
the function \fIname\fP.  Recursion is allowed.  In the OCL text
following this definition, you can use \fIname\fP as function call or
for key bindings.  You cannot redefine the function (unless you use
\fB>>>UNDECLARE<<<\fP).
.LP
The optional list of variable-names can be used to specify integer arguments,
which will be set from the caller.  Recursion is also supported (the values are
saved on a stack).  Inside \fIstatement\fP, the names given in "\fB(\fP
\fIvariable-name\fP ...  \fB)\fP" overwrite variables, defined using
"\fB(>>>DEFVAR<<<\fP ...  \fB)\fP".  After the definition of \fIstatement\fP,
the variables cannot be accessed anymore.
.Ib
.\"}}}
.\"{{{  >>>DEFASM<<<
.bI "\fB(>>>DEFASM<<<\fP \fIname\fP \fB(\fP\fIassembler-statement\fP ... \fB))\fP"
.dX >>>DEFASM<<<
.iX function
.iX variable
.iX >>>FORWARD<<<
Like \fB>>>DEFMACRO<<<\fP, but the code is given as a list of assembler
statements.  An argument list cannot be given here.  If you need the
assembler function to be called with arguments, use '\fB(>>>FORWARD<<<\fP
\fIargument-list name\fP \fB)\fP' in front of the \fB>>>DEFASM<<<\fP
statement.  OCL assembler syntax is explained in the appendix.
.Ib
.\"}}}
.\"{{{  >>>INITMACRO<<<
.bI "\fB(>>>INITMACRO<<<\fP \fIname\fP \fB(\fP\fIstatement\fP ... \fB))\fP"
.dX >>>INITMACRO<<<
Like \fB>>>DEFOP<<<\fP.  In addition to this, the code is written to the
>>>RC_ENDING<<<-file to enable the use of \fIname\fP in \fB(>>>KEYDEF<<<\fP \&.\&.\&.
\fB)\fP statements.
.wA
using \fB>>>O_DEF_FIX<<< x\fP has no effect on functions defined
with \fB>>>INITMACRO<<<\fP, when calling them by their name inside a
function/macro.  If you want to use such an effect you must use
\fB>>>O_CALL_FIX<<< x\fP in the calling function/macro.
.Ib
.\"}}}
.\"{{{  >>>UNDECLARE<<<
.bI "\fB(>>>UNDECLARE<<< (\fP \fIname\fP ... \fB))\fP"
.dX >>>UNDECLARE<<<
.iX function
.iX macro
.iX variable
Remove functions, macros and variables (explained below) from the symbol
table.  The objects still exist, but the textually following OCL-source
cannot access them.  It can be used, to hide local variables/macros.
The names can be used again for other purposes without affecting the
earlier usage.  Forwarded functions have to be declared, before
undeclaring them.
.LP
You can also undeclare the standard Origami functions (like
\fB>>>O_ENTER_FOLD<<<\fP).  This can be used to replace the default functions by
your own:
.eX >>>DEFOP<<<
.eX >>>UNDECLARE<<<
.eX >>>DEFMACRO<<<
.DS
( >>>DEFOP<<< >>>O_ENTER_FOLD<<<-orig ( >>>O_ENTER_FOLD<<< ) )
( >>>UNDECLARE<<< ( >>>O_ENTER_FOLD<<< ) )
( >>>DEFMACRO<<< >>>O_ENTER_FOLD<<<
   \&.\&..  your code, using >>>O_ENTER_FOLD<<<-orig
)
( >>>UNDECLARE<<< ( >>>O_ENTER_FOLD<<<-orig ) )
.DE
.wA
using \fB>>>UNDECLARE<<<\fP is the only way for redefining things in OCL, but
this redefiniton has no effect on definitions, made before!
.Ib
.\"}}}
.\"{{{  usermacro
.bI "\fB(>>>DEFMYFIX<<<\fP \fInumber\fP\fB)\fP"
.dX usermacros
.iX function
This command must be used before any \fB>>>DEFMACRO<<<\fP/\fB>>>INITMACRO<<<\fP
statement.  The fix-macro-buffers 1..\fInumber\fP are not used by OCL to
store functions.  They can be used for \fB>>>O_DEF_FIX<<<\fP.
.Ib
.\"}}}
.\"{{{  which macro places are used
.nB
Using the commands \fB>>>DEFMACRO<<<\fP and \fB>>>INITMACRO<<<\fP uses the
fix-macro-buffers 1,2,.. (or \fIx\fP,\fIx\fP+1,.., if you have used
\fB(>>>DEFMYFIX<<<\fP \fIx\fP\fB)\fP).
.\"}}}
.\"{{{  >>>DEMAND<<<
.bI "\fB( >>>DEMAND<<< (\fP \fIocl-source\fP \fB) )\fP"
.dX >>>DEMAND<<<
.iX >>>DEFAB<<<
All functions, defined in \fIocl-source\fP using \fB>>>DEFMACRO<<<\fP or
\fB>>>DEFASM<<<\fP are marked as demand-loading.  Origami doesn't read
them at startup but at first usage.  \fB>>>DEMAND<<<\fP statements can be
nested.  The \fB>>>DEFAB<<<\fP or functions called by \fB>>>DEFAB<<<\fP
may not be marked as demand-loading.
.Ib
.\"}}}
.\"{{{  >>>DEMAND<<< >>>NOT<<<
.bI "\fB( >>>DEMAND<<< >>>NOT<<<(\fP \fIocl-source\fP \fB) )\fP"
.dX ">>>DEMAND<<< >>>NOT<<<"
.iX >>>DEMAND<<<
.iX >>>NOT<<<
All functions, defined in \fIocl-source\fP using \fB>>>DEFMACRO<<<\fP or
\fB>>>DEFASM<<<\fP are not marked as demand-loading.  Origami reads them
at startup.  Inside \fIocl-source\fP, no other \fB>>>DEMAND<<<\fP or
\fB>>>DEMAND<<< >>>NOT<<<\fP statements is allowed.
.Ib
.\"}}}
.\"{{{  >>>START_LIST<<<
.bI "\fB(>>>START_LIST<<<)\fP
.dX >>>START_LIST<<<
Origami starts editing the list of edited files, even if command line
option \fB\-A\fP is not active or number of files is 1.
.Ib
.\"}}}
.\"{{{  no-statusline
.bI "\fB(>>>O_TITLE_HIDE<<<)\fP"
.iX "status line"
.iX ">>>O_TITLE_SHOW<<<"
.dX ">>>O_TITLE_HIDE<<<"
Origami starts without displaying the status line.  The Origami commands
\fB>>>O_TITLE_SHOW<<<\fP and \fB>>>O_TITLE_HIDE<<<\fP can be used during the
editing to override this default.
.Ib
.\"}}}
.\"{{{  >>>FORWARD<<<
.bI "\fB(>>>FORWARD<<<\fP [ \fB(\fP \fIvariable-name\fP ... \fB)\fP ] \fIname\fP \fB)\fP"
.dX >>>FORWARD<<<
.iX variable
\fIname\fP is declared as a name for a function defined with \fB>>>INITMACRO<<<\fP
or \fB>>>DEFMACRO<<<\fP.  In the following statements, \fIname\fP can be used as
function call even before its actual definition with \fB(>>>DEFMACRO<<<\fP
\fIname\fP ...  \fB)\fP.
.Ib
.\"}}}
.\"{{{  >>>B_CHG_MAC<<<
.bI "\fB(>>>B_CHG_MAC<<<\fP \fIname\fP\fB)\fP"
.dX >>>B_CHG_MAC<<<
The function named \fIname\fP is called every time, you switch to
another buffer.
.Ib
.\"}}}
.\"{{{  automacro
.bI "\fB(>>>DEFAUTO<<<\fP \fIname\fP\fB)\fP"
.dX >>>DEFAUTO<<<
The function named \fIname\fP is called every time a new file is edited,
either explicitly or by entering or exiting a filed fold.
.Ib
.\"}}}
.\"{{{  abortmacro
.bI "\fB(>>>DEFAB<<<\fP \fIname\fP\fB)\fP"
.dX >>>DEFAB<<<
.iX >>>O_BREAK<<<
The function named \fIname\fP is executed each time the abort key is
pressed.
.Ib
.\"}}}
.\"{{{  view
.bI "\fB(>>>VMAC<<<\fP \fIname\fP\fB)\fP"
.iX view-mode
.dX >>>VMAC<<<
.iX >>>OCL_ARG_V<<<
The function named \fIname\fP is executed at each attempt to change the
file in view mode.  \fB>>>OCL_ARG_V<<<\fP is set to the ignored OCL
command.
.Ib
.\"}}}
.\"{{{  promptinmacro
.bI "\fB(>>>PRO_IN<<<\fP \fIname\fP\fB)\fP"
.dX >>>PRO_IN<<<
The function named \fIname\fP is executed each time prompt mode is
entered (except the OCL commands \fB>>>PROMPT<<<\fP and \fB>>>PROMPT_COUNTER<<<\fP).
The repeat argument function reads its arguments in prompt mode.  The
function and all called functions/macros may only use the following
OCL-elements (some of them are explained in the following chapters):
.\"{{{  tables of allowed elements
.KS
.nI
.TS
tab(|);
l l l.
.\"{{{  controls
.T&
l
l l.
controls:
 \fB>>>IF<<<\fP-\fB>>>fi_name<<<\fP|\fB>>>IF<<<\fP-\fB>>>ELSE<<<\fP-\fB>>>fi_name<<<\fP
 \fB>>>CASE<<<\fP-\fB>>>DEFAULT<<<\fP-\fB>>>ESAC<<<\fP|\fB>>>LOC<<<\fP
 \fB>>>WHILE<<<\fP|\fB>>>DO<<<\fP-\fB>>>WHILE<<<\fP
.\"}}}

.\"{{{  commands
.T&
l
l l.
commands:
 \fB>>>EXIT<<<\fP|\fB>>>MES_EXIT<<<\fP
 \fB>>>SET_COUNTER<<<\fP|modes from \fB(>>>MULTIKBD<<<\fP \&.\&.\&. \fB)\fP
 \fB>>>HISTORY<<<\fP|\fB>>>HISTORY_GET<<<\fP
 \fB>>>O_UNCHANGE<<<\fP
.\"}}}

.\"{{{  booleans
.T&
l s
l l
l s
l l.
booleans:
 \fB>>>NOT<<<\fP
 \fB>>>AND<<<\fP|\fB>>>OR<<<\fP
 \fB<\fP \fB<>\fP \fB>\fP|\fB<=\fP \fB=\fP \fB>=\fP
 \fB>>>TEST_ECHO<<<\fP|\fB>>>TEST_CHANGED<<<\fP
 \fB>>>LASTMES<<<\fP|\fB>>>TEST_VIEW<<<\fP
 \fB>>>TEST_AUTO<<<\fP|\fB>>>EDITING<<<\fP
 \fB>>>TEST_GEN_FOLD<<<\fP|\fB>>>TEST_LANG<<<\fP
 \fB>>>TEST_OVER<<<\fP|\fB>>>TEST_BEGIN_FOLD<<<\fP
 \fB>>>TEST_FOLD_LINE<<<\fP|\fB>>>TEST_END_FOLD<<<\fP
 \fB>>>TEST_FILED<<<\fP|\fB>>>TEST_TEXT<<<\fP
 \fB>>>TEST_HASH<<<\fP
.\"}}}

.\"{{{  terms
.T&
l
l l l.
terms:
 \fB>>>SET_ENTER<<<\fP|\fB>>>SET_S_ENTER<<<\fP|\fB>>>FILETYPE<<<\fP
 numbers|characters|
 \fB+\fP|\fB\-\fP|\fB*\fP
 \fB>>>MOD<<<\fP|\fB>>>DIV<<<\fP
.\"}}}
.TE
.In
.KE
.\"}}}
.wA
keybind does not check if you only use the allowed commands!  Only the
valid commands in called functions/macros will be executed.  All other
commands will be ignored, but do not rely on this feature!
.Ib
.\"}}}
.\"{{{  promptoutmacro
.bI "\fB(>>>PRO_OUT<<<\fP \fIname\fP\fB)\fP"
.dX >>>PRO_OUT<<<
The function named \fIname\fP is executed each time prompt mode is finished
(except the OCL commands \fB>>>PROMPT<<<\fP and \fB>>>PROMPT_COUNTER<<<\fP).  The
command restrictions for the function are the same as in
\fB>>>PRO_IN<<<\fP.
.Ib
.\"}}}
.\"{{{  keynotbound
.bI "\fB(>>>KNBM<<<\fP \fIname\fP\fB)\fP"
.dX >>>KNBM<<<
The function named \fIname\fP is executed each time an illegal keysequence
was entered.  The command restrictions for the function are the same as in
\fB>>>PRO_IN<<<\fP.
.Ib
.\"}}}
.\"{{{  >>>DEFAUTOSAVE<<<
.bI "\fB(>>>DEFAUTOSAVE<<<\fP \fIname\fP\fB)\fP"
.dX >>>DEFAUTOSAVE<<<
.iX autosave-mode
If \fB>>>DEFAUTOSAVE<<<\fP is given, the execution of this macro
replaces the saving of all changed files.
.Ib
.\"}}}
.\"{{{  >>>DEFQUIT<<<
.bI "\fB(>>>DEFQUIT<<<\fP \fIname\fP\fB)\fP"
.dX >>>DEFQUIT<<<
If set, Origami tries to execute \fIname\fP, if Origami got the signal SIGQUIT.
.Ib
.\"}}}
.\"{{{  >>>DEFU1<<<
.bI "\fB(>>>DEFU1<<<\fP \fIname\fP\fB)\fP"
.dX >>>DEFU1<<<
If set, Origami tries to execute \fIname\fP, if Origami got the signal SIGUSR1.
.Ib
.\"}}}
.\"{{{  >>>DEFU2<<<
.bI "\fB(>>>DEFU2<<<\fP \fIname\fP\fB)\fP"
.dX >>>DEFU2<<<
If set, Origami tries to execute \fIname\fP, if Origami got the signal SIGUSR2.
.Ib
.\"}}}
.\"}}}
.\"{{{  control structures
.nH 3 "Control structures"
.LP
A \fIstatement\fP can be one of the following control structures or
functions:
.\"{{{  >>>WHILE<<<
.bI "\fB>>>WHILE<<<\fP \fIcondition\fP \fB(\fP\fIstatement\fP ... \fB)\fP"
.dX >>>WHILE<<<
Prechecked loop, \fIstatement\fP ...  is repeated while the condition is
true.
.Ib
.\"}}}
.\"{{{  >>>DO<<< >>>WHILE<<<
.bI "\fB>>>DO<<< (\fP\fIstatement\fP ... \fB) >>>WHILE<<<\fP \fIcondition\fP"
.dX >>>DO<<<
.dX >>>WHILE<<<
Postchecked loop, \fIstatement\fP ...  is repeated until the condition
is false.
.Ib
.\"}}}
.\"{{{  >>>IF<<< >>>ELSE<<< >>>fi_name<<<
.bI "\fB>>>IF<<<\fP \fIcondition\fP \fB(\fP\fIstatement\fP ... \fB)\fP [ \fB>>>ELSE<<< (\fP\fIstatement\fP ... \fB)\fP ] \fB>>>fi_name<<<\fP"
.dX >>>IF<<<
.dX >>>ELSE<<<
.dX >>>fi_name<<<
Conditional statement.  If condition is true, the first statement list
is executed.  If condition is false, the second statement list, if
given, is executed.
.Ib
.\"}}}
.\"{{{  >>>CASE<<< >>>ESAC<<<
.bI "\fB>>>CASE<<< (\fP\fIcondition\fP \fB(\fP\fIstatement\fP ... \fB))\fP ... [ \fB>>>DEFAULT<<< (\fP\fIstatement\fP ... \fB)\fP ] \fB>>>ESAC<<<\fP"
.dX >>>CASE<<<
.dX >>>ESAC<<<
.dX >>>DEFAULT<<<
Conditional statement.  The block of statements following the first
conditional expression evaluating to TRUE is executed.  If none of the
conditions is true, the given default statements are executed.
.Ib
.\"}}}
.\"{{{  >>>REPEAT<<<
.bI "\fB>>>REPEAT<<<\fP \fIterm\fP \fB(\fP\fIstatement\fP ... \fB)\fP"
.dX >>>REPEAT<<<
\fB(\fP\fIstatement\fP ... \fB)\fP is repeated \fIterm\fP times.
.wA
old versions of keybind stored the called statements \fIterm\fP times.
\fIterm\fP had to be a constant!  This new version of keybind generates
code, which uses an internal OCL-variable to count the loops.  The
number of repeats need not be a constant!  The repeated statement list is
\fB>>>NOT<<<\fP called via a subroutine call, so \fB>>>RETURN<<<\fP will
leave the current function/macro, not only the \fB>>>REPEAT<<<\fP!
.Ib
.\"}}}
.\"{{{  >>>PROMPT<<<
.bI "\fB>>>PROMPT<<<\fP \fImessage-string\fP"
.dX >>>PROMPT<<<
.dX message-string
Displays \fImessage-string\fP below the status line and waits for
\fB>>>O_RETURN<<<\fP.  If Origami is in define-macro-mode, the
\fB>>>O_RETURN<<<\fP will not be stored!  \fImessage-string\fP can be:
.\"{{{  decription of message-string
.sI "\fIstring\fP"
.Is
.bI "\fB(\fP\fImessage-string-item\fP ... \fB)\fP"
This list of \fImessage-string-item\fPs can contain more complicated entries.
They are:
.\"{{{  string
.sI "\fIstring\fP"
.Is
.\"}}}
.\"{{{  var
.bI "\fB>>>COUNTER<<<\fP \fIname\fP"
This will be replaced by the ASCII-representation of the value of
OCL-variable \fIname\fP.
.Ib
.\"}}}
.\"{{{  number
.bI "\fInumber\fP"
This will be replaced by the ASCII-representation of \fInumber\fP.
.Ib
.\"}}}
.\"{{{  history
.bI "\fB>>>HISTORY<<<\fP \fIhistory-name\fP"
.iX >>>HISTORY<<<
.iX history-name
.iX >>>HISTORY_GET<<<
use the text of "\fB>>>HISTORY_GET<<<\fP \fIhistory-name\fP \fB0\fP".
\fB>>>HISTORY_GET<<<\fP is explained below.
.Ib
.\"}}}
.\"{{{  ori-message
.bI "\fIorigami-message\fP"
where \fIorigami-message\fP can be one of the message names declared in
the Origami sources, file >>>MSG_ENDING<<<.  Empty strings will be substituted for %s
formatting arguments.  Random values will be used to replace all other
formatting arguments.
.Ib
.\"}}}
.Ib
.wA
Origami cuts long \fImessage-string\fPs after >>>LINELEN<<< characters.
.\"}}}
.LP
Origami displays \fImessage-string\fP and waits until you type a
\fB>>>O_RETURN<<<\fP on your keyboard.  The given input will
\fB>>>NOT<<<\fP be interpreted.  Thus, typing the keysequence of a function
not execute it.
.pM \fB>>>PROMPT<<<\fP
.Ib
.\"}}}
.\"{{{  >>>MESSAGE<<<
.bI "\fB>>>MESSAGE<<<\fP \fImessage-string\fP"
.dX >>>MESSAGE<<<
.iX message-string
Like \fB>>>PROMPT<<<\fP, but does not wait for input.
.LP
.iX >>>M_O_VAR<<<
If OCL variable \fB>>>M_O_VAR<<<\fP is not 0, the message will only be printed,
if command line option \fB\-V\fP is active.
.Ib
.\"}}}
.\"{{{  exits
.bI "\fB>>>EXIT<<<\fP"
.dX >>>EXIT<<<
All running functions are aborted.
.Ib
.bI "\fB>>>MES_EXIT<<<\fP \fImessage-string\fP"
.iX message-string
.dX >>>MES_EXIT<<<
Same as >>>EXIT<<<.  \fImessage-string\fP is displayed under the status line.
.Ib
.\"}}}
.\"{{{  >>>RETURN<<<
.bI "\fB>>>RETURN<<<\fP"
.dX >>>RETURN<<<
The currently executed function/macro ends and the caller (keyboard,
function or macro) resumes execution.
.Ib
.\"}}}
.\"{{{  >>>LOC<<<
.bI "\fB>>>LOC<<< (\fP\fIname\fP ... \fB) (\fP\fIstatement\fP ... \fB)\fP"
.dX >>>LOC<<<
The values of the variables \fIname\fP ...  are saved during the
execution of \fB(\fP\fIstatement\fP ...  \fB)\fP and restored to their
original values afterwards.
.nB
\fB(\fP\fIstatement\fP ...  \fB)\fP is executed as a subroutine, so that
using \fB>>>RETURN<<<\fP inside will only leave this block and not
the current function/macro.  It is allowed to use a empty variable-list
inside the \fB>>>LOC<<<\fP-statement.  In this case, the statement can be
used, to use \fB>>>RETURN<<<\fP as a kind of break!
.Ib
.\"}}}
.\"{{{  >>>SHOW_CURSOR<<<
.bI "\fB>>>SHOW_CURSOR<<<\fP \fIterm\fP"
.dX >>>SHOW_CURSOR<<<
The text cursor is displayed and Origami sleeps for \fIterm\fP/10
seconds.  \fIterm\fP is explained in the following chapter
\fBVariables\fP.
.Ib
.\"}}}
.\"{{{  origami-commands
.bI "\fIorigami-command\fP"
All Origami commands you can use from the keyboard can also be used by
their names.  \fB>>>O_BREAK<<<\fP stops the function/macro execution and calls
the >>>DEFAB<<<, if it is defined.
.Ib
.\"}}}
.\"{{{  macros and functions
.bI "\fImacro-name\fP or \fIfunction-name\fP"
All macros defined with \fB>>>DEFOP<<<\fP and all functions defined with
\fB>>>INITMACRO<<<\fP can be used by their name.  Functions defined with
\fB>>>DEFMACRO<<<\fP or \fB>>>FORWARD<<<\fP can be used, if they do not need any
arguments.
.Ib
.\"}}}
.\"{{{  function( ... )
.bI "\fIfunction-name\fP \fB(\fP \fIterm\fP ...\fB)\fP"
.iX variable
.iX term
All functions defined with \fB>>>DEFMACRO<<<\fP or \fB>>>FORWARD<<<\fP can be
used, if they need some arguments. The number of terms must fit the
definition of \fIfunction-name\fP. \fIterm\fPs are explained below in
chapter \fBVariables\fP.
.Ib
.\"}}}
.\"{{{  hooks by their names
.bI \fIhooks\fP
If the corresponding hooks are already defined, you can use these names
to call them (otherwise the statement has \fBno\fP effect):
.sI \fB>>>B_CHG_MAC<<<\fP
.Is
.iX >>>B_CHG_MAC<<<
.sI \fB>>>DEFAUTO<<<\fP
.Is
.iX >>>DEFAUTO<<<
.sI \fB>>>DEFAB<<<\fP
.Is
.iX >>>DEFAB<<<
.sI \fB>>>VMAC<<<\fP
.Is
.iX >>>VMAC<<<
.sI \fB>>>PRO_IN<<<\fP
.Is
.iX >>>PRO_IN<<<
.sI \fB>>>PRO_OUT<<<\fP
.Is
.iX >>>PRO_OUT<<<
.sI \fB>>>KNBM<<<\fP
.Is
.iX >>>KNBM<<<
.sI \fB>>>DEFAUTOSAVE<<<\fP
.Is
.iX >>>DEFAUTOSAVE<<<
.sI \fB>>>DEFQUIT<<<\fP
.Is
.iX >>>DEFQUIT<<<
.sI \fB>>>DEFU1<<<\fP
.Is
.iX >>>DEFU1<<<
.sI \fB>>>DEFU2<<<\fP
.Is
.iX >>>DEFU2<<<
.Ib
.\"}}}
.\"{{{  >>>INSERT_ASCII<<<
.bI "\fB>>>INSERT_ASCII<<<\fP \fIorigami-message\fP"
.dX >>>INSERT_ASCII<<<
.iX origami-message
Put the string for \fIorigami-message\fP in the text,
where \fIorigami-message\fP can be one of the message names declared in
the Origami sources, file >>>MSG_ENDING<<<.
.Ib
.\"}}}
.\"{{{  strings
.bI "\fIstrings\fP"
Normal text can be used.  The syntax is:
.bI "\fB""\fP\fItext\fP"
\fItext\fP can be a any string not containing <space>, \fB"\fP or \fB)\fP.
.Ib
.sI "\fB""\fP<space> to use <space>"
.Is
.sI "\fB"")\fP to use \fB)\fP"
.Is
.sI "\fB""""\fP to use \fB""\fP"
.Is
.wA
if you use Origami to edit an OCL file, \fB"\fP<space> should not be the
last statement of a line because Origami deletes all spaces at end of
line.  The problem can be circumvented by appending a comment to the
line.
.Ib
.\"}}}
.\"}}}
.\"{{{  variables
.\"{{{  types
.nH 3 "Variables Types"
.dX variable
.LP
OCL knows 3 types of variables:
.\"{{{  global ints
.nH 4 "global integer variables"
.iX >>>DEFVAR<<<
.LP
These variables have to be declared with:
.sI "\fB(>>>DEFVAR<<< (\fP\fIvariablename\fP .. \fB))\fP"
.Is
.dX >>>DEFVAR<<<
.LP
The following global integer variables are always predefined, their values
are set by Origami automatically:
.\"{{{  screen data
.bI "\fB>>>SCR_H<<<\fP, \fB>>>SCR_W<<<\fP, \fB>>>CURSOR_LEVEL<<<\fP, \fB>>>SCR_W_O<<<\fP, \fB>>>SCR_H_O<<<\fP"
.dX >>>SCR_H<<<
.dX >>>SCR_H_O<<<
.dX >>>SCR_W<<<
.dX >>>SCR_W_O<<<
.dX >>>CURSOR_LEVEL<<<
The three OCL variables \fB>>>SCR_H<<<\fP, \fB>>>SCR_W<<<\fP and \fB>>>CURSOR_LEVEL<<<\fP are set
to size of the text editing area of the current buffer on the screen and
the number of the line, the cursor is in (top of buffer buffer window =
1).  The variables \fB>>>SCR_W_O<<<\fP and \fB>>>SCR_H_O<<<\fP contain the offsets of
the current buffer window on the screen.
.Ib
.\"}}}
.\"{{{  buffer data
.bI "\fB>>>C_B_VAR<<<\fP, \fB>>>C_BI_VAR<<<\fP, \fB>>>U_B_VAR<<<\fP, \fB>>>M_B_VAR<<<\fP"
.iX buffer
.dX >>>C_B_VAR<<<
.dX >>>C_BI_VAR<<<
.dX >>>U_B_VAR<<<
.dX >>>M_B_VAR<<<
The variable \fB>>>U_B_VAR<<<\fP shows the number of used buffers.
.br
\fB>>>C_B_VAR<<<\fP shows the number of the active (current) buffer.  This
number is not a fixed name, but represents the position of this buffer
in the internal list of used buffers.  It might change, if new buffers
are opened or existing buffers are deleted!
.br
The OCL-variable \fB>>>C_BI_VAR<<<\fP contains a number, representing the
creation time of the buffer. During the editing session, this will not
change for a buffer.
.br
\fB>>>M_B_VAR<<<\fP contains the number of buffers, which are used to edit the
file in the current buffer.
.Ib
.\"}}}
.\"{{{  ocl-arguments
.bI "\fB>>>OCL_ARG_V<<<\fP"
.dX >>>OCL_ARG_V<<<
.iX >>>O_SHELL_COMMAND<<<
.iX >>>O_SHELL<<<
.iX >>>O_FILTER_BUFFER<<<
.iX >>>O_PIPE_TO_COMMAND<<<
.iX >>>O_PIPE_FROM_COMMAND<<<
.iX >>>O_FILE_C<<<
.iX >>>O_D_AUTO_SAVE<<<
.iX >>>O_D_TIME<<<
.iX view-mode
The OCL variable \fB>>>OCL_ARG_V<<<\fP can be set by using the command
line option \fB\-O\fP\fIvalue\fP.  This variable is also used, to store
the exit status for \fB>>>O_SHELL_COMMAND<<<\fP, \fB>>>O_SHELL<<<\fP,
\fB>>>O_FILTER_BUFFER<<<\fP, \fB>>>O_PIPE_TO_COMMAND<<<\fP and
\fB>>>O_PIPE_FROM_COMMAND<<<\fP.
\fB>>>O_FILE_C<<<\fP stores the number of added characters in it.
\fB>>>O_D_TIME<<<\fP stores the old time mode in it.
\fB>>>O_D_AUTO_SAVE<<<\fP returns information about the old auto save
interval in this variable. \fB>>>OCL_ARG_V<<<\fP is set to the OCL
command token, which cannot be executed while view mode is active.
.Ib
.\"}}}
.\"{{{  >>>M_O_VAR<<<
.bI "\fB>>>M_O_VAR<<<\fP"
.dX >>>M_O_VAR<<<
.iX >>>O_OPEN_BUFFER<<<
.iX >>>O_OPEN_LIST_BUFFER<<<
.iX >>>O_OPEN_W_BUFFER<<<
.iX >>>O_OPEN_LIST_W_BUFFER<<<
.iX >>>O_CREATE_FOLD<<<
.iX >>>O_HELP<<<
.iX >>>MESSAGE<<<
.iX >>>O_REFRESH<<<
.iX >>>O_A_AUTO_SAVE<<<
.iX >>>O_DSP<<<
\fB>>>M_O_VAR<<<\fP changes the semantics of Origami/OCL-functions:
.TS
tab(|);
l l.
command|modification/effect
\fB>>>O_CREATE_FOLD<<<\fP|switch on highlighting mode
\fB>>>O_OPEN_BUFFER<<<\fP|place/file
\fB>>>O_OPEN_LIST_BUFFER<<<\fP|place/file
\fB>>>O_OPEN_W_BUFFER<<<\fP|place/file
\fB>>>O_OPEN_LIST_W_BUFFER<<<\fP|place/file
\fB>>>O_HELP<<<\fP|show \fB@>>>STARTREF_NO<<<\fP help
\fB>>>MESSAGE<<<\fP|print only in verbose mode
\fB>>>O_REFRESH<<<\fP|screen invalid
\fB>>>O_A_AUTO_SAVE<<<\fP|delay in seconds
\fB>>>O_DSP<<<\fP|do not stay in menu
.TE
.Ib
.\"}}}
.\"{{{  >>>K_C_VAR<<<
.bI "\fB>>>K_C_VAR<<<\fP"
.dX >>>K_C_VAR<<<
\fB>>>K_C_VAR<<<\fP contains the number of keyboard inputs, Origami read.
.Ib
.\"}}}
.\"{{{  >>>KI_C_VAR<<<
.bI "\fB>>>KI_C_VAR<<<\fP"
.dX >>>KI_C_VAR<<<
\fB>>>KI_C_VAR<<<\fP contains the number of lines, killed by
\fB>>>O_PICK<<<\fP or \fB>>>O_COPY_PICK<<<\fP.
.Ib
.\"}}}
.\"{{{  >>>M_C_VAR<<<
.bI "\fB>>>M_C_VAR<<<\fP"
.dX >>>M_C_VAR<<<
\fB>>>M_C_VAR<<<\fP contains \fB0\fP or \fB1\fP, depending on the usage
of the move-buffer.
.Ib
.\"}}}
.\"{{{  >>>VAR_PATH_SEP<<<
.bI "\fB>>>VAR_PATH_SEP<<<\fP"
.dX >>>VAR_PATH_SEP<<<
\fB>>>VAR_PATH_SEP<<<\fP is initialized at startup with the operations
systems path separator (usually '\fB/\fP').
.Ib
.\"}}}
.\"{{{  file-number
.bI "\fB>>>F_N_VAR<<<\fP"
.dX >>>F_N_VAR<<<
\fB>>>F_N_VAR<<<\fP is set to the position of the current file in the list
of edited files.  The list of edited files uses \fB0\fP.
.Ib
.\"}}}
.\"{{{  >>>DIRED_VAR<<<
.bI "\fB>>>DIRED_VAR<<<\fP"
.dX >>>DIRED_VAR<<<
\fB>>>DIRED_VAR<<<\fP controls, whether directories are displayed using
\fBdirfold \-l\fP.
.Ib
.\"}}}
.\"{{{  >>>FORCE_SH<<<
.bI "\fB>>>FORCE_SH<<<\fP"
.dX >>>FORCE_SH<<<
If \fB>>>FORCE_SH<<<\fP is not \fB0\fP, \fB>>>BOURNE_SHELL<<<\fP is used
instead of the value of environment variable \fB>>>SHELL<<<\fP.
.Ib
.\"}}}
.\"}}}
.\"{{{  global integer arrays
.nH 4 "global integer arrays"
.iX >>>DEFVAR<<<
.LP
These also have to be declared with \fB>>>DEFVAR<<<\fP:
.bI "\fB(>>>DEFVAR<<<\fP \fIdimension\fP \fB(\fP\fIvariablename\fP ... \fB))\fP"
.dX >>>DEFVAR<<<
All given \fIvariablename\fP are declared as fields of \fIdimension\fP
integer variables.  \fIdimension\fP is a non negative number constant.
.Ib
.LP
The following array is always defined:
.\"{{{  ocl-arg-field
.bI "\fB>>>OCL_ARG_RECORD_V<<<\fP"
.dX >>>OCL_ARG_RECORD_V<<<
.iX >>>OCL_ARG_V<<<
The OCL variable \fB>>>OCL_ARG_RECORD_V<<<\fP is defined with dimension
>>>DIM_OCL_CMD_OPTS<<<.  \fB>>>OCL_ARG_RECORD_V<<<(0)\fP and
\fB>>>OCL_ARG_V<<<\fP are the same variable!
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIx\fP\fB)\fP,0<\fIx\fP<>>>DIM_OCL_CMD_OPTS<<<
are initialized with \fB0\fP, unless \fB\-O>\fP\fIx\fP is used to overwrite.
.Ib
.\"}}}
.\"}}}
.\"{{{  auto-vars
.nH 4 "parameter variables"
.iX >>>DEFMACRO<<<
.LP
Variables, declared as arguments for functions, are always local.  Each
function call will use another set of variables.
.\"}}}
.\"}}}
.\"{{{  variable initialization
.nH 3 "Variable Initialization"
.LP
The variables are known for all functions/macros.  They are initialized
by 0 at startup.  The variable \fB>>>OCL_ARG_V<<<\fP is initialized with
\fB\-1\fP, if no \fB\-O\fP option is given.  Otherwise it is set as the
\fB\-O\fP options determines:
.\"{{{  <x copy from var
.bI "\fB\-O\fP [\fB>\fP\fIoff\fP]<\fIvalue\fP"
Change the value of OCL variable \fB>>>OCL_ARG_V<<<\fP to the one of
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIvalue\fP.\fB)\fP.  If \fB>\fP\fIoff\fP
is used, change \fB>>>OCL_ARG_RECORD_V<<<(\fP\fIoff\fP\fB)\fP instead.
.Ib
.\"}}}
.\"{{{  =x set to val
.bI "\fB\-O\fP  [\fB>\fP\fIoff\fP][\fB=\fP]\fIvalue\fP"
Change the value of OCL variable \fB>>>OCL_ARG_V<<<\fP to \fIvalue\fP.
If \fB>\fP\fIoff\fP is used, change
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIoff\fP\fB)\fP instead.
.Ib
.\"}}}
.\"{{{  |x or with val
.bI "\fB\-O \fP[\fB>\fP\fIoff\fP]\fB|\fP\fIvalue\fP"
Bitwise-Or the value of OCL variable \fB>>>OCL_ARG_V<<<\fP with
\fIvalue\fP.  If \fB>\fP\fIoff\fP is used, change
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIoff\fP\fB)\fP instead.
.Ib
.\"}}}
.\"{{{  &x and with val
.bI "\fB\-O \fP[\fB>\fP\fIoff\fP]\fB&\fP\fIvalue\fP"
Bitwise-And the value of OCL variable \fB>>>OCL_ARG_V<<<\fP with
\fIvalue\fP.  If \fB>\fP\fIoff\fP is used, change
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIoff\fP\fB)\fP instead.
.Ib
.\"}}}
.\"{{{  ^x xor with val
.bI "\fB\-O \fP[\fB>\fP\fIoff\fP]\fB^\fP\fIvalue\fP"
Bitwise-XOr the value of OCL variable \fB>>>OCL_ARG_V<<<\fP with
\fIvalue\fP.  If \fB>\fP\fIoff\fP is used, change
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIoff\fP\fB)\fP instead.
.Ib
.\"}}}
.\"{{{  +x add with val
.bI "\fB\-O \fP[\fB>\fP\fIoff\fP]\fB+\fP\fIvalue\fP"
Increment the value of OCL variable \fB>>>OCL_ARG_V<<<\fP with
\fIvalue\fP.  If \fB>\fP\fIoff\fP is used, change
\fB>>>OCL_ARG_RECORD_V<<<(\fP\fIoff\fP\fB)\fP instead.
.Ib
.\"}}}
.\"{{{  aliased
.bI "\fB-O\fP \fIname\fP[\fB=\fP]\fInumber\fP"
If \fIname\fP is defined as a command line alias in the current >>>RC_ENDING<<< file,
the corresponding initialization will be done. If \fB=\fP\fInumber\fP is
used, in the above mentioned options \fB?\fP can be used to replace
\fIvalue\fP by the command line argument.
.LP
In aliased commands, you can use another command:
.bI "\fB@\fP"
.iX history
.iX >>>ARG_HIST<<<
.dX @
A string given with \fB=\fP will be added to the predefined history
\fB>>>ARG_HIST<<<\fP.  A empty string will be stored as a single space.
.Ib
.Ib
.\"}}}
.wA
there will be no compile time syntax check for the given aliases!
.\"}}}
.\"{{{  usage
.nH 3 "Variables Usage"
.dX variable
.\"{{{  terms
.nH 4 "Terms"
.LP
.dX term
Variables can be used to build expressions.  The syntax for these
expressions, called \fIterm\fP in this document, is:
.\"{{{  expr
.dX +
.dX \-
.dX *
.dX >>>DIV<<<
.dX >>>MOD<<<
.bI "\fIbasic\fP | \fB\-\fP\fIterm\fP | [\fB+\fP|\fB\-\fP|\fB*\fP|\fB>>>DIV<<<\fP|\fB>>>MOD<<<\fP]\fB(\fP\fIterm\fP \fIterm\fP [\fIterm\fP .. ] \fB)\fP"
A \fIterm\fP can be a \fIbasic\fP term or a compound term.
.Ib
.\"}}}
.LP
OCL's \fIbasic\fP terms are:
.\"{{{  true
.bI \fB>>>TRUE_SYM<<<\fP
.iX >>>TRUE_SYM<<<
evaluates to 1.
.Ib
.\"}}}
.\"{{{  false
.bI \fB>>>FALSE_SYM<<<\fP
.iX >>>FALSE_SYM<<<
evaluates to 0.
.Ib
.\"}}}
.\"{{{  number
.bI "\fInumber\fP"
a signed or unsigned integer constant.
.Ib
.\"}}}
.\"{{{  char
.hI
\fB"\fP\fIchar\fP
.br
\fBC\-\fP\fIx\fP
.tI
the integer coding of the given character.
.wA
the \fB"\fP\fIchar\fP character is read as a string with length 1.  So
\fIchar\fP must be followed by a space!
.eI
.\"}}}
.\"{{{  name
.bI "\fIname\fP"
a variable
.Ib
.\"}}}
.\"{{{  name(x)
.bI "\fIname (\fP \fIterm\fP \fB)\fP"
the \fIterm\fP's entry in array \fIname\fP (index: 0,1,.. )
.Ib
.\"}}}
.\"{{{  >>>EVAL<<<
.bI "\fB>>>EVAL<<< (\fP\fIstatement\fP ... \fB)\fP"
.dX >>>EVAL<<<
.iX >>>RETVAL<<<
"\fB(\fP\fIstatement\fP ...  \fB)\fP" is called via subroutine call.  If
it is ended with "\fB>>>RETVAL<<<\fP \fIterm\fP", this value
is used.  Otherwise a random value is used as result of this expression.
.Ib
.\"}}}
.\"{{{  >>>PRE<<<
.bI "\fB>>>PRE<<< (\fP\fIstatement\fP ... \fB)\fP \fIterm\fP"
.dX >>>PRE<<<
execute \fB(\fP\fIstatement\fP ...  \fB)\fP and use the new values in
the evaluation of \fIterm\fP.
.Ib
.\"}}}
.\"{{{  >>>COUNTER<<<
.bI "\fB>>>COUNTER<<<\fP \fIcondition\fP"
.dX >>>COUNTER<<<
is 1, if the boolean expression evaluates to TRUE, otherwise 0.
.Ib
.\"}}}
.\"{{{  >>>READ_REPEAT<<<
.bI "\fB>>>READ_REPEAT<<<\fP"
.dX >>>READ_REPEAT<<<
.iX argument
.iX set-argument
Return the value accumulated by \fBset-argument-x\fP.  The repeated
execution of the command will be stopped. If \fBset-argument-x\fP was not used,
\fB\-1\fP will be returned.
.Ib
.\"}}}
.\"{{{  >>>STORE_CHAR<<<
.bI "\fB>>>STORE_CHAR<<<\fP"
.dX >>>STORE_CHAR<<<
Return the ASCII value of the character under the cursor.
.Ib
.\"}}}
.\"{{{  >>>FOLD_SL<<<
.bI \fB>>>FOLD_SL<<<\fP
.dX >>>FOLD_SL<<<
Returns the length of the fold comment start string (2, if language
\fB>>>LANG_Inmos<<<\fP is active).
.Ib
.\"}}}
.\"{{{  >>>FOLD_S<<<
.bI "\fB>>>FOLD_S<<<\fP \fIterm\fP"
.dX >>>FOLD_S<<<
Returns the \fIterm\fPs character of the fold comment start string
(which is replaced by '\fB--\fP', if language >>>LANG_Inmos<<< is active). 0 is the
first character.
.Ib
.\"}}}
.\"{{{  >>>FOLD_EL<<<
.bI \fB>>>FOLD_EL<<<\fP
.dX >>>FOLD_EL<<<
Returns the length of the fold comment end string (0, if language
\fB>>>LANG_Inmos<<<\fP is active).
.Ib
.\"}}}
.\"{{{  >>>FOLD_E<<<
.bI "\fB>>>FOLD_E<<<\fP \fIterm\fP"
.dX >>>FOLD_E<<<
Returns the \fIterm\fPs character of the fold comment end string
(which is replaced by '\fB\fP', if language >>>LANG_Inmos<<< is active). 0 is the
first character.
.Ib
.\"}}}
.\"{{{  >>>FOLD_M1<<<...
.hI
\fB>>>FOLD_M1<<<\fP \fIterm\fP
.br
\fB>>>FOLD_M2<<<\fP \fIterm\fP
.br
\fB>>>FOLD_M3<<<\fP \fIterm\fP
.br
\fB>>>FOLD_M4<<<\fP \fIterm\fP
.tI
.dX >>>FOLD_M1<<<
.dX >>>FOLD_M2<<<
.dX >>>FOLD_M3<<<
.dX >>>FOLD_M4<<<
Like \fB>>>FOLD_S<<<\fP, but uses the fold mark strings.
.eI
.\"}}}
.\"{{{  >>>FILETYPE<<<
.bI "\fB>>>FILETYPE<<<\fP"
.dX >>>FILETYPE<<<
Return a coding for the type of the current editor file.
.sI "0 for regular file"
.Is
.sI "1 for directory"
.Is
.sI "\-1 for list of edited files"
.Is
.Ib
.\"}}}
.\"{{{  >>>SET_ENTER<<<
.bI "\fB>>>SET_ENTER<<<\fP"
.dX >>>SET_ENTER<<<
Return number of entered folds.
.Ib
.\"}}}
.\"{{{  >>>SET_S_ENTER<<<
.bI "\fB>>>SET_S_ENTER<<<\fP"
.dX >>>SET_S_ENTER<<<
Return the number of leading spaces hidden by entering folds.
.Ib
.\"}}}
.\"{{{  >>>STORE_Y<<<
.bI "\fB>>>STORE_Y<<<\fP"
.dX >>>STORE_Y<<<
Return the current line number.
.Ib
.\"}}}
.\"{{{  >>>STORE_X<<<
.bI "\fB>>>STORE_X<<<\fP"
.dX >>>STORE_X<<<
Return the x-position of the cursor.  1 is first displayed character.
This may be not the first character on that text line if you have
entered indented folds.
.Ib
.\"}}}
.\"{{{  >>>DECODE_BUFFER<<<
.bI "\fB>>>DECODE_BUFFER<<<\fP \fIterm-x term-y\fP"
.dX >>>DECODE_BUFFER<<<
Return the buffer number, using the screen position (not buffer
position) \fIterm-x\fP/\fIterm-y\fP.  If the position does not belong to
a buffer, 0 is returned.
.Ib
.\"}}}
.\"{{{  >>>STORE_MARK<<<
.bI "\fB>>>STORE_MARK<<<\fP"
.dX >>>STORE_MARK<<<
.iX >>>GOTO_MARK<<<
Return a coding of the current line.  \fB>>>GOTO_MARK<<<\fP can use this
value to reach the line, even if the line has been moved in the text.
.Ib
.\"}}}
.\"{{{  origami commands
.bI "\fBorigami functions\fP"
All Origami commands can be used in terms.  This is used to set variables
with values used in \fB>>>INSERT_ASCII<<<\fP.
.Ib
.\"}}}
.LP
\fIop\fP\fB(\fP\fIe1 e2 e3\fP .. \fB)\fP is evaluated like
\fIop\fP\fB(\fP\fIop\fP\fB(\fP\fIe1 e2\fP\fB)\fP \fIe3\fP .. \fB)\fP.
.wA
The code optimizer (option \fB\-O\fP) modifies only the generated
OCL-assembler.  It cannot optimize the structure of terms!  Play with
the expressions and use \fBviewrc\fP if you need fast/short
functions/macros.
.\"}}}
.\"{{{  statements
.nH 4 "Variable statements"
.LP
The following functions deal with variables/terms and can be used in the
same way like the above mentioned statements:
.\"{{{  >>>PROMPT_COUNTER<<<
.bI "\fB>>>PROMPT_COUNTER<<<\fP \fIname message-string\fP"
.iX message-string
.dX >>>PROMPT_COUNTER<<<
Prompts \fImessage-string\fP below the status line and reads the new value for
\fIname\fP from keyboard.  Input \fIy\fP sets it to 1, \fIn\fP sets it
to 0.  All other inputs have to be decimals or a simple
>>>O_RETURN<<<.
.nB
This command does not support the full editing possibilities, you can
use with normal prompts.  Only the following commands are allowed:
.iX >>>O_DELETE<<<
.iX >>>O_RETURN<<<
.TS
tab(|);
l.
\fB>>>O_DELETE<<<\fP
\fB>>>O_RETURN<<<\fP
normal text characters
.TE
.pM \fB>>>PROMPT_COUNTER<<<\fP
.Ib
.\"}}}
.\"{{{  >>>PROMPT_CHAR<<<
.bI "\fB>>>PROMPT_CHAR<<<\fP \fIname message-string\fP"
.iX message-string
.dX >>>PROMPT_CHAR<<<
Same as \fB>>>PROMPT_COUNTER<<<\fP, but the counter \fIname\fP is set to the
ASCII-value of the next pressed key.  The value is undefined, if the
pressed key is bound to a user defined or predefined function.  The
given input will \fB>>>NOT<<<\fP be interpreted.  So a given function will not
be executed!
.pM \fB>>>PROMPT_CHAR<<<\fP
.Ib
.\"}}}
.\"{{{  >>>MENU<<<
.bI "\fB>>>MENU<<<\fP \fIname message-string\fP"
.iX message-string
.dX >>>MENU<<<
Display \fImessage-string\fP as a menu and ask for the whished item.
Items are the space separated textparts in \fImessage-string\fP.  You
can choose the items by typing the first character or by moving with
\fB>>>O_LEFT<<<\fP and \fB>>>O_RIGHT<<<\fP.  The currently chosen item is
displayed inverse (or trailing \fB>>>CURR_MARK<<<\fP, if inverse is not
possible).  The first chosen item is given by \fIname\fP (or 0, if
\fIname\fP is not in the correct range).  \fIname\fP is set to the
number of the chosen item (0..).
.LP
Leading spaces in front of the prompt will be cut.  \fImessage-string\fP
may not use characters, which are displayed with more than one character
on the screen (ctrl-chars and tab)!  If the first character of an item
is \fB>>>SPACE_CHAR<<<\fP, it will be replaced by \fB>>>SPACE<<<\fP in the
menu and the item asks for the space-character.  If the menu string is
to long for the current screen, it will be cut at the left and/or right
end and marked as a long edit line.
.pM \fB>>>MENU<<<\fP
.Ib
.\"}}}
.\"{{{  >>>GOTO_BUFFER<<<
.bI "\fB>>>GOTO_BUFFER<<<\fP \fIterm\fP"
.dX >>>GOTO_BUFFER<<<
.iX buffer
.iX >>>C_B_VAR<<<
Switch to buffer \fIterm\fP in the list of used buffers, the first one
is 1.  Uses the order from \fB>>>C_B_VAR<<<\fP.
.Ib
.\"}}}
.\"{{{  >>>GOTO_BUFFER_ID<<<
.bI "\fB>>>GOTO_BUFFER_ID<<<\fP \fIterm\fP"
.dX >>>GOTO_BUFFER_ID<<<
.iX buffer
.iX >>>C_BI_VAR<<<
Switch to the buffer with \fB>>>C_BI_VAR<<<\fP is \fIterm\fP.  The first one is 0.
.Ib
.\"}}}
.\"{{{  >>>GOTO_COUNTER<<<
.bI "\fB>>>GOTO_COUNTER<<<\fP \fIterm\fP"
.dX >>>GOTO_COUNTER<<<
Move the cursor on x-position \fIterm\fP.  1 is the first displayed
character.  If you enter a indented fold, position 1 is not the first
character on that line.
.Ib
.\"}}}
.\"{{{  goto-counter
.bI "\fBgoto-counter\fP \fIterm\fP"
.dX goto-counter
Same as above.
.Ib
.\"}}}
.\"{{{  >>>GOTO_Y<<<
.bI "\fB>>>GOTO_Y<<<\fP \fIterm\fP"
.dX >>>GOTO_Y<<<
Like \fB>>>O_GOTO_LINE<<<\fP.  The line number is the value of the expression.
.wA
Origami exits entered folds and moves to the given position.
.lC
.Ib
.\"}}}
.\"{{{  >>>GOTO_MARK<<<
.bI "\fB>>>GOTO_MARK<<<\fP \fIterm\fP"
.dX >>>GOTO_MARK<<<
.iX >>>GOTO_Y<<<
.iX >>>STORE_MARK<<<
.iX >>>M_O_VAR<<<
Like \fB>>>GOTO_Y<<<\fP, but uses the line coding, given by a
\fB>>>STORE_MARK<<<\fP statement, to reach the line directly.  The line
will be found, even if it has been moved inside the text.  Invalid codes
will be handled as if the last line has been marked.
.LP
If OCL varoable \fB>>>M_O_VAR<<<\fP is not \fB0\fP, and the cursor is on
the destination line, the command will be ignored!
.wA
Origami exits entered folds and moves to the given position.
.wA
While a marked line is inside \fBkill\-\fP, \fBmove\-\fP or
\fBdelete\-buffer\fP, the mark is invalid.  At the time, these lines
appear in the text again, the marks become valid again.
.wA
Due to memory management of origami and its reusage of memory, the
handling of marks in the following circumstances is not defined (invalid
marks or marks to random lines!):
.sI "changing the edit file of an buffer"
.Is
.sI "deleting more than >>>UNDEL_LINES<<< lines, and creating new text lines"
.Is
.lC
.Ib
.\"}}}
.\"{{{  >>>COUNTER<<<
.bI "\fB>>>COUNTER<<<\fP \fIterm\fP"
.dX >>>COUNTER<<<
The value of the expression is returned as ASCII-text.
.Ib
.\"}}}
.\"{{{  >>>INSERT_ASCII<<<
.bI "\fB>>>INSERT_ASCII<<<\fP \fIterm\fP"
.dX >>>INSERT_ASCII<<<
Insert the character with ASCII-code given by the expression into the
input stream.  There is no check whether the given value of name is a
correct ascii value.  Do it yourself!
.LP
This command can also be used, to put internal OCL-tokens into the token
stream.  This should only used by experienced OCL programmers!  Using
invalid tokens can crash Origami!
.Ib
.\"}}}
.\"{{{  >>>SET_COUNTER<<< var
.bI "\fB>>>SET_COUNTER<<<\fP \fIname term\fP"
.dX >>>SET_COUNTER<<<
The counter-variable \fIname\fP is set to the value of \fIterm\fP.
.nB
.dX set-counter
the old name \fBset-counter\fP is also valid for compatibility reasons.
.Ib
.\"}}}
.\"{{{  >>>SET_COUNTER<<< array
.bI "\fB>>>SET_COUNTER<<<\fP \fIname\fP \fB(\fP \fIterm1\fP \fB)\fP \fIterm2\fP"
.dX >>>SET_COUNTER<<<
The entry \fIterm1\fP of array \fIname\fP is set to the value of
\fIterm2\fP.
.nB
.dX set-counter
the old name \fBset-counter\fP is also valid for compatibility reasons.
.Ib
.\"}}}
.\"{{{  >>>SET_CURSOR<<<
.bI "\fB>>>SET_CURSOR<<<\fP \fIterm\fP"
.dX >>>SET_CURSOR<<<
Like \fB>>>O_FLUSH<<<\fP, but uses line \fIterm\fP instead of the
current line.
.Ib
.\"}}}
.\"{{{  >>>RETVAL<<<
.bI "\fB>>>RETVAL<<<\fP \fIterm\fP"
.dX >>>RETVAL<<<
.iX >>>RETURN<<<
.iX >>>EVAL<<<
Like \fB>>>RETURN<<<\fP, but a calling \fB>>>EVAL<<<\fP statement can use
\fIterm\fP as result.
.Ib
.\"}}}
.\"{{{  >>>CHANGE_FOLD<<<
.bI "\fB>>>CHANGE_FOLD<<<\fP \fIterm term\fP"
.dX >>>CHANGE_FOLD<<<
Uses the first \fIterm\fP as foldtype and the second as fold contents and
changes the attributes of the fold under the cursor.  These values have
specific meanings in TDS!  The values of the \fIterm\fPs are used modulo
255.
.Ib
.\"}}}
.\"{{{  >>>EXITCODE<<<
.bI "\fB>>>EXITCODE<<<\fP \fIname message-string\fP"
.iX message-string
.dX >>>EXITCODE<<<
Like \fB>>>O_FINISH<<<\fP, but uses value of OCL-variable
\fIname\fP as exit code.  \fImessage-string\fP is displayed as exit-message.
.Ib
.\"}}}
.\"}}}
.\"}}}
.\"}}}
.\"{{{  character sets
.nH 3 "Character sets"
.LP
.dX "character set"
In OCL you can use character sets to simplify boolean expressions.
Predefined character sets are:
.\"{{{  table of predefined sets
.nI
.ne 5
.TS
tab(|);
l l.
\fB>>>ALPHA_STR<<<\fP|letters \fBa\fP..\fBz\fP,\fBA\fP..\fBZ\fP
\fB>>>UPPER_STR<<<\fP|uppercase letters \fBA\fP..\fBZ\fP
\fB>>>LOWER_STR<<<\fP|lowercase letters \fBa\fP..\fBz\fP
\fB>>>DIGIT_STR<<<\fP|digits \fB0\fP..\fB9\fP
\fB>>>XDIGIT_STR<<<\fP|\fB>>>DIGIT_STR<<<\fP and letters \fBa\fP..\fBf\fP,\fBA\fP..\fBF\fP
\fB>>>ALNUM_STR<<<\fP|\fB>>>ALPHA_STR<<<\fP and \fB>>>DIGIT_STR<<<\fP
\fB>>>BLANK_STR<<<\fP|space or tab
\fB>>>SPACE_STR<<<\fP|characters generating whitespace
\fB>>>PRINT_STR<<<\fP|printing character
\fB>>>CNTRL_STR<<<\fP|control keys 0 .. 31 and delete key 127
\fB>>>GRAPH_STR<<<\fP|not space character
\fB>>>PUNCT_STR<<<\fP|punctation character: not \fB>>>ALNUM_STR<<<\fP, \fB>>>DIGIT_STR<<<\fP or \fB>>>SPACE_STR<<<\fP
.TE
.In
.\"}}}
.nB
see in  your local '\fBctype\fP' documentation for detailed information.
.LP
You can define your own sets with:
.\"{{{  >>>DEFSET<<<
.bI "\fB(>>>DEFSET<<<\fP \fIname\fP \fB(\fP \fIelement\fP ... \fB))\fP"
.dX >>>DEFSET<<<
The character set name is declared.  Elements are all characters given
in the \fIelement\fP-list.  \fIelement\fP can be:
.nI
.ne 3
.TS
tab(|);
l l.
\fIname\fP|the name of a known character set
\fB"\fP\fIx\fP|a normal character
\fBC\-\fP\fIx\fP|a control character
.TE
.In
.Ib
.\"}}}
Inside functions/macros you can use \fB>>>DEFSET<<<\fP as Origami function:
.\"{{{  >>>DEFSET<<< inside macros
.bI "\fB>>>DEFSET<<<\fP \fIdest source\fP"
.dX >>>DEFSET<<<
The value of set \fIdest\fP is overwritten by the set \fIsource\fP.
\fIdest\fP has to be a user-defined set.  The predefined sets cannot be
redefined.
.Ib
.\"}}}
.\"}}}
.\"{{{  boolean expressions
.nH 3 "Boolean expressions"
.LP
The boolean expressions \fIcondition\fP mentioned above can be:
.\"{{{  boolean basicfunctions
.iX boolean basics
.\"{{{  >>>TRUE_SYM<<<
.sI \fB>>>TRUE_SYM<<<\fP"
.Is
.dX >>>TRUE_SYM<<<
.\"}}}
.\"{{{  >>>FALSE_SYM<<<
.sI \fB>>>FALSE_SYM<<<\fP"
.Is
.dX >>>FALSE_SYM<<<
.\"}}}
.\"{{{  >>>LASTMES<<<
.bI "\fB>>>LASTMES<<<\fP \fImessage-name\fP"
.dX >>>LASTMES<<<
Is true if the last message created by a string from file >>>MSG_ENDING<<< in the
Origami source directory was \fImessage-name\fP.  A successful test will
set the last displayed message to a dummy value, so that
\fB>>>LASTMES<<<\fP \fIx\fP will be false until a new message is
displayed.  Using Origami-messages in prompts changes the last displayed
message.  The appendix contains the list of known messages.
.Ib
.\"}}}
.\"{{{  >>>TEST_CHANGED<<<
.bI "\fB>>>TEST_CHANGED<<<\fP"
.dX >>>TEST_CHANGED<<<
Is true if the current file has been changed.
.Ib
.\"}}}
.\"{{{  >>>TEST_FILED<<<
.bI "\fB>>>TEST_FILED<<<\fP"
.dX >>>TEST_FILED<<<
Is true if the current line is a file-folded-line.
.Ib
.\"}}}
.\"{{{  >>>TEST_FOLD_LINE<<<
.bI "\fB>>>TEST_FOLD_LINE<<<\fP"
.dX >>>TEST_FOLD_LINE<<<
Is true if the current line is a closed-fold-line.
.Ib
.\"}}}
.\"{{{  >>>TEST_BEGIN_FOLD<<<
.bI "\fB>>>TEST_BEGIN_FOLD<<<\fP"
.dX >>>TEST_BEGIN_FOLD<<<
Is true if the current line is the {\&{\&{ line of a open fold.
.Ib
.\"}}}
.\"{{{  >>>TEST_END_FOLD<<<
.bI "\fB>>>TEST_END_FOLD<<<\fP"
.dX >>>TEST_END_FOLD<<<
Is true if the current line is the }\&}\&} line of a open fold.
.Ib
.\"}}}
.\"{{{  >>>TEST_TEXT<<<
.bI "\fB>>>TEST_TEXT<<<\fP"
.dX >>>TEST_TEXT<<<
Is true if the current line is a normal text-line.
.Ib
.\"}}}
.\"{{{  >>>TEST_TOP<<<
.bI "\fB>>>TEST_TOP<<<\fP"
.dX >>>TEST_TOP<<<
Is true if the current line is the top of the entered fold.
.Ib
.\"}}}
.\"{{{  >>>TEST_BOTTOM<<<
.bI "\fB>>>TEST_BOTTOM<<<\fP"
.dX >>>TEST_BOTTOM<<<
Is true if the current line is the bottom of the entered fold.
.Ib
.\"}}}
.\"{{{  >>>TEST_CHAR_C<<<
.bI "\fB>>>TEST_CHAR_C<<<\fP \fIterm\fP"
.dX >>>TEST_CHAR_C<<<
Is true if the ASCII-value of the character under the cursor is equal to
value of the expression.
.Ib
.\"}}}
.\"{{{  >>>TEST_CHAR_LOW_C<<<
.bI "\fB>>>TEST_CHAR_LOW_C<<<\fP \fIterm\fP"
.dX >>>TEST_CHAR_LOW_C<<<
Is true if the ASCII-value of the character under the cursor is less
than the value of the expression.
.Ib
.\"}}}
.\"{{{  >>>TEST_CHAR_HIGH_C<<<
.bI "\fB>>>TEST_CHAR_HIGH_C<<<\fP \fIterm\fP"
.dX >>>TEST_CHAR_HIGH_C<<<
Is true if the ASCII-value of the character under the cursor is greater
than the value of the expression.
.Ib
.\"}}}
.\"{{{  >>>TEST_CHAR_SET<<<
.bI "\fB>>>TEST_CHAR_SET<<<\fP \fIname\fP"
.dX >>>TEST_CHAR_SET<<<
Is true if the character under the cursor is in the given character set
\fIname\fP.
.Ib
.\"}}}
.\"{{{  >>>TEST_STR<<<
.bI "\fB>>>TEST_STR<<<\fP \fImessage-string\fP"
.dX >>>TEST_STR<<<
Is true if the string, beginning at the cursor and \fImessage-string\fP are the
same.
.Ib
.\"}}}
.\"{{{  >>>TEST_LANG<<<
.hI
\fB>>>TEST_LANG<<< "\fP\fIx\fP
.br
\fB>>>TEST_LANG<<< \fP\fIlanguage-name\fP
.tI
.dX >>>TEST_LANG<<<
.iX language
Is true if \fIx\fP is the language used by \fB>>>O_LANGUAGE<<<\fP.  Instead
of the single character '\fIx\fP', you can use the language names, like
given in chapter \fBProcessing Origami Files\fP.
.iX "Processing Origami Files"
.eI
.\"}}}
.\"{{{  relop
.dX <
.dX <=
.dX =
.dX <>
.dX >=
.dX >
.bI "[\fB<\fP|\fB<=\fP|\fB=\fP|\fB<>\fP|\fB>=\fP|\fB>\fP]\fB(\fP \fIterm1\fP .. \fItermN\fP \fB)\fP"
Is true, if \fItermI OP termI+1\fP is true for all I=1..N-1.  No term is
evaluated more than once.  If \fItermI OP termI+1\fP is false for I, the
following terms are not evaluated.
.Ib
.\"}}}
.\"{{{  >>>TEST_BEGIN_LINE<<<
.bI "\fB>>>TEST_BEGIN_LINE<<<\fP"
.dX >>>TEST_BEGIN_LINE<<<
Is true if the cursor is placed on or before the first non-space-character
of the current line.
.Ib
.\"}}}
.\"{{{  >>>TEST_END_LINE<<<
.bI "\fB>>>TEST_END_LINE<<<\fP"
.dX >>>TEST_END_LINE<<<
Is true if the cursor is placed behind the last non-space-character of the
current line.
.Ib
.\"}}}
.\"{{{  >>>EDITING<<<
.bI "\fB>>>EDITING<<<\fP"
.dX >>>EDITING<<<
Is true if Origami is not waiting for a normal edit-character (for
example when prompting for a filename).
.Ib
.\"}}}
.\"{{{  >>>TEST_GEN_FOLD<<<
.bI "\fB>>>TEST_GEN_FOLD<<<\fP"
.dX >>>TEST_GEN_FOLD<<<
.iX >>>M_O_VAR<<<
.iX >>>OCL_ARG_V<<<
.iX >>>O_CREATE_FOLD<<<
Is true, if Origami is in create-fold or highlight mode.  The OCL
variable \fB>>>OCL_ARG_V<<<\fP is set to the value of \fB>>>M_O_VAR<<<\fP at
\fB>>>O_CREATE_FOLD<<<\fP call.
.Ib
.\"}}}
.\"{{{  >>>TEST_OVER<<<
.bI "\fB>>>TEST_OVER<<<\fP"
.dX >>>TEST_OVER<<<
.iX overwrite-mode
Is true if Origami is in overwrite-mode.
.Ib
.\"}}}
.\"{{{  >>>TEST_HASH<<<
.bI "\fB>>>TEST_HASH<<<\fP"
.dX >>>TEST_HASH<<<
.iX hash-shift-mode
Is true if Origami is in \fBhash-shift\fP mode.
.Ib
.\"}}}
.\"{{{  >>>TEST_AUTO<<<
.bI "\fB>>>TEST_AUTO<<<\fP"
.dX >>>TEST_AUTO<<<
.iX autosave-mode
.iX >>>DEFAUTOSAVE<<<
Is true if Origami is in autosave-mode.
.Ib
.\"}}}
.\"{{{  >>>TEST_ECHO<<<
.bI "\fB>>>TEST_ECHO<<<\fP"
.dX >>>TEST_ECHO<<<
Is true if Origami is in echo-mode.
.Ib
.\"}}}
.\"{{{  >>>TEST_VIEW<<<
.bI "\fB>>>TEST_VIEW<<<\fP"
.dX >>>TEST_VIEW<<<
.iX view-mode
Is true if Origami is in view-mode.
.Ib
.\"}}}
.\"{{{  >>>TEST_VERBOSE<<<
.bI "\fB>>>TEST_VERBOSE<<<\fP"
.dX >>>TEST_VERBOSE<<<
.iX verbose
Is true if Origami is in verbose-mode.
.Ib
.\"}}}
.\"{{{  >>>TEST_TERM<<<
.bI "\fB>>>TEST_TERM<<<\fP [\fB(\fP] \fIterminal-name\fP [ ... \fB)\fP"
.dX >>>TEST_TERM<<<
.iX terminal
.iX message-string
Is true, if environment variable \fB>>>TERM<<<\fP is set to one of the
given \fIterminal-name\fPs.  \fIterminal-name\fP can be given as
identifier or string (with leading \fB"\fP.).  If \fIterminal-name\fP
end with a \fB*\fP, the test is true, if \fBTERM\fP starts with
\fIterminal-name\fP, without the \fB*\fP.  The empty list evaluated to
\fBFALSE\fP.
.Ib
.\"}}}
.\"{{{  term
.bI "\fIterm\fP"
.iX term
Is true if the given expression evaluates to non-zero.
.Ib
.\"}}}
.\"}}}
.\"{{{  boolean operators
.\"{{{  >>>PRE<<<
.bI "\fB>>>PRE<<< (\fP\fIstatement\fP ... \fB)\fP \fIcondition\fP"
.dX >>>PRE<<<
The sequence of \fIstatement\fP will be executed before the evaluation
of \fIcondition\fP.
.Ib
.\"}}}
.\"{{{  >>>NOT<<<
.bI "\fB>>>NOT<<<(\fP\fIcondition\fP\fI)\fP"
.dX >>>NOT<<<
The value of \fIcondition\fP is logically negated.
.Ib
.\"}}}
.\"{{{  >>>AND<<<
.bI "\fB>>>AND<<<(\fP\fIcondition\fP [ \fIcondition\fP ... ] \fB)\fP"
.dX >>>AND<<<
Is true if all \fIcondition\fPs are true.
.Ib
.\"}}}
.\"{{{  >>>OR<<<
.bI "\fB>>>OR<<<(\fP\fIcondition\fP [ \fIcondition\fP ... ] \fB)\fP"
.dX >>>OR<<<
Is true if one of the \fIcondition\fPs is true.
.Ib
.\"}}}
.\"}}}
.\"{{{  comments
.nB
OCL uses short-circuit evaluation for \fB>>>AND<<<\fP and \fB>>>OR<<<\fP.  When
Origami is prompting for information (for example, asking to overwrite
an existing file during \fBtoggle-create-file-fold\fP), you can just use
the part of OCL also allowed in >>>PRO_IN<<< and >>>PRO_OUT<<<.
For historical reasons it is allowed to use delimiters \fB,\fP in the
expression lists for \fB>>>AND<<<\fP and \fB>>>OR<<<\fP.
.\"}}}
.\"}}}
.\"{{{  area
.nH 3 "The display area"
.LP
.iX area
.iX "display area"
Origami can use a part of the screen to continuously display a text in
the same manner as the status line.  This area cannot be edited with the
normal editing commands.  The text appears below the status line if it
is enabled, with the last line highlighted.  Otherwise the text appears
below the editing area.  Controlling this text display area is
restricted to the following OCL statements:
.\"{{{  >>>HELP_SET<<<
.bI "\fB>>>HELP_SET<<<\fP \fIterm\fP"
.dX >>>HELP_SET<<<
The OCL expression is used to set the size of the new area.  If its value
is 0, no text area will be displayed.  Otherwise the value determines the
number of lines in the new and empty text area.
.Ib
.\"}}}
.\"{{{  >>>HELP_W<<<
.bI "\fB>>>HELP_W<<<\fP \fIvariable variable message-string\fP"
.iX message-string
.dX >>>HELP_W<<<
Origami uses the variables as x- / y position where to write the
string \fImessage-string\fP.
.Ib
.\"}}}
.\"}}}
.\"{{{  modes
.nH 3 "User defined modes"
.LP
.iX modes
In addition to the predefined modes you can define up to >>>MODE_COUNT<<< new pairs
of strings which can be displayed as modes in the status line:
.\"{{{  >>>DEFMODE<<<
.bI "\fB(>>>DEFMODE<<<\fP \fIname longstring shortstring\fP\fB)\fP"
.dX >>>DEFMODE<<<
.iX "long statusline"
.iX statusline
\fIname\fP is a new mode.  \fIlongstring\fP is displayed in the status
line when the mode is active.  If the status line becomes to long,
\fIshortstring\fP is used.  \fIlongstring\fP and \fIshortstring\fP are
normal strings (length is limited by >>>BIND_NAME_LEN<<<).  \fIname\fP is a normal
identifier.
.Ib
.\"}}}
.LP
Usermodes are controlled by the following Origami commands.  They can be
used as normal Origami commands in every \fB(>>>DEFMACRO<<< \fP\&.\&.\&.\fB )\fP,
\fB(>>>INITMACRO<<< \fP\&.\&.\&.\fB )\fP and \fB(>>>DEFOP<<< \fP\&.\&.\&.\fB )\fP.
.\"{{{  >>>SET_U_M_N<<<
.bI "\fB>>>SET_U_M_N<<<\fP \fIname term\fP"
.dX >>>SET_U_M_N<<<
Usermode \fIname\fP is activated.  At this point, \fIname\fP must be
defined as usermode!  If \fIterm\fP does not evaluate to 0, this value
will be displayed after the mode string.
.Ib
.\"}}}
.\"{{{  >>>SET_U_M<<<
.bI "\fB>>>SET_U_M<<<\fP \fIname\fP"
.dX >>>SET_U_M<<<
Usermode \fIname\fP is activated.  At this point, \fIname\fP must be
defined as user mode!
.Ib
.\"}}}
.\"{{{  >>>RESET_U_M<<<
.bI "\fB>>>RESET_U_M<<<\fP \fIname\fP"
.dX >>>RESET_U_M<<<
Usermode \fIname\fP is reset.  At this point, \fIname\fP must be defined
as user mode!
.Ib
.\"}}}
.\"}}}
.\"{{{  multiple keyboards
.nH 3 "Multiple keyboard modes"
.\"{{{  declaration
.LP
.iX keyboards
To create more complex keybindings (for example a \fBvi\fP emulation
with modes), OCL offers the possibility to use different keyboard
translation tables.  To do this, you must declare the used key tables
with:
.\"{{{  >>>MULTIKBD<<<
.bI "\fB(>>>MULTIKBD<<< (\fP\fIname\fP ... \fB))\fP"
.dX >>>MULTIKBD<<<
where \fIname\fP is a normal string.  This command has two effects:
.nI
Keybind initializes a key table for each \fIname\fP.
.In
and
.nI
The macros \fIname\fP are defined and can be used within other macro
definitions to switch to a certain keytab.  Like macros, defined with
\fB>>>DEFOP<<<\fP, they are not stored in fixed macro buffers, but you can
use them for your one function/macro definitions.
.In
.nB
the definition of keyboard translation tables can be spread over
multiple \fB( >>>MULTIKBD<<<\fP ... \fB)\fP statements. So the following
OCL sources have the same meaning:
.\"{{{  single statement
.DS
\fB( >>>MULTIKBD<<<\fP \fB( \fP \fIkbd_1 kbd_2\fP \fB) )\fP
.DE
.\"}}}
and
.\"{{{  sequence of statements
.DS
\fB( >>>MULTIKBD<<<\fP \fIkbd_1\fP \fB)\fP
\fB( >>>MULTIKBD<<<\fP \fIkbd_2\fP \fB)\fP
.DE
.\"}}}
.Ib
.\"}}}
.\"}}}
.\"{{{  bindings
.LP
The first defined mode is active when starting Origami.  The definition
of a declared keyboard can be done with:
.\"{{{  >>>KBD<<<
.bI "\fB(>>>KBD<<<\fP \fIname\fP \fB(>>>KEYDEF<<<\fP ... \fB)\fP ... \fB)\fP"
.dX >>>KBD<<<
All given bindings are put into the keytable for <name>.  \fB(>>>KEYDEF<<<
>>>O_BREAK<<< ... )\fP must be declared outside any \fB(>>>KBD<<<\fP ... \fB)\fP
statement, which means you can only have one abort key for all modes.
If using multiple keyboard modes, no other \fB(>>>KEYDEF<<<\fP ... \fB)\fP
statement is allowed outside \fB(>>>KBD<<<\fP ... \fB)\fP statements.
.LP
Using this statement more than once for a specific keytable adds all
given bindings to the given mode.
.Ib
.\"}}}
.\"}}}
.\"}}}
.\"{{{  terminals
.nH 3 "Terminals"
.LP
.iX >>>TERMINAL<<<
You can configure Origami for different terminals in one >>>RC_ENDING<<< file by using
\fB>>>TERMINAL<<<\fP.  Terminal dependent aliases can be declared on toplevel
via:
.\"{{{  terminal alias
.bI "\fB(>>>TERMINAL<<<\fP [ \fB(\fP ] \fIname\fP [ ... \fB)\fP ] \fB(>>>KEYALIAS<<<\fP ... \fB)\fP ... \fB)\fP"
.dX >>>TERMINAL<<<
.iX >>>KEYALIAS<<<
The corresponding alias definitions will be used for the different
terminals.  Terminal dependent aliases inside the \fB(>>>KEYALIAS<<<\fP ...
\fB)\fP statements are handled for each terminal.  The given aliases are
internally stored as \fItermname\fP\fB@\fP\fIaliasname\fP.  Use \fBautoalias\fP
to generate your alias declarations.
.Ib
.\"}}}
.LP
Terminal dependent bindings can be used inside and outside of
\fB(>>>KBD<<<\fP \&.\&.\&.  \fB)\fP statements.  The declaration has to be
made like:
.\"{{{  terminal >>>KEYDEF<<<
.bI "\fB(>>>TERMINAL<<<\fP [ \fB(\fP ] \fIname\fP [ ... \fB)\fP ] \fB(>>>KEYDEF<<<\fP ... \fB)\fP ... \fB)\fP"
.dX >>>TERMINAL<<<
.iX >>>KEYDEF<<<
The \fB(>>>KEYDEF<<<\fP \&..\&.\&\fB )\fP commands inside this statement
are only active if Origami is used on a terminal named \fIname\fP (value
of environment variable >>>ORITERM<<< or >>>TERM<<<).  Used aliases have
to be declared globally or must be declared as terminal dependent for
all named terminals.  If a alias is not declared for one of the given
terminals, the bindings will not be done for this terminal and a
errormessage will be printed.
.Ib
.\"}}}
.LP
.iX >>>DEFAULT<<<
Using \fB>>>DEFAULT<<<\fP as terminalname in \fB(>>>TERMINAL<<<\fP ..\&. \fB)\fP
statements is allowed.  The corresponding binding will only be done for
the default-table.
.wA
Binding sequences to an as yet not used terminal copies the currently
known part of the default terminal.
.nB
This is not the whole story! we are still trying to work out how to express
this accurately!
.LP
Some different terminals use the same character sequences for their
different keys.  To prevent multiple keytables for these terminals, you
can use:
.\"{{{  >>>TERMALIAS<<<
.bI "\fB(>>>TERMALIAS<<<\fP \fItermname\fP \fB(\fP \fIaliastermname\fP ... \fB))\fP"
.dX >>>TERMALIAS<<<
If \fB$>>>TERM<<<\fP/\fB$>>>ORITERM<<<\fP is set to one of the
\fIaliastermname\fPs, the keytable for \fItermname\fP is used.  If
\fIaliastermname\fP ends with \fB*\fP, \fB*\fP matches any text.
.Ib
.\"}}}
.\"}}}
.\"{{{  conditional compilation
.nH 3 "Conditional compilation"
.LP
.iX "Conditional compilation"
OCL offers the possibility to use the same OCL source for different
keybindings by using the commands \fB@>>>if_u_name<<<\fP and \fB@>>>COMPUSE<<<\fP to
control the compilation of the OCL source.  Some parts of the source
will be handled like comments (like #if .. #endif in C).
.\"{{{  >>>COMPUSE<<< (..)
.bI "\fB@>>>COMPUSE<<< (\fP \fIname\fP ... \fB)\fP"
.dX @>>>COMPUSE<<<
From now on the identifiers \fIname\fP ... are known as set tags.
.Ib
.\"}}}
.\"{{{  >>>COMPUSE<<< >>>NOT<<<(..)
.bI "\fB@>>>COMPUSE<<< >>>NOT<<<(\fP \fIname\fP ... \fB)\fP"
.dX @>>>COMPUSE<<<
.dX >>>NOT<<<
From now on the identifiers \fIname\fP ... are not known as set tags.
.Ib
.\"}}}
.\"{{{  >>>if_u_name<<< (..)
.bI "\fB@>>>if_u_name<<< (\fP \fItag\fP ... \fB)\fP \fIstatement\fP ...  \fB@fi\fP"
.dX @>>>if_u_name<<<
.dX @fi
The list of statements will only be compiled if one of the tags is set.
.Ib
.\"}}}
.\"{{{  >>>if_u_name<<< >>>NOT<<<(..)
.bI "\fB@>>>if_u_name<<< >>>NOT<<<(\fP \fItag\fP ... \fB)\fP  \fIstatement\fP ...  \fB@fi\fP"
.dX @>>>if_u_name<<<
.dX >>>NOT<<<
.dX @fi
The list of statements will only be compiled if none of the tags is set.
.Ib
.\"}}}
.wA
.iX "filed fold"
if a filed fold appears inside
\fB@>>>if_u_name<<<\fP \fB(\fP \fInot-defined-tag\fP \fB)\fP, the fold
will not be read to speed up compilation.  In this way it is impossible
to start a \fB@>>>if_u_name<<<\fP-block in one file and end it in
another !
.\"}}}
.\"{{{  specials
.nH 3 "Special commands"
.LP
.\"{{{  limiters
.\"{{{  mode limiter
.bI "\fB(>>>MODE_COMMA<<< \fP\fIchar\fP\fB)\fP"
.dX >>>MODE_COMMA<<<
.iX ".origami>>>MSG_ENDING<<<"
The character, which is used to limit the modes is replaced by
\fIchar\fP.  This overwrites changes made in the \fB.origami>>>MSG_ENDING<<<\fP
file.
.Ib
.\"}}}
.\"{{{  line limiter
.bI "\fB(>>>LINEEND<<< \fP\fIchar\fP\fB)\fP"
.dX >>>LINEEND<<<
.iX ".origami>>>MSG_ENDING<<<"
.iX User
.iX "long statusline"
The character, which is used to mark long lines is replaced by
\fIchar\fP.  This overwrites changes made in the \fB.origami>>>MSG_ENDING<<<\fP
file.  This character is also used, to mark cut strings in language
\fBUser\fP.
.Ib
.\"}}}
.\"{{{  shift mark
.bI "\fB(>>>LINESTART<<< \fP\fIchar\fP\fB)\fP"
.dX >>>LINESTART<<<
.iX ".origami>>>MSG_ENDING<<<"
The character, which is used to mark lines, shifted to the left.  This
overwrites changes made in the \fB.origami>>>MSG_ENDING<<<\fP file.  If
\fB>>>LINESTART<<<\fP is set to space, no marks are printed!
.Ib
.\"}}}
.\"}}}
.\"{{{  >>>OS_EXT<<<
.bI "\fB(>>>OS_EXT<<< (\fP \fIelement\fP ... \fB))\fP"
.dX >>>OS_EXT<<<
Keybind generates a >>>RC_ENDING<<<-file entry, containing the given text.  The
standard UN*X Origami will ignore these entries, but special ports to
non-UN*X operating-systems may use these entries for their own purposes.
\fIelement\fP can be:
.\"{{{  string
.sI \fIstring\fP
.Is
.\"}}}
.\"{{{  function
.bI \fIfunction-name\fP
will be replaced by the used macro place!
.Ib
.\"}}}
.\"{{{  history
.bI "\fB>>>HISTORY<<<\fP \fIhistory-name\fP"
will be replaced by the internal history id!
.Ib
.\"}}}
.\"{{{  mode
.bI "\fB>>>KBD<<<\fP \fIname\fP"
will be replaced by the internal keyboard number (0,1,..)!
.Ib
.\"}}}
.Ib
.\"}}}
.\"{{{  >>>COMMENT<<<
.bI "\fB@>>>COMMENT<<<\fP \fItext\fP"
.dX @>>>COMMENT<<<
All text following \fB@>>>COMMENT<<<\fP up to the end of line will be put
unchanged into the >>>RC_ENDING<<<-file.  Origami always ignores this >>>RC_ENDING<<<-file entry.
.Ib
.\"}}}
.\"{{{  >>>OPP_ERROR<<<
.bI "\fB@>>>OPP_ERROR<<<\fP \fItext\fP"
.dX @>>>OPP_ERROR<<<
Generate a compilation error.  Report all \fItext\fP following
\fB@>>>OPP_ERROR<<<\fP up to the end of the line as error-message.
.Ib
.\"}}}
.\"{{{  >>>LINENO<<<
.bI "\fB@>>>LINENO<<<\fP \fIline number\fP"
.dX @>>>LINENO<<<
Sets the line position in the current file to \fIline number\fP.
Useful for OCL-filters, which add/delete lines in the OCL source.
.Ib
.\"}}}
.LP
The following functions are special commands, for internal use.  Only
experienced OCL programmers should use these functions.  They can be
bound to keysequences (except \fB>>>ECHO_B<<<\fP, \fB>>>ECHO_P<<<\fP,
\fB>>>SAVE_LAYOUT<<<\fP, \fB>>>RESTORE_LAYOUT<<<\fP,
\fB>>>POP_DELBUFF<<<\fP,\fB>>>HISTORY<<<\fP, \fB>>>HISTORY_GET<<<\fP and
\fB>>>HISTORY_EDIT<<<\fP) or used in functions/macros.
.\"{{{  >>>ECHO_B<<<
.bI "\fB>>>ECHO_B<<<\fP \fIterm\fP"
.iX terminal
.dX >>>ECHO_B<<<
\fB>>>ECHO_B<<<\fP ignores \fB>>>SCROFF<<<\fP,\fB>>>SCRON<<<\fP and send byte
\fIterm\fP to stdout (terminal).
.Ib
.\"}}}
.\"{{{  >>>ECHO_P<<<
.bI "\fB>>>ECHO_P<<<\fP \fImessage-string\fP"
.iX terminal
.iX message-string
.dX >>>ECHO_P<<<
Like \fB>>>ECHO_B<<<\fP, but send the string \fImessage-string\fP.
.Ib
.\"}}}
.\"{{{  >>>HISTORY<<<
.bI "\fB>>>HISTORY<<<\fP \fIhistory-name\fP"
.dX >>>HISTORY<<<
.iX history
Do not use the default histories for prompting commands. The default
history is replaced by the history \fIhistory-name\fP. Predefined are:
.\"{{{  table of of predefined histories
.dX >>>SEARCH_HIST<<<
.dX >>>REPL_HIST<<<
.dX >>>MISC_HIST<<<
.dX >>>FILE_HIST<<<
.dX >>>SHELL_HIST<<<
.dX >>>ERR_HIST<<<
.dX >>>ARG_HIST<<<
.dX >>>MATCH_HIST<<<
.dX >>>NO_MATCH_HIST<<<
.dX >>>NO_HIST<<<
.dX >>>DEFAULT<<<
.TS
tab(|);
l l.
name:|history, used in:
\fB>>>SEARCH_HIST<<<\fP|\fB>>>O_FIND<<<\fP, ..
\fB>>>REPL_HIST<<<\fP|\fB>>>O_REPLACE<<<\fP, ..
\fB>>>MISC_HIST<<<\fP|\fB>>>O_GOTO_LINE<<<\fP, ..
\fB>>>FILE_HIST<<<\fP|\fB>>>O_OPEN_NEW_FILE<<<\fP, ..
\fB>>>SHELL_HIST<<<\fP|\fB>>>O_SHELL<<<\fP, ..
\fB>>>ERR_HIST<<<\fP|error messages are stored here
\fB>>>ARG_HIST<<<\fP|list of aliased command line arguments
\fB>>>MATCH_HIST<<<\fP|used for \fB\-f\fP in directory edit mode.
\fB>>>NO_MATCH_HIST<<<\fP|used for \fB\-F\fP in directory edit mode.
\fB>>>NO_HIST<<<\fP|no history
\fB>>>DEFAULT<<<\fP|use standard histories
.TE
.\"}}}
Other histories are declared outside of functions/macros with:
.\"{{{  >>>HISTORY<<<
.bI "\fB( >>>HISTORY<<<\fP \fIhistory-name\fP \fB)\fP"
.dX >>>HISTORY<<<
.iX history
.iX >>>HISTORY_EDIT<<<
.Ib
.\"}}}
.Ib
.\"}}}
.\"{{{  >>>HISTORY_EDIT<<<
.bI "\fB>>>HISTORY_EDIT<<<\fP \fIhistory-name message-string\fP"
.iX message-string
.dX >>>HISTORY_EDIT<<<
.iX history
Prompt for a string and use history \fIhistory-name\fP.
.Ib
.\"}}}
.\"{{{  >>>HISTORY_EDIT_L<<<
.bI "\fB>>>HISTORY_EDIT_L<<<\fP \fIhistory-name message-string\fP"
.iX message-string
.dX >>>HISTORY_EDIT_L<<<
.iX >>>HISTORY_EDIT<<<
.iX history
Like \fB>>>HISTORY_EDIT<<<\fP, but the prompt is initialized with the
current line and cursor position.  Spaces from entered folds are
skipped.
.Ib
.\"}}}
.\"{{{  >>>HISTORY_EDIT_F<<<
.bI "\fB>>>HISTORY_EDIT_F<<<\fP \fIhistory-name message-string\fP"
.iX message-string
.dX >>>HISTORY_EDIT_F<<<
.iX >>>HISTORY_EDIT<<<
.iX history
Like \fB>>>HISTORY_EDIT<<<\fP, but the prompt is initialized with the
current filename.
.Ib
.\"}}}
.\"{{{  >>>HISTORY_GET<<<
.bI "\fB>>>HISTORY_GET<<<\fP \fIhistory-name term\fP"
.dX >>>HISTORY_GET<<<
.iX history
Insert a string from history list \fIhistory-name\fP into the input
stream.  \fIterm\fP gives the number of the chosen item (0 is newest, 1
is one before, ...).
.Ib
.\"}}}
.\"{{{  note beside: histories=string-vars
.nB
histories can be used as string variables.
.\"}}}
.\"{{{  >>>POP_DELBUFF<<<
.bI "\fB>>>POP_DELBUFF<<<\fP"
.dX >>>POP_DELBUFF<<<
.iX delete buffer
Remove the last deleted line from the delete buffer. There is \fBno\fP
undo for this action.
.eI
.\"}}}
.\"{{{  >>>SCROFF<<<
.bI "\fB>>>SCROFF<<<\fP"
.dX >>>SCROFF<<<
Turn off the screen display.  If keyboard input is expected and the screen is
switched off, the abort key is automatically invoked and the display turned
on again.
.Ib
.\"}}}
.\"{{{  >>>SCRON<<<
.bI "\fB>>>SCRON<<<\fP"
.dX >>>SCRON<<<
Turn on the screen display.  You have to call \fB>>>O_FLUSH<<<\fP yourself.
.Ib
.\"}}}
.\"{{{  >>>SAVE_LAYOUT<<<
.bI \fB>>>SAVE_LAYOUT<<<\fP
.dX >>>SAVE_LAYOUT<<<
Saves the current window positions.  There is no stack, so using this
command more than once will overwrite the data.
.Ib
.\"}}}
.\"{{{  restore-layout
.bI \fB>>>RESTORE_LAYOUT<<<\fP
.dX >>>RESTORE_LAYOUT<<<
.iX >>>SAVE_LAYOUT<<<
Try to restore the buffer sizes and positions to the ones, saved by the
last \fB>>>SAVE_LAYOUT<<<\fP command.  The screen will be refreshed.  New
buffers always set their saved size to 0 lines and 0 columns.  However,
the minimum size for the current buffer is >>>TXT_MIN_H<<< lines and >>>TXT_MIN_W<<<
columns.
.Ib
.\"}}}
.\"{{{  >>>O_PROMPT<<<
.bI "\fB>>>O_PROMPT<<<\fP"
.dX >>>O_PROMPT<<<
.iX >>>SCROFF<<<
.iX >>>SCRON<<<
.iX >>>O_FLUSH<<<
Refresh the current line.  \fB>>>SCROFF<<<\fP/\fB>>>SCRON<<<\fP can be used for
single line operations, without redrawing the complete screen.
.Ib
.\"}}}
.LP
There are a special OCL commands, which can be used to load/remove
demand loaded macros:
.\"{{{  >>>LOAD<<<
.bI "\fB>>>LOAD<<< (\fP \fIname\fP \&.\&. \fB)\fP"
.dX >>>LOAD<<<
.iX >>>DEMAND<<<
Tries to load all named functions. May be used to speed up libraries,
using many demand loaded functions.
.Ib
.\"}}}
.\"{{{  >>>LOAD<<< >>>NOT<<<
.bI "\fB>>>LOAD<<< >>>NOT<<<(\fP \fIname\fP .. \fB)\fP"
.dX ">>>LOAD<<< >>>NOT<<<"
.iX >>>NOT<<<
.iX >>>LOAD<<<
.iX >>>DEMAND<<<
Remove the functions \fIname\fP .., if they are a demand loaded.  If one
of the functions is needed again, it will be loaded automatically.
.wA
there are no test, if the macro is currently in use.  Origami may die, if
you remove a used macro!
.Ib
.\"}}}
.\"}}}
.\"{{{  references
.nH 3 "References"
.LP
.iX references
The following command can be used to generate additional text files
while compiling new binding:
.\"{{{  reference-begin/end
.hI
\fB@>>>STARTREF<<<\fP
.br
  <comments>
.br
      :
.br
\fB@>>>end_ref<<<\fP
.tI
.dX @>>>STARTREF<<<
.dX @>>>end_ref<<<
If the command line option \fB\-r\fP\fIreferencefile\fP is active, all
comments will be put into \fIreferencefile\fP.  The text between the
\fB@>>>STARTREF<<<\fP / \fB>>>end_ref<<<\fP marks will not be parsed as OCL
code, so that the commands must appear at the beginning of a line and
must be followed by a newline.  If the command line option \fB\-R\fP is
active, the data will copied to the >>>RC_ENDING<<< file.  Origami can display it
with \fB>>>O_HELP<<<\fP, if no other helpfile is given.  The lines are cut, if
they have more than >>>RC_HELP_LEN<<< characters.
.eI
.\"}}}
.LP
The next command can be used, to store different help pages in the rc
file:
.\"{{{  reference-begin-class/end
.hI
\fB@>>>STARTREF_NO<<<\fP \fBname\fP
.br
  <comments>
.br
      :
.br
\fB@>>>end_ref<<<\fP
.br
.tI
.dX @>>>STARTREF_NO<<<
.dX @>>>end_ref<<<
.iX >>>O_HELP<<<
.iX >>>M_O_VAR<<<
All comments will be put into the >>>RC_ENDING<<< file.  The  text  can  be  read  by
using \fB>>>O_HELP<<<\fP, if OCL variable \fB>>>M_O_VAR<<<\fP is set to
\fIname\fP (keybind creates a constant integer value for \fIname\fP).
Instead of symbolic names, you can also use integer constants
\fInumber\fP (\fB1\fP<=\fInumber\fP<=\fB>>>RC_CLASS_MAX<<<\fP).  The
lines are cut, if they have more than >>>RC_HELP_LEN<<< characters.
.eI
.\"}}}
.LP
Origami compresses the references or
\fB>>>O_DESCRIBE_BINDINGS<<<\fP-data, before adding them to the
>>>RC_ENDING<<<-file. There is a default list of words, which will be
stored with a 2 byte coding. The following command can be used, to
modify this list.
.\"{{{  >>>REF_COMP<<<
.bI "\fB( >>>REF_COMP<<<\fP [\fB>>>SET_COUNTER<<<\fP] \fB(\fP \fIstring\fP .. \fB) )\fP"
All strings \fIstring\fP will be added to the list of compression words.
If \fB>>>SET_COUNTER<<<\fP is used, the list will be set to the empty
list, before adding the strings.
.nB
there can be more than one \fB>>>REF_COMP<<<\fP commands in a OCL source.
.nB
the words are tested in the order of their appearance, so prefixes of
longer words should be defined after the definition of their extensions.
.Ib
.\"}}}
.\"}}}
.\"}}}
.\"{{{  OCL examples
.nH 2 "OCL examples"
.LP
This section includes some commented OCL examples for you to browse
through before starting your own applications.  It is assumed that you
are familiar with Origami before you start programming in OCL.
.\"{{{  simple keybindings
.nH 3 "Bindings keys"
.LP
The following examples show how you can bind commands to (sequences of)
keys and how aliases work.
.\"{{{  first example with return
.eX >>>KEYDEF<<<
.eX C-
.DS
; This is a simple keybind file
(>>>KEYDEF<<< >>>O_RETURN<<< C-M)
.DE
The operation `>>>O_RETURN<<<' is activated by pressing the key C-M.  The
line `>>>O_RETURN<<< C-M' will be included in the keybinding help screens
available to the user.
.\"}}}
.\"{{{  same example with alias
You can achieve the same keybinding by using an alias:
.eX >>>KEYDEF<<<
.eX >>>KEYALIAS<<<
.eX C-
.eX $
.DS
; This keybinding uses >>>KEYALIAS<<<
(>>>KEYALIAS<<< enter C-M)
(>>>KEYDEF<<< >>>O_RETURN<<< $enter)
.DE
The operation `>>>O_RETURN<<<' is activated by C-M as before;
the keybinding help will show `>>>O_RETURN<<< enter'.  If your
terminal sends an unusual sequence of characters for the enter key instead
of the C-M character (very rare), you would just define your own alias for $enter
and leave the comprehensive >>>KEYDEF<<< command unchanged.
.\"}}}
.\"}}}
.\"{{{  byebye
.nH 3 "A small function"
.LP
The first OCL example does not use any control structures.  It defines a
macro named byebye.  You should play a little with such functions/macros
to get used to the compilation process and its (error) messages.
.eX >>>DEFOP<<<
.eX macro
.eX >>>KEYDEF<<<
.eX M-
.DS
; this is an example for a function definition:
( >>>DEFOP<<< byebye
   ( >>>O_BOT_OF_FOLD<<<
     >>>O_START_OF_LINE<<<
     >>>O_RETURN<<<
     >>>O_UP<<<
     "end "  "of " "text
   )
)
.sp
(>>>KEYDEF<<< byebye (M-"x "b "y "e))
.DE
byebye creates a new line containing \fBend of text\fP at the end of the
entered fold.
.\"}}}
.\"{{{  shell version control
.nH 3 "Revision control system"
.LP
Two more little functions deal with RCS.  Note that the check out function
is only for personal use of RCS.  If you are working in a group, someone
else may have edited the file, which will not change your own read only
copy.  The advantage is that you can visit a file and decide if you want
to change it.
.eX >>>DEFMACRO<<<
.eX function
.eX RCS
.eX >>>O_SHELL_COMMAND<<<
.eX view-mode
.DS
(>>>DEFMACRO<<< check-out (
  >>>IF<<< >>>NOT<<<(>>>EDITING<<<)
  (
    >>>O_D_VIEW<<<
    >>>O_SHELL_COMMAND<<< "co "  "-l "  "$>>>ORIFILE<<<
  )
  >>>fi_name<<<
))

(>>>DEFMACRO<<< check-in (
  >>>IF<<< >>>NOT<<<(>>>EDITING<<<)
  (
    >>>O_SAVE_FILE<<<
    >>>O_A_VIEW<<<
    >>>O_SHELL_COMMAND<<< "ci "  "-u "  "$>>>ORIFILE<<<
  )
  >>>fi_name<<<
))
.DE
.\"}}}
.\"{{{  mtool-top
.nH 3 "MTool-version of top-of-fold"
.LP
This a user defined function, simulating the command top-of-fold as it
is used in the mtool system.  The cursor moves to the begin of the
currently opened fold.
.eX TDS
.eX >>>LANG_Inmos<<<
.eX >>>DEFMACRO<<<
.eX function
.DS
; example for a more complex function
(>>>DEFMACRO<<< mtool-top
(
  >>>IF<<< >>>TEST_END_FOLD<<< (>>>O_UP<<<) >>>fi_name<<<
  >>>WHILE<<< >>>AND<<<(>>>NOT<<<(>>>TEST_BEGIN_FOLD<<<),>>>NOT<<<(>>>TEST_TOP<<<))
  (
    >>>IF<<< >>>TEST_END_FOLD<<< (mtool-top) >>>fi_name<<<
    >>>O_UP<<<
  )
))
.DE
While the cursor is not being located on top of a fold (entered or
opened) the cursor is moved up.  If the function finds the end of fold line
from another opened fold, this fold is skipped by a recursive call of
mtool-top.
.\"}}}
.\"{{{  fill-paragraph
.nH 3 "Fill paragraph"
.LP
The next example function is a bit more advanced.  It is too lengthy to
include it here, but it can be found in the file fill-paragraph.
.LP
fill-paragraph fills all lines from cursor position to the next line
with a blank (or a dot in ``roff-mode'') in the first column.  Not text
lines and line, starting wtih fold-comment-start string stop r filling
too.  The first column of a line is here the first character in
currently entered fold, not opened fold!  Filling a line means to add
words from the next line if it is too short or to put words to the next
line if it is to long.  The default right margin is set to column 72.
If there are unfillable lines, fill-paragraph stops filling and
complains.  Fill-column counts from beginning of entered fold
indentation.
.LP
The filling can be done in the following 2 ways:
.Ib
.bI "block-mode"
All `` '' are expanded to ``  '', till the line reaches the fill margin.
.Ib
.bI "shrink-mode"
All ``  '' are replaced by `` '' and the right margin remains unaligned
or ragged.
If language \fBRoff\fP is active, ``. '' is replaced by ``.  ''.
.Ib
.LP
The function set-fill-mode switches between these modes.
.LP
The function auto-wrap can be used instead of `` ''.  If the cursor is
at end of line, the currently typed word is automatically wrapped into a
new line.
.LP
The function set-fill-column allows to change the right margin.  To do
so, you can either use a numeric argument, point to the position of the
new right margin with the cursor or make Origami prompt for the new
column width by moving the cursor to the left margin.
.\"}}}
.\"{{{  goto-matching-fence
.nH 3 "Goto matching fence"
.LP
If you are writing programs, you often want to know which parentheses
match in a complicated expression.  \fBgoto-matching-fence\fP performs
this function.  It uses the character under the cursor to determine if
you are looking for a round, square or curly bracket and if you want to
jump to the opening or the closing one.  If the cursor is not located on
a bracket, nothing will happen.  Otherwise the function searches the
matching fence.  If it cannot find it, it will move back to your old
position.  If necessary, this function opens and closes folds.  Do not
worry if it does not seem to stop searching.  If your text is very long
and there is no fitting fence, you will be amazed how many folds you are
using and how fast they can be opened and closed, but usually
goto-matching-fence will exit gracefully at last.  Remember the
operation can also be interrupted by the abort character (often bound to
C-G).
.\"}}}
.\"{{{  towers-of-hanoi
.nH 3 "The towers of hanoi"
.LP
This is a funny function to demonstrate the power of OCL.  You should
type a string of a few characters without blanks, then start this function
and have fun.
.wA
If you type more than about eight to ten characters, the game will
require a long time.
.\"}}}
.\"{{{  conditional compilation
.nH 3 "Conditional compilation"
.\"{{{  simple example
.LP
A simple example for the usage of conditional compilation:
.eX "Conditional compilation"
.eX @>>>if_u_name<<<
.eX @>>>fi_name<<<
.eX >>>NOT<<<
.DS
@>>>if_u_name<<< (foo)
  \&.\&.\&.  block
@>>>fi_name<<<
.DE
`\&.\&.\&.  block' will only be compiled if the tag \fIfoo\fP is known
as used.  This can be done by an earlier \fB@>>>COMPUSE<<< (\fP\fIfoo\fP\fB)\fP or
by the commandline option \fB-U\fP\fIfoo\fP.
.\"}}}
.\"{{{  file-fold example
.LP
Another example shows the usage of conditional compilation to prevent
multiple compilation of a file:
.eX @>>>if_u_name<<<
.eX @>>>fi_name<<<
.eX >>>COMPUSE<<<
.eX libraries
.DS
@>>>if_u_name<<< >>>NOT<<<(FILENAME)
  @>>>COMPUSE<<< (FILENAME)
  \&.\&.\&.  block
@>>>fi_name<<<
.DE
.LP
This technique is used in the library files in the bindings directory.
.\"}}}
.\"{{{  multiple configurations
.LP
The following example shows, how different keyboards, function and macro
sets etc.\& can be handled properly with one OCL source.  You need only
one tag to choose the correct environment.  This can be done either by
an earlier \fB@>>>COMPUSE<<< (\fP\fI??\fP\fB)\fP or by the command switch
\fB\-U\fP\fI??\fP.
.eX @>>>if_u_name<<<
.eX @>>>fi_name<<<
.eX @>>>COMPUSE<<<
.DS
.\"{{{  set tags
{\&{\&{  choose correct compilation tags
@>>>if_u_name<<< (kbd_1_macros_1)
  @>>>COMPUSE<<< ( kbd_1 mac_1 )
@>>>fi_name<<<
@>>>if_u_name<<< (kbd_2_macros_1)
  @>>>COMPUSE<<< ( kbd_2 mac_1 )
@>>>fi_name<<<
; you can write such statements as well:
@>>>if_u_name<<< (kbd_1_macros_2) @>>>COMPUSE<<< ( kbd_1 mac_2 ) @>>>fi_name<<<
@>>>if_u_name<<< (kbd_2_macros_2) @>>>COMPUSE<<< ( kbd_2 mac_2 ) @>>>fi_name<<<
@>>>if_u_name<<< ( kbd_2_c ) @>>>COMPUSE<<< (kbd_2 c_macs mac_1) @>>>fi_name<<<
}\&}\&}
.\"}}}
.DE
.eX @>>>if_u_name<<<
.eX @>>>fi_name<<<
.DS
.\"{{{  macros
{\&{\&{  macros
\&.\&.\&.  simple macros
@>>>if_u_name<<< (mac_2)
  .\&.\&.F special tex macros
@>>>fi_name<<<
@>>>if_u_name<<< (mac_1)
  .\&.\&.F text edit helps
@>>>fi_name<<<
@>>>if_u_name<<< (c_macs)
  .\&.\&.F c_macros
@>>>fi_name<<<
}\&}\&}
.\"}}}
.DE
.eX @>>>if_u_name<<<
.eX @>>>fi_name<<<
.DS
.\"{{{  kbd
\&{\&{\&{  keyboard mapping
\&.\&.\&.  terminal_keymap (esc,shift,ctrl ... )
@>>>if_u_name<<< (kbd_1)
  .\&.\&.F simple_keys (cursor- and functionkeys)
@>>>fi_name<<<
@>>>if_u_name<<< (kbd_2)
  .\&.\&.F more_complex_keys (cursor- and functionkeys)
@>>>fi_name<<<
}\&}\&}
.\"}}}
.DE
The usage of more descriptive identifiers is left as an exercise for
the reader.
.\"}}}
.\"}}}
.\"{{{  including files
.nH 3 Libraries
.LP
To use a library file, you can use the following 3 techniques:
.\"{{{  filed fold
.eX "filed fold"
.eX >>>include_name<<<
.DS
; to include the file filename
; in the current directory:
\&...F filename
.DE
.\"}}}
or
.\"{{{  >>>include_name<<<
.eX >>>include_name<<<
.eX @>>>include_name<<<
.DS
; to include the file filename
; in the current directory:
@>>>include_name<<< filename
.DE
.\"}}}
or
.\"{{{  >>>LIB<<<
.eX >>>include_name<<<
.eX libraries
.eX @>>>LIB<<<
.DS
; to include a file filename
; in directory dir (dir is part of
; the keybind library path):
@>>>LIB<<< filename
.DE
.\"}}}
.\"}}}
.\"{{{  terminals und modes
.nH 3 "Modes and terminals"
.\"{{{  simple example
.LP
A simple example for the usage of multiple keyboards is the following:
.\"{{{  example
.eX >>>MULTIKBD<<<
.eX >>>KBD<<<
.eX >>>DEFAB<<<
.eX >>>KEYDEF<<<

.DS
(>>>MULTIKBD<<< edit shell)
.DE
.DS
( >>>DEFMACRO<<< shell-commands ( >>>O_A_VIEW<<< shell ) )
( >>>DEFMACRO<<< editing ( >>>O_D_VIEW<<< edit ) )
( >>>DEFAB<<< editing )
.DE
.DS
(>>>KBD<<< edit
  .\&.\&.  bind all normal edit commands
  ( >>>KEYDEF<<< shell-commands ( .. ) )
)
.DE
.DS
(>>>KBD<<< shell
  .\&.\&.  bind commands calling special shell scripts
  ( >>>KEYDEF<<< editing       ( .. ) )
)
.DE
.DS
\&.\&.\&.  some other macros
(>>>KBD<<< shell    ; mode is splitted in 2 definitions
  .\&.\&.  bind commands calling special shell-scripts,part 2
)
.DE
.\"}}}
This enables you to use all normal characters for your
shell commands or predefined system calls.
.\"}}}
.\"{{{  terminals
.LP
Another example shows the usage of terminal dependent bindings.
.\"{{{  example
.eX >>>MULTIKBD<<<
.eX >>>KEYALIAS<<<
.eX >>>TERMINAL<<<
.eX >>>KEYDEF<<<
.DS
(>>>MULTIKBD<<< keyboard)
\&.\&.\&.  aliases for SUN-keyboard
\&.\&.\&.  aliases for PC-keyboard
(>>>KBD<<< keyboard
  .\&.\&.  all normal edit commands
  ( >>>TERMINAL<<< SUN
     .\&.\&.  all SUN keyboard function keys
  )
  ( >>>TERMINAL<<< PC
     .\&.\&.  all PC keyboard function keys
  )
)
.DE
.\"}}}
.LP
Origami loads only one of the given tables, depending on the value of
\fB$>>>ORITERM<<<\fP or \fB$>>>TERM<<<\fP.  The default keyboard uses
none of the additional bindings.
.LP
The following is an example for using terminal dependencies for aliases
too:
.\"{{{  example
.eX >>>MULTIKBD<<<
.eX >>>TERMINAL<<<
.eX autoalias
.eX >>>KBD<<<
.eX >>>KEYDEF<<<
.DS
(>>>MULTIKBD<<< keyboard)
.DE
.DS
\&{\&{\&{  aliases for SUN keyboard - autoalias
; created with 'autoalias -tsun'
( >>>TERMINAL<<< sun
   ( >>>KEYALIAS<<< up ( ... ) )
   \&.\&..
)
\&}\&}\&}
\&.\&.\&.  aliases for PC keyboard  - hand coded
.DE
.DS
(>>>KBD<<< keyboard
  .\&.\&.  all normal edit commands
  ( >>>TERMINAL<<< ( sun PC )
     ( >>>KEYDEF<<< >>>O_UP<<< ( $up ) )
       ; instead of $up, $sun@up and $PC@up
       ; will be used in the two tables
     \&.\&..
  )
)
.DE
.\"}}}
.\"}}}
.\"}}}
.\"{{{  options,startup,hooks
.nH 3 "Command line options, hooks"
.LP
.eX "Command line options"
This example shows, how complex bindings can use their own command line
options.  It also shows, how the semantics of a predefined command can
be changed.  The new command line options \fBnohigh\fP, \fBhigh\fP,
\fBstat\fP and \fBnostat\fP are defined to be used with \fB\-O\fP to
enable, disable the highlighting while creating a fold and the display
of the statusline.
.\"{{{  example
.DS
.eX "Command line options"
.\"{{{  names and modes
\&{{{  names and modes
.eX >>>OCL_ARG_V<<<
.eX >>>BINDNAME<<<
( >>>BINDNAME<<<
   Example
   ( "high "|1^1 ) ( "nohigh "|1   )
   ( "stat "|2^2 ) ( "nostat "|2   )
      ; use bits 0,1 for the two modes
      ; FALSE=default=display on
)
\&}}}
.\"}}}
.\"{{{  variables
\&{{{  variables
( >>>DEFVAR<<< ( startup no-highlighting ) )
\&}}}
.\"}}}
.\"{{{  mode highlighting
\&{{{  mode highlighting
( >>>DEFMACRO<<< add-mode-highlighting
   ( >>>SET_COUNTER<<< no-highlighting 0 )
)
( >>>DEFMACRO<<< delete-mode-highlighting
   ( >>>SET_COUNTER<<< no-highlighting 1 )
)
\&}}}
.\"}}}
.\"{{{  >>>O_CREATE_FOLD<<<
\&{{{  >>>O_CREATE_FOLD<<<
.eX >>>O_CREATE_FOLD<<<
.eX >>>M_O_VAR<<<
( >>>DEFOP<<< >>>O_CREATE_FOLD<<<-orig ( >>>O_CREATE_FOLD<<< ) )
( >>>UNDECLARE<<< ( >>>O_CREATE_FOLD<<< ) )
( >>>DEFMACRO<<< >>>O_CREATE_FOLD<<<
   ( >>>LOC<<<
      ( >>>M_O_VAR<<< )
      ( >>>IF<<< >>>AND<<<(no-highlighting =(0 >>>M_O_VAR<<<))
         ( >>>SET_COUNTER<<< >>>M_O_VAR<<< 5 )
        >>>fi_name<<<
          ; change only, if default
          ; >>>O_CREATE_FOLD<<< should be used!
        >>>O_CREATE_FOLD<<<
      )
   )
)
( >>>UNDECLARE<<< ( >>>O_CREATE_FOLD<<<-orig ) )
\&}}}
.\"}}}
.\"{{{  startup macro
\&{{{  startup macro
( >>>DEMAND<<<
   (
.eX >>>OCL_ARG_V<<<
.eX >>>TEST_TERM<<<
     .\"{{{  startup-fun
     \&{{{  startup-fun
     ( >>>DEFMACRO<<< startup-fun
        ( >>>IF<<< <>(ocl-argument -1)
           ( >>>SET_COUNTER<<< startup ocl-argument )
               ; >>>OCL_ARG_V<<< set by \-O
          >>>fi_name<<<
          .\"{{{  handle bit 2, 0=statusline on
          \&{{{  handle bit 2, 0=statusline on
          >>>IF<<< >=(startup 2)
           ( >>>SET_COUNTER<<< startup -(startup 2)
             statusline-off
           )
          >>>ELSE<<<
           ( statusline-on )
          >>>fi_name<<<
          \&}}}
          .\"}}}
          .\"{{{  handle bit 1, 0=highlighting on
          \&{{{  handle bit 1, 0=highlighting on
          >>>IF<<< >(startup 0)
           ( add-mode-highlighting )
          >>>ELSE<<<
           ( delete-mode-highlighting )
          >>>fi_name<<<
          \&}}}
          .\"}}}
          .\"{{{  slow terminals => no highlighting
          >>>IF<<< >>>TEST_TERM<<< my-old-slow-terminal
           ( delete-mode-highlighting )
          >>>fi_name<<<
          .\"}}}
          >>>SET_COUNTER<<< startup 0
        )
     )
     \&}}}
     .\"}}}
   )
)
\&}}}
.\"}}}
.\"{{{  read-new-file-macro
.eX read-newfile--macro
.eX >>>DEMAND<<<
.eX ">>>LOAD<<< >>>NOT<<<"
\&{{{  read-new-file-macro
( >>>DEFMACRO<<< read-newfile-hook
   ( >>>IF<<< =(startup 0) ( startup-1 ) fi
     ...  any code for new file handling
     >>>IF<<< =(startup 0)
      ( >>>SET_COUNTER<<< startup 1
        >>>LOAD<<< >>>NOT<<<(startup-fun
      )
     >>>fi_name<<<
   )
)
( >>>DEFAUTO<<< read-newfile-hook )
\&}}}
.\"}}}
.\"{{{  >>>DEFAB<<<
.eX >>>DEFAB<<<
\&{{{  >>>DEFAB<<<
( >>>DEFMACRO<<< abort-hook ( >>>SET_COUNTER<<< >>>M_O_VAR<<< 0 ) )
; maybe you hit abort, while the modified
; create fold command is active!
( >>>DEFAB<<< abort-hook )
\&}}}
.\"}}}
:   ; your stuff
.DE
.\"}}}
.\"}}}
.LP
These examples should give an impression of what can be done using OCL.
There are more functions/macros stored in the bindings directory.  I am
sure that you will invent more useful OCL functions/macros.  If you
wrote a really new and good one, please post it to the USENET newsgroup
comp.editors.
.\"}}}
.\"}}}
.\"{{{  Mouse extension
.nH 1 "Mouse extension"
.LP
.iX mouse
On some systems, Origami can be used with a mouse.  The >>>RC_ENDING<<<-file format
is independent from mouse-support.  If Origami is not able to support the
mouse, the corresponding information in the >>>RC_ENDING<<<-file is ignored!
.\"{{{  available mouse-supports
.nH 2 "Available implementations"
.LP
Origami can be used with a mouse in the following window environments:
.\"{{{  X
.nH 3 "X"
.LP
.iX X
.iX xterm
Defining the symbol \fBXTERM\fP at compile time enables the mouse
support for X.  Running Origami inside a \fBxterm\fP will activate
\fIsend mouse position on click\fP by sending '\\033[?9s\\033[?9h' to
the terminal and resetting afterwards.  You can use up to 10 mouse
buttons.  They are named \fBButton1\fP .. \fBButton10\fP in the
bindinglist.  The mouse will only be activated, if the environment
variable \fBTERM\fP is set to \fBxterm\fP or \fBxterm\fP\fIxxx\fP,
\fIxxx\fP any text.  Pressing the mouse will activate the Origami
actions.
.LP
\fBCut\fP/\fBPaste\fP function can be reached (on a standard xterm) via
shift mouse button.  See in your xterm- and X manuals for more details
about mapping the mouse keys.  Use \fBTERM\fP to control the loading of
different keytables for different terminals!
.LP
If Origami is used in an xterm, you can use the command line option
\fB\-T\fP \fItitle\fP to change the window title to the current
filename.  After exiting Origami, the title is set to \fItitle\fP.  If
\fItitle\fP is the empty string, \fBxterm\fP is used.
.LP
After reading the window size once from termcap/terminfo, Origami uses
xterm escape sequences to get the windowsize.
.\"}}}
.\"{{{  MGR
.nH 3 "MGR"
.LP
.iX MGR
Defining the Symbol \fBMGR\fP at compiletime enables the mouse support
for the Bellcore window manager MGR.  Running Origami will activate
\fIsend mouse position on click\fP with \fBm_setevent\fP and resetting
afterwards.  You can use 5 mouse buttons, pressing and releasing the
button are distinguished.  The buttons are named
\fBButton1\fP..\fBButton5\fP, \fBButton1Down\fP..\fBButton5Down\fP in
the bindinglist (MGR does not support \fBButton4\fP and \fBButton5\fP,
\fBButton1\fP is used for window control).  The mouse will only be
activated, if the environment variable \fB>>>TERM<<<\fP is set to
\fBmgr\fP or \fBmgr\fP\fIxxx\fP, \fIxxx\fP any text.  See in your local
mgr manuals for more information about mouse mapping.  Use
\fB>>>ORITERM<<<\fP to control the loading of different keytables for
different terminals!
.\"}}}
.\"{{{  MGR + X
.nH 3 "X and MGR together"
.LP
.iX X
.iX xterm
.iX MGR
MGR and X support can be used together, because the MGR mouse support
uses the escape sequence from the X mouse support to detect a mouse
click.
.LP
Enable both supports by defining XTERM and MGR.
.LP
The commandline option \fB\-T\fP works only, if Origami is used in a
xterm.
.\"}}}
.\"}}}
.\"{{{  multiple supports
.nH 2 "Multiple Mouse supports"
.LP
Different mouse extensions in Origami and keybind (>>>RC_ENDING<<<-file) can be used
together, if
.nI
both use the same `escape sequence' to mark a mouse-click
.In
or
.nI
Origami scans the mouse itself.
.In
In these cases, the mapping of mouse buttons is defined by Origami.
Otherwise the mouse will not work.
.\"}}}
.\"{{{  Using the mouse in OCL
.nH 2 "Using the mouse in OCL"
.LP
.iX xterm
All keytables, not named like a mouse-support use the default
mouse-support (\fBxterm\fP).  This can be changed with \fB\-M
\fP\fIxxx\fP.  If the mouse-support is not set to \fBno-mouse\fP, the
OCL-tags \fBMOUSY\fP and \fIxxx\fP are set and the mouse-variables are
defined.  Otherwise, only the buttons are mapped to commands, but the
mouse-variables are not used and no \fBMOUSY\fP is set!  The mouse can
be used with
.\"{{{  normal click
.LP
.dX >>>MOUSEMAP<<<
\fB(>>>MOUSEMAP<<<\fP \fICOMMAND-FOR-1 COMMAND-FOR-2\fP .. \fB)\fP
.LP
Pressing the mouse button \fIx\fP (number \fIx\fP in the above mentioned
namelists) will activate \fICOMMAND-FOR-x\fP, which can be any Origami
command or OCL function.  If one of the buttons should not be used, bind
\fBno-operation\fP to it.  Only the button numbers are stored in the
>>>RC_ENDING<<<-file.  The names are generated by Origami at runtime, depending on
Origami and its runtime environment.
.\"}}}
.\"{{{  menu counter
.LP
.iX >>>MENU<<<
.iX >>>O_LANGUAGE<<<
If a mouse button is pressed, while \fB>>>O_LANGUAGE<<<\fP or
\fB>>>MENU<<<\fP is active, the click will not return the above.
Instead of the mapped command, a coding for the chosen menu item will
be send.  This is the first character of the chosen item.  Clicks to
invalid positions will be ignored.
.\"}}}
.LP
.dX no-mouse
If the chosen mouse-support is not \fBno-mouse\fP, the following OCL
variables are defined automatically and set on mouse click before
running the command:
.\"{{{  table of vars
.bI ""
.\"{{{  button
.bI "\fB>>>MOUSE_B<<<\fP"
.dX >>>MOUSE_B<<<
number of pressed button
.Ib
.\"}}}
.\"{{{  outside
.bI "\fB>>>MOUSE_O<<<\fP"
.dX >>>MOUSE_O<<<
.iX "display area"
code for type of position
.TS
tab(|);
c l.
value|position
\-2|clicked on message-line
\-1|clicked on area
0|clicked inside text
1|clicked on fold-lines for edited file
2|clicked outside text
.TE
.Ib
.\"}}}
.\"{{{  buffer
.bI "\fB>>>MOUSE_W<<<\fP"
.dX >>>MOUSE_W<<<
   number of buffer
.br
or
.br
   number of used buffers, if clicked on message line or area
.Ib
.\"}}}
.\"{{{  column
.bI "\fB>>>MOUSE_X<<<\fP"
.dX >>>MOUSE_X<<<
.iX "display area"
column number
.br
Inside text you can use \fB>>>GOTO_COUNTER<<<\fP to reach the position.
.Ib
.\"}}}
.\"{{{  line
.bI "\fB>>>MOUSE_Y<<<\fP"
.dX >>>MOUSE_Y<<<
.iX "display area"
line number of mouse position, if in text or area
.br
Inside text you can use \fB>>>O_GOTO_LINE<<<\fP to reach the position.
.Ib
.\"}}}
.\"{{{  steps up/down
.bI "\fB>>>MOUSE_G<<<\fP"
.dX >>>MOUSE_G<<<
contains the number of steps up/down, if inside text
.br
Use \fB>>>O_DOWN<<<\fP (or \fB>>>O_UP<<<\fP if negative) to reach the
position.
.Ib
.\"}}}
.Ib
.\"}}}
.\"}}}
.\"}}}
.\"{{{  Miscellaneous
.nH 1 "Miscellaneous"
.LP
If a document is to be loaded for the first time you should verify that
it does not contain strings which could be misinterpreted as fold marks
by Origami.  The following simple shell script looks for such strings.
.eX mark
.DS
fgrep '{\&{\&{' <filename>
fgrep '}\&}\&}' <filename>
fgrep ':\&:\&:' <filename>
.DE
.\"}}}
.\"{{{  Copyrights
.nH 1 "Copyright appointments"
.LP
This chapter was not included in earlier versions, but a discussion on
USENET convinced me to write it.  Please read it carefully.
.LP
Each part of this software can and must be copied free.  If you copy
binaries, you must not prevent people from also copying sources.  You
must not remove my name from this program.  If you want to use parts of
it for your own purposes, point out what is your code and what is mine.
You use this software completely at your own risk.
.LP
No part of this software may be used for military purposes.
No exceptions will be made to this clause.
.LP
If someone wants to use this software even in part for
commercial purposes,  a written non exclusive license is needed.
.LP
There are no long remarks in the other files of this package about
copyright because program code and comments about it are two different
things, but the above conditions are valid for the whole package!
.\"}}}
.\"{{{  Acknowledgements
.nH 1 "Acknowledgements"
.LP
Most of this manual was written by me, but the original was written by
someone else, who did not leave his name in it.  The concept of the
folding editor was originally implemented as part of the Transputer
development system at INMOS Ltd., Bristol, UK.  The editor was a part of
the TDS D700, and was written in Occam.  It first ran on a 68000 based
Sage/Stride development system, and later was Transputer resident on the
PC development system.
.LP
Origami was rewritten from scratch in Turbo Pascal by Martin Green while
at Ferranti Ltd, Cheadle Heath, Stockport, England, and used the same
key mappings and editor functions as the TDS editor.
.LP
It was then converted from Turbo Pascal by p2c and ported by Charlie
Lawrence, while at Eastman Kodak Co.  He added lex/yacc based keyfiles,
and did the considerable work needed to get it running in C.
.LP
I fixed some bugs in memory management and elsewhere, ported it to
MINIX and later to Linux, changed its user interface to look more
Emacs-like and added new features.  Wolfgang Stumvoll (stumvoll\*(ac)
wrote the OCL code and the keybind compiler.  He also made beta tests of
all my new versions by using them for his daily work, which helped a lot
to find existing and new bugs.  Last but not least, he wrote the OCL
fill-paragraph, goto-matching-fence and towers-of-hanoi functions.  Both of
us made a general code clean up, which was much overdue.
.LP
Michael Schwingen (michaels\*(ac) ported Origami to Atari TOS and fixed
a few minor bugs.  He decided against his port being archived on the ftp
server mentioned below, so only he knows about the available version and
where to get it.
.LP
Thomas Hadig (hadig\*(ac) ported Origami to Amiga DOS.  His port is available
on the below mentioned ftp server.  Usually, it is up to date with the current
official release.
.LP
Robert Blum (blum\*(ac) once ported an early version back to MS/PC DOS.
.LP
Andrew Miller (windy\*(ac) spent much time proofreading the
documentation and is still writing the vi Emulation.  He tested most new
versions on his MINIX machine as well.
.LP
Stephen R.\& van den Berg (berg\*(ac) provided the POSIX compatible
`Better/BuGless/Berg Regular Expression' library (bregex).
.LP
There are too many other people in different nets all around the world, who helped
with small tips, bug reports etc.\& to improve Origami.  Thanks to all
of you.
.LP
I maintain the whole Origami source code, which means that I will answer
or forward mail concerning Origami, decide if and how extensions should
be made, give advices for people who are porting it, post new UN*X
versions and update the documentation.  I put new releases of
Origami on the ftp archive ftp.thp.uni-koeln.de [134.95.64.1], path
pub/linux/origami.  If you can not reach that server, try [134.95.80.1],
path pub/thp/linux/origami.
.\"}}}
.\"{{{  Appendixes
.nH 1 "Appendixes"
.\"{{{  re
.nH 2 "Regular expressions"
.LP
This version of Origami supports regular expression search and replace.
Origamis regular expressions widely conform \fBPOSIX\fP
\fBextended\fP/\fBbasic\fP regular expressions.
.\"{{{  search syntax
.nH 3 "Regular search expressions"
.LP
Due to the internal text representation, it is impossible to use regular
expressions matching strings, containing newline characters.
.LP
Origami does not support \fBbackreference expression\fPs in basic regular
search expressions.
.LP
The following is a table of known operators in basic/extended regular
expressions.  Refer to your local regular expression documentation for more
details.  basic (extended) regular subexpressions are marked with
\fIBRegExp\fP(\fIExRegExp\fP).
.\"{{{  table of commands
.TS
center tab(@);
c c.
\fBbasic\fP@\fBextended\fP

.\"{{{  char
.T&
c c
l s.
\fIc\fP@\fIc\fP
T{
Each character, not used for special purpose, matches itself.
T}


.\"}}}
.\"{{{  .
.T&
c c
l s.
\fB.\fP@\fB.\fP
T{
.dX .
Matches any single character.
T}


.\"}}}
.\"{{{  []
.T&
c c
c c
l s.
\fB[\fP\fIclass\fP\fB]\fP@\fB[\fP\fIclass\fP\fB]\fP
\fB[^\fP\fIclass\fP\fB]\fP@\fB[^\fP\fIclass\fP\fB]\fP
T{
.dX [
.dX ]
.iX set
Matches a character [not] given in the brackets.  \fIclass\fP can be a
list of:
.br
  \fIchar\fP - a single character
.br
  character range - marked with \fIchar\fP\fB\-\fP\fIchar\fP
.br
or
.br
  \fB[:\fP\fIset\fP\fB:]\fP - \fIset\fP=\fB>>>ALPHA_STR<<<\fP, ..
.br
    \fIset\fP is a predefined character set
.br
    user defined sets cannot be used

.iX "character set"
.br
.br
The following expressions are currently not support:
.br
.br
  Collating symbols \fB[. .]\fP
.br
  Equivalence class expressions \fB[= =]\fP
T}


.\"}}}
.\"{{{  ^
.T&
c c
l s.
\fB^\fP@\fB^\fP
T{
.dX ^
Matches the start of the line, if used at the start of an expression.
T}


.\"}}}
.\"{{{  $
.T&
c c
l s.
\fB$\fP@\fB$\fP
T{
.dX $
Matches the end of the line, if used at the end of an expression.
T}


.\"}}}
.\"{{{  RE RE
.T&
c c
l s.
\fIBRegExp\fP\h'\w'|'u'\fIBRegExp\fP@\fIExRegExp\fP\h'\w'|'u'\fIExRegExp\fP
T{
Matches the concatenation of strings, matching the first/second regular
expressions.
T}


.\"}}}
.\"{{{  ()
.T&
c c
l s.
\fB\e(\fP\fIBRegExp\fP\fB\e)\fP@\fB(\fP\fIExRegExp\fP\fB)\fP
T{
.dX (
.dX )
Group the enclosed regular expression, which can be accessed by \fB\e\fP\fIx\fP
in the replace pattern.
T}


.\"}}}
.\"{{{  |
.T&
c c
l s.
\fIBRegExp\fP\fB\e|\fP\fIBRegExp\fP@\fIExRegExp\fP\fB|\fP\fIExRegExp\fP
T{
.dX |
Matches a string, matching one of the given regular expressions.
.br
\fBN.B.\fP: \fB\e|\fP is an extension in basic regular expressions.
T}


.\"}}}
.\"{{{  +
.T&
c c
l s.
\fIBRegExp\fP\fB\e+\fP@\fIExRegExp\fP\fB+\fP
T{
.dX +
Matches one or more occurances of the given regular expression.
.br
\fBN.B.\fP: \fB\e+\fP is an extension in basic regular expressions.
T}


.\"}}}
.\"{{{  ?
.T&
c c
l s.
\fIBRegExp\fP\fB\e?\fP@\fIExRegExp\fP\fB?\fP
T{
.dX ?
Matches zero or one occurances of the given regular expression.
.br
\fBN.B.\fP: \fB\e?\fP is an extension in basic regular expressions.
T}


.\"}}}
.\"{{{  *
.T&
c c
l s.
\fIBRegExp\fP\fB*\fP@\fIExRegExp\fP\fB*\fP
T{
.dX *
Matches zero or more occurances of the given regular expression.
T}


.\"}}}
.\"{{{  {}
.T&
c c
c c
l s.
\fIBRegExp\fP\fB\e{\fP\fIn\fP\fB\e}\fP@\fIExRegExp\fP\fB{\fP\fIn\fP\fB}\fP
\fIBRegExp\fP\fB\e{\fP\fIn\fP\fB,\fP\fIm\fP\fB\e}\fP@\fIExRegExp\fP\fB{\fP\fIn\fP\fB,\fP\fIm\fP\fB}\fP
T{
.dX {
.dX }
Repeats the regular expression \fIn\fP [to \fIm\fP] times.  \fIn\fP[,\fIm\fP]
have to be decimals, 0<=\fIn\fP[<=\fIm\fP].
T}


.\"}}}
.\"{{{  !
.T&
c c
l s.
\fB\e!\fP\fIBRegExp\fP@\fB!\fP\fIExRegExp\fP
T{
.dX !
Match the next line, not containing the following regular expression.
[\fB\e\fP]\fB!\fP is only allowed at the beginning of a regular
expression.
.br
\fBN.B.\fP: [\fB\e\fP]\fB!\fP is an extension in basic and extended
regular expressions.
T}


.\"}}}
.TE
.\"}}}
.\"}}}
.\"{{{  replace syntax
.nH 3 "Regular replace expressions"
.LP
Inside regular expression search and replace, the replace pattern may
contain the following subexpressions:
.\"{{{  table of commands
.TS
center tab(@);
c c.
\fBbasic\fP@\fBextended\fP

.\"{{{  char
.T&
c c
l s.
\fIcharacter\fP@\fIcharacter\fP
T{
Each character, not used for special purpose.
T}


.\"}}}
.\"{{{  \N
.T&
c c
l s.
\fB\e\fP\fIN\fP@\fB\e\fP\fIN\fP
T{
.dX \\\\e
Is the text, matched by the \fIN\fP-th group.
.br
This can only be used, if there is a corresponding \fB(\fP..\fB)\fP pair
in the search expression!
.br
\fIN\fP is [\fBg\fP\fIdigit\fP]*\fIdigit\fP (\fBg\fP is used, to mark
numbers >9!).
T}


.\"}}}
.\"{{{  \uN
.T&
c c
l s.
\fB\eu\fP\fIN\fP@\fB\eu\fP\fIN\fP
T{
.dX \\\\eu
Is the text, matched by the \fIN\fP-th group with lowercase letters
converted to uppercase.
.br
This can only be used, if there is a corresponding \fB(\fP..\fB)\fP pair
in the search expression!
.br
\fIN\fP is [\fBg\fP\fIdigit\fP]*\fIdigit\fP (\fBg\fP is used, to mark
numbers >9!).
T}


.\"}}}
.\"{{{  \lN
.T&
c c
l s.
\fB\el\fP\fIN\fP@\fB\el\fP\fIN\fP
T{
.dX \\\\el
Is the text, matched by the \fIN\fP-th group with uppercase letters
converted to lowercase.
.br
This can only be used, if there is a corresponding \fB(\fP..\fB)\fP pair
in the search expression!
.br
\fIN\fP is [\fBg\fP\fIdigit\fP]*\fIdigit\fP (\fBg\fP is used, to mark
numbers >9!).
T}


.\"}}}
.\"{{{  \{Nexpr}
.T&
c c
l s.
\fB\e{\fP\fINexpr\fP\fB}\fP@\fB\e{\fP\fINexpr\fP\fB}\fP
T{
.iX \\\\e
.dX \\\\e{
.dX {
.dX }
Use the first characters of \fIexpr\fP, up to the length of the
\fIN\fP-th group in the search string.  If \fIexpr\fP is not long
enough, the last character will be repeated up to the needed length.  If
\fIfIexpr\fP is the empty string, space will be used for padding.
.dX \\\\e0
\fB\e0\fP can be used as last character in \fIexpr\fP to suppress padding.
.br
This can only be used, if there is a corresponding \fB(\fP..\fB)\fP pair
in the search expression!
.br
\fIN\fP is [\fBg\fP\fIdigit\fP]*\fIdigit\fP (\fBg\fP is used, to mark
numbers >9!).
T}


.\"}}}
.\"{{{  \?Nexpr}
.T&
c c
l s.
\fB\e?\fP\fINexpr\fP\fB}\fP@\fB\e?\fP\fINexpr\fP\fB}\fP
T{
.iX \\\\e
.dX \\\\e?
.dX ?
.dX }
If the \fIn\fP-th group matched, add \fIexpr\fP, otherwise the empty
string.
.br
\fIN\fP is [\fBg\fP\fIdigit\fP]*\fIdigit\fP (\fBg\fP is used, to mark
numbers >9!).
T}


.\"}}}
.\"{{{  \!Nexpr}
.T&
c c
l s.
\fB\e!\fP\fINexpr\fP\fB}\fP@\fB\e!\fP\fINexpr\fP\fB}\fP
T{
.iX \\\\e
.dX \\\\e!
.dX !
.dX }
If the \fIn\fP-th group did not match, add \fIexpr\fP, otherwise the
empty string.
.br
\fIN\fP is [\fBg\fP\fIdigit\fP]*\fIdigit\fP (\fBg\fP is used, to mark
numbers >9!).
T}


.\"}}}
.\"{{{  \}
.T&
c c
l s.
\fB\e}\fP@\fB\e}\fP
T{
.iX \\\\e
Use inside of complex replace expressions to generate a single \fB}\fP.
T}


.\"}}}
.\"{{{  \ \ ;
.T&
c c
l s.
\fB\e\e\fP@\fB\e\e\fP
T{
.iX \\\\e
Represent \fB\e\fP.
T}


.\"}}}
.TE
.\"}}}
.\"}}}
.\"}}}
.bp
.\"{{{  messages
.nH 2 "Messages"
.\"{{{  what are the messages
.LP
.iX ".origami>>>MSG_ENDING<<<"
The following is the list of all messages, Origami can display and
which can be used in OCL-commands using the Origami messages. They are
stored in the file \fB.origami>>>MSG_ENDING<<<\fP and can be changed by editing this
file. If you are doing this, do not change the length of the lines, the
type and order of the used formats.
.\"}}}
.\"{{{  description of types
.LP
Different messages are used in different ways. The first character of
the message-name indicates the usage:
.\"{{{  known tags
.nI
.TS
tab(|);
l l.
\fBD\fP|display-characters:
|specifying some display-details
\fBF\fP|format strings:
|should only used with \fB>>>LASTMES<<<\fP
\fBI\fP|prompt strings:
|first character is used for \fByes\fP,..
\fBM\fP|strings to be displayed
.TE
.In
.\"}}}
.LP
If \fBF_\fP\fIxxx\fP messages are used inside OCL-prompts, string
arguments are replaced by empty strings, integer and character arguments
are replaced by undefined numbers/characters.
.\"}}}
.LP
The known messages are:
.\"{{{  list of messages (automatically generated by make!)
.so msg.AMS
.\"}}}
.\"}}}
.bp
.\"{{{  OCL-assembler
.nH 2 "OCL-assembler"
.LP
.nH 3 "Syntax"
.LP
There are commands with different kinds of arguments.  The following
command-types are known:
.\"{{{  table of known types
.nI
.ne 8
.TS
center tab(|);
l l.
COM|without arguments
COM_I|with variable/integer argument
COM_C|with character argument
COM_A|with address argument
COM_II|with 2 variable/integer arguments
COM_P|with message-string argument
COM_IP|with variable/integer and message-string arguments
COM_IIP|with 2 variable/integer and message-string arguments
.TE
.In
.\"}}}
.LP
OCL-assembler statements are (OCL-assembler programs are not handled by
the optimizer!):
.\"{{{  label
.bI "\fB\&.\fP\fIlabel\fP
Each unused identifier can be used as a label.  No code will be
generated, but \fIlabel\fP can be used for jump-commands.  The
definition of a label has to be marked with a leading \fB.\fP.
.Ib
.\"}}}
.\"{{{  origami functions/macros
.bI "Origami functions and macros"
All Origami functions and OCL-macros with length 1 (\fB>>>DEFMACRO<<<\fPs or
single command \fB>>>DEFOP<<<\fPs or \fBinit_fun\fPs).
.Ib
.\"}}}
.\"{{{  >>>EVAL<<<
.bI "\fB>>>EVAL<<< (\fP \fIstatement\fP ... \fB)\fP"
Compile the OCL program '\fIstatement\fP ...'.  The assembler program
calls it as subroutine.  The compiled list of OCL-statements might be
optimized.
.Ib
.\"}}}
.\"{{{  number
.sI "\fBnumber\fP"
.Is
.\"}}}
.\"{{{  text
.sI \fB"\fP\fItext\fP
.Is
.\"}}}
.\"{{{  statement
.bI "\fIcommand\fP [\fIargument\fP [\fIargument\fP [\fIargument\fP]]]
\fIcommand\fP is one of the OCL-assembler statements, explained below.
\fIargument\fPs are (depending on commandtype of \fIstatement\fP):
.\"{{{  int
.bI "integer argument:"
.\"{{{  var
.bI "[\fB+\fP \fInumber\fP] ... \fIvariable-name\fP"
The following variable names are hidden variables, used by keybind to
code the OCL-statements.  These variables can be used only in
OCL-assembler code directly!
.TS
tab(|);
l l.
\fB(dummy\fP\fIx\fP\fB)\fP,\fIx\fP=0,1,...|term evaluation
\fB(arg\fP\fIx\fP\fB)\fP,\fIx\fP=0,1,...|argument passing
\fB(loc\fP\fIx\fP\fB)\fP,\fIx\fP=0,1,...|save arguments
\fB(repeat)\fP|used for \fB>>>REPEAT<<<\fP
\fB(return)\fP|return value for functions/macros
\fB(rel_op)\fP|\fB<\fP,.. #arguments > 2
.TE
.Ib
.\"}}}
.\"{{{  number
.bI "[\fB+\fP \fInumber\fP] ... \fIvar-address\fP"
\fIvar-address\fP is a non negative integer constant.
.Ib
.\"}}}
.\"{{{  msg
.bI "[\fB+\fP \fInumber\fP] ... \fImessage-name\fP"
The coding of \fImessage-name\fP, which is one of the above listed
messages, stored in \fB.origami>>>MSG_ENDING<<<\fP.
.Ib
.\"}}}
.Ib
.\"}}}
.\"{{{  char
.bI "character argument:"
.sI "\fInumber\fP, \fInumber\fP>=0"
.Is
.sI \fB"\fP\fIcharacter\fP
.Is
.Ib
.\"}}}
.\"{{{  address
.bI "address argument:"
.\"{{{  label
.bI "[\fB+\fP \fInumber\fP] ... \fIlabel\fP"
Use address \fIlabel\fP with given offset as target address.
.Ib
.\"}}}
.\"{{{  offset
.bI "[\fB+\fP \fInumber\fP] ... \fIjump-offset\fP"
Use the sum of given values as relative jump offset.
.Ib
.\"}}}
.Ib
.\"}}}
.\"{{{  message-strings
.bI "message-string argument"
\fImessage-string\fP uses the same syntax as in normal OCL-statements.
You have to add a \fBM_END_MACRO\fP yourself, to mark the end of the
message-string!
.LP
For example:
.sI "\fBM_PROMPT 2 ( M_ABORTED >>>COUNTER<<< x ) M_END_MACRO\fP"
.Is
.Ib
.\"}}}
.Ib
.\"}}}
.nH 3 "Commands"
.LP
.\"{{{  table of commands (automatically generated by make!)
The permission tags, used in the following table mean:
.\"{{{  *
.bI *
Always allowed, handled in innermost OCL-automat.
.Ib
.\"}}}
.\"{{{  -
.bI -
Allowed, if no view-mode, folding or other restrictions are active.
.Ib
.\"}}}
.\"{{{  V
.bI V
.iX view-mode
Allowed during view.
.Ib
.\"}}}
.\"{{{  P
.bI P
Allowed in prompts.
.Ib
.\"}}}
.\"{{{  F
.bI F
.iX >>>O_CREATE_FOLD<<<
Allowed during create fold.
.Ib
.\"}}}
.\"{{{  f
.bI f
.iX >>>O_CREATE_FOLD<<<
Not allow during create fold, but can be used, while the extended
highlighting is active.
.Ib
.\"}}}
The known assembler statements are:
.so token.AMS
.\"}}}
.\"}}}
.bp
.\"{{{  command line options
.nH 2 "Command line options"
.LP
The following is part of the online help.  Origamis usage is
.DS
\fBorigami\fP [\fIoption\fP ...] [\fIfile\fP ...]
.DE
where \fIoptions\fP can be:
.\"{{{  list off known options
.\"{{{  define iP: [.Ib] .bI
.nr iP 0
.de iP
.ie \\n(iT .Ib
.el .nr iT 1
.bI "\\$1"
..
.\"}}}
.\"{{{F ../man/o-opt.sed.MAN
.\":::F ../man/o-opt.sed.MAN
.\"}}}
.so ../man/o-opt.sed.MAN
.Ib
.\"}}}
.\"}}}
.bp
.\"{{{  compiletime configuration
.nH 2 "Compiletime Configuration"
.LP
There are many parameters, which can be changed at compiletime.  More
details about changings these constants are given in the source of this
distribution. A short list of the possible changes follows.
.wA
Changing these constants may produce incompatible >>>RC_ENDING<<<-files!
.\"{{{  Languages
.bI "Languages"
The predefined languages for fold hiding can be changed.
.Ib
.\"}}}
.\"{{{  constants
.bI "Constants"
Some constants describing table sizes and string length:
.\"{{{  DEFAULT_LINELEN
.sI "linelength (>>>LINELEN<<<)"
.Is
.\"}}}
.\"{{{  TDS_LEN
.sI "length of TDS lines (>>>TDS_LEN<<<)"
.Is
.iX TDS
.iX language
.\"}}}
.\"{{{  FOLD_COMMENT_LENGTH
.sI "length of user comment strings (>>>FOLD_COMMENT_LENGTH<<<)"
.Is
.iX comment
.iX folding
.iX language
.dX >>>O_LANGUAGE<<<
.\"}}}
.\"{{{  SHORT_F_C_LENGTH
.sI "cut length for user comment strings in statusline(>>>SHORT_F_C_LENGTH<<<)"
.Is
.iX folding
.iX comment
.dX >>>O_LANGUAGE<<<
.iX language
.iX "status line"
.\"}}}
.\"{{{  DEFAULT_UNDEL
.sI "size of delete-buffer (>>>UNDEL_LINES<<<)"
.Is
.iX "delete buffer"
.iX >>>O_DEL_LINE<<<
.\"}}}
.\"{{{  MAX_MACRO_LENGTH
.sI "length of keyboard macros (>>>MAX_MACRO_LENGTH<<<)"
.Is
.iX >>>O_DEF_MACRO<<<
.iX macro
.\"}}}
.\"{{{  NAME_LG
.sI "identifier length (>>>NAME_LG<<<)"
.Is
.iX name
.\"}}}
.\"{{{  BIND_NAME_LEN
.sI "length of binding names and command line aliases (>>>BIND_NAME_LEN<<<)"
.Is
.iX >>>BINDNAME<<<
.iX "Command line options"
.\"}}}
.\"{{{  FOLD_PATTERN_LEN
.sI "length of mark names (>>>FOLD_PATTERN_LEN<<<)"
.Is
.iX >>>DEFMARK<<<
.\"}}}
.\"{{{  ALIAS_LG
.sI "length of keysequences (>>>ALIAS_LG<<<)"
.Is
.iX keysequence
.iX >>>KEYALIAS<<<
.iX >>>KEYDEF<<<
.\"}}}
.\"{{{  RC_HELP_LEN
.sI "line length in help (>>>RC_HELP_LEN<<<)"
.Is
.iX .origamirc
.iX .origami>>>HELP_ENDING<<<
.\"}}}
.\"{{{  OCL_CODE_LEN
.sI "OCL statement length (>>>OCL_CODE_LEN<<<)"
.Is
.iX macro
.iX function
.\"}}}
.\"{{{  OCL_FILE_DEPTH
.sI "OCL filed-fold stack depth (>>>OCL_FILE_DEPTH<<<)"
.Is
.\"}}}
.\"{{{  MODE_COUNT
.sI "number of user modes (>>>MODE_COUNT<<<)"
.Is
.iX >>>DEFMODE<<<
.\"}}}
.\"{{{  MIN_ALARMTIME
.sI "minimum auto-save time (>>>MIN_ALARMTIME<<<)"
.Is
.iX autosave-mode
.iX >>>O_A_AUTO_SAVE<<<
.iX >>>O_D_AUTO_SAVE<<<
.\"}}}
.\"{{{  MAX_ALARMTIME
.sI "maximum auto-save time (>>>MAX_ALARMTIME<<<)"
.Is
.iX autosave-mode
.iX >>>O_A_AUTO_SAVE<<<
.iX >>>O_D_AUTO_SAVE<<<
.\"}}}
.\"{{{  NORM_ALARMTIME
.sI "default auto-save time (>>>NORM_ALARMTIME<<<)"
.Is
.iX autosave-mode
.iX >>>O_A_AUTO_SAVE<<<
.iX >>>O_D_AUTO_SAVE<<<
.\"}}}
.\"{{{  HISTORY_SIZE
.sI "history minimum size (>>>HISTORY_SIZE<<<)"
.Is
.iX history
.\"}}}
.\"{{{  HISTORY_MAX
.sI "history maximum size (>>>HISTORY_MAX<<<)"
.Is
.iX history
.\"}}}
.\"{{{  NO_OCL_CMD_OPTS
.sI "number of command line aliases (>>>NO_OCL_CMD_OPTS<<<)"
.Is
.iX "Command line options"
.\"}}}
.\"{{{  DIM_OCL_CMD_OPTS
.sI "dimension of \fB>>>OCL_ARG_RECORD_V<<<\fP (>>>DIM_OCL_CMD_OPTS<<<)"
.Is
.iX ">>>OCL_ARG_RECORD_V<<<"
.\"}}}
.\"{{{  number of regular expression patterns
.sI "regular replace patterns (>>>PAT_COUNT<<<)"
.Is
.iX regular expression
.\"}}}
.Ib
.\"}}}
.\"{{{  env-vars
.bI "Environment variables"
The names for the environment variables:
.\"{{{  HOME
.sI \fB>>>HOME<<<\fP
.Is
.iX >>>HOME<<<
.\"}}}
.\"{{{  TERM
.sI \fB>>>TERM<<<\fP
.Is
.iX >>>TERM<<<
.\"}}}
.\"{{{  SHELL
.sI \fB>>>SHELL<<<\fP
.Is
.iX >>>SHELL<<<
.\"}}}
.Ib
.\"}}}
.\"{{{  strings
.bI "Strings"
You can change the following strings:
.\"{{{  msg
.bI "\fB\&.origami>>>MSG_ENDING<<<\fP"
.iX ".origami>>>MSG_ENDING<<<"
All formats, given in \fB.origami>>>MSG_ENDING<<<\fP can be changed by changing the
default file.
.Ib
.\"}}}
.\"{{{  ORIGAMI_RC_PATH
.bI "default resource path"
.iX >>>ORIPATH<<<
.iX >>>ORIPATH_1<<<
the default value for the environment variable \fB>>>ORIPATH<<<\fP
(>>>ORIGAMI_RC_PATH_STRING<<<)
.Ib
.\"}}}
.\"{{{  KBD_PATH
.bI "default keybind library path"
.iX >>>KBDPATH<<<
.iX >>>KBDPATH_1<<<
the default value for environment variable \fB>>>KBDPATH<<<\fP
(>>>KBD_PATH_STRING<<<)
.Ib
.\"}}}
.\"{{{  View
.sI "\fB>>>VIEW_TAG<<<\fP/\fB>>>sVIEW_TAG<<<\fP"
.Is
.iX >>>VIEW_TAG<<<
.iX >>>sVIEW_TAG<<<
.iX view-mode
.iX >>>O_A_VIEW<<<
.iX >>>O_D_VIEW<<<
.iX "status line"
.\"}}}
.\"{{{  DirView
.sI "\fB>>>DV_TAG<<<\fP/\fB>>>sDV_TAG<<<\fP"
.Is
.iX >>>DV_TAG<<<
.iX >>>sDV_TAG<<<
.iX directory
.iX "status line"
.\"}}}
.\"{{{  DefMac
.sI "\fB>>>DM_TAG<<<\fP/\fB>>>sDM_TAG<<<\fP"
.Is
.iX >>>DM_TAG<<<
.iX >>>sDM_TAG<<<
.iX macro
.iX >>>O_DEF_MACRO<<<
.iX "status line"
.\"}}}
.\"{{{  Folding
.sI "\fB>>>FOLD_TAG<<<\fP/\fB>>>sFOLD_TAG<<<\fP"
.Is
.iX >>>FOLD_TAG<<<
.iX >>>sFOLD_TAG<<<
.iX folding
.iX >>>O_CREATE_FOLD<<<
.iX "status line"
.\"}}}
.\"{{{  Over
.sI "\fB>>>OVER_TAG<<<\fP/\fB>>>sOVER_TAG<<<\fP"
.Is
.iX >>>OVER_TAG<<<
.iX >>>sOVER_TAG<<<
.iX overwrite-mode
.iX >>>O_D_OVER<<<
.iX >>>O_A_OVER<<<
.iX "status line"
.\"}}}
.\"{{{  AutoSave
.sI "\fB>>>AUTO_TAG<<<\fP/\fB>>>sAUTO_TAG<<<\fP"
.Is
.iX >>>O_D_AUTO_SAVE<<<
.iX >>>O_A_AUTO_SAVE<<<
.iX autosave-mode
.iX >>>AUTO_TAG<<<
.iX >>>sAUTO_TAG<<<
.iX "status line"
.\"}}}
.\"{{{  NoParse
.sI "\fB>>>NOPAR_TAG<<<\fP/\fB>>>sNOPAR_TAG<<<\fP"
.Is
.iX >>>O_D_NOPARSE<<<
.iX >>>O_A_NOPARSE<<<
.iX no-parse-mode
.iX >>>NOPAR_TAG<<<
.iX >>>sNOPAR_TAG<<<
.iX "status line"
.\"}}}
.\"{{{  hash-shift
.sI "\fB>>>H_SHIFT_TAG<<<\fP"
.Is
.iX "status line"
.\"}}}
.\"{{{  CUT_PATH
.sI "\fB>>>CUT_PATH<<<\fP"
.Is
.iX "status line"
.\"}}}
.Ib
.\"}}}
.\"}}}
.\"}}}